KOHLER K-1947-GHRA 60 x 30 alcove Heated Bubble Massage air bath Owner’s Manual
- July 20, 2024
- Kohler
Table of Contents
KOHLER K-1947-GHRA 60 x 30 alcove Heated Bubble Massage air bath
Product Information
Specifications:
- Product: 60 x 30 alcove Heated BubbleMassageTM air bath, right drain
- Model: K-1947-GHRA
- Water Capacity: 57 gal (215.8 L)
- Weight: 113 lbs (51.3 kg)
- Electrical Components: Blower – 120 V, 10 A, 60 Hz; Heater – 120 V, 5 A, 60 Hz
- Water Depth: 15-1/8″ (384 mm)
- Minimum Flat for Door: 2-9/16″ (66 mm)
- Drain Location: Right
Product Usage Instructions
Installation:
Follow the provided installation instructions carefully. Ensure two
dedicated circuits are available, protected with a Ground-Fault Circuit-
Interrupter. Install according to the electrical requirements specified.
Maintenance:
Regularly clean the bath with recommended products like K-23732 Tub &
Shower Cleaner. Follow maintenance guidelines to ensure optimal performance.
Usage:
- Fill the bath with hot water up to the desired level, ensuring it meets the recommended capacity.
- Turn on the BubbleMassageTM feature for a relaxing experience.
- After use, allow air channels to dry before draining the water.
FAQ:
-
Q: What is the recommended water temperature for optimal performance?
A: The hot water supply should be at least 70% of the bath’s capacity or greater for best results. -
Q: How do I relocate the blower for servicing?
A: A remote blower installation kit is available for relocating the blower. Follow the provided instructions carefully and ensure access for servicing.
Features
- 120 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust massage intensity to 18 levels
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral apron
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Technology
- Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
- User interface: electronic keypad control
Installation
- Right drain
- Alcove
Required Products/Accessories
-
K-7271 Brass Slotted Overflow Bath Drain
or -
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- K-1446 Remote Installation Kit
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
- K-31797 Slotted overflow bath drain kit
- K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
- IAPMO Certification
- cUL Listed
- UL Listed
KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER®
Hydrotherapy Components Five-Year Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
DIMENSION
Required Electrical Service
Two dedicated circuits required, protected with Class A GroundFault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
- Blower: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Right
- Weight: 113 lbs (51.3 kg)
- Minimum floor load: 48.2 lbs/ft² (235.3 kg/m²)
- Water depth: 15-1/8″ (384 mm)
- Water capacity: 57 gal (215.8 L)
- Electrical component rating:
- Blower: 120 V, 10 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
- Minimum flat for door: 2-9/16″ (66 mm)
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly.
- ADA compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada
2-29-2024 20:43 – US
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>