veho MR-7 Retro Wireless Speaker User Guide
- June 6, 2024
- veho
Table of Contents
MR-7
Retro wireless speaker
Hello
IMPORTANT!
How to get the most out of your speaker To prolong the life of your MR7
speaker the battery should be fully discharged and recharged every few months.
Leaving the battery for long periods without use could reduce battery
efficiency until it no longer holds a charge.
Always charge the speaker with the supplied cable and a compatible power
source, failure to do so could invalidate the warranty.
Contents MR-7 Bluetooth® speaker, USB power cable and
line-in cable.
Charging the speaker The LED indicator will turn red when
charging, turning off completely once fully charged.
Low battery indicator When the battery is low the red LED
will flash twice every four seconds and the speaker will beep.
Pairing with a device Press and hold the power button for
2 seconds to turn on, the speaker will automatically enter pairing mode. On
your device select ‘Veho MR7’ from the Bluetooth ® menu. The next time you
turn the speaker on it will automatically connect with your device.
Line-in cable Turn the speaker on. Connect the line-in
cable to the speaker and an audio source. Only the volume controls work when
connected via line-in, you cannot skip or pause tracks.
Power on/off Press the power button for 2 seconds to turn
on, then press again for 2 seconds to turn off.
Volume down/Previous track Press the ( ) button for once
to skip to the previous track. Press and hold to reduce the volume.
Volume up/Next track Press the ( ) button for once to skip
to the next track. Press and hold to increase the volume.
Play/Pause/Close Bluetooth Press the ( ) button once to
play and once again to pause. Press and hold to close the Bluetooth®
connection.
Answering a call Press the ( ) button once to answer a
call, the music will automatically stop. Press ( ) button again to end the
call. To restart the music press the ( ) button.
Pairing two speakers together Power on both speakers then
press both ( ) ( ) buttons simultaneously on one of the speakers to initiate
pairing. When successfully paired the speakers will “beep”. Previously paired
speakers will automatically pair again when both turned on.
Support
In the event, you need to contact Veho for support or troubleshooting for your MR7 wireless speaker visit our website at veho-world.com and use our pop-up chat box.
Specifications
Total watts
Impedance
Frequency
SNR
Battery capacity
Mains input
Play time
Charge time
Operating range
Connections
Bluetooth® version
Built-in microphone
TWS
File compatibility
Dimensions| 2 x 8W
4K
65Hz-20KHz
75dB
3.7V/1800mAh
DC5V/2A
30 hours
4 hours
Up to 25M
Bluetooth®/Line-in
v5.0
Yes
Supported
IOS/Android/WinXP/Win10
186mm x 54mm x 76mm
---|---
EC DECLARATION OF CONFORMITY
Hereby, Veho UK LTD declares that the radio equipment type (VSS-401-MR7) is in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at https://veho-world.com/compliance/
Frequency band(s) – 2.4-2.48GHZ
Maximum radio-frequency power – +4dB
This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>