CO-Z HBC-S002-BK Professional Barber Chair User Manual
- June 15, 2024
- CO-Z
Table of Contents
CO-Z HBC-S002-BK Professional Barber Chair
Product Information
Specifications
- Material: Stainless Steel, Cast Iron, Chrome, HDF, Artificial Leather, Foam
- Backrest Dimensions: Seat
- Armrest
- Weight Capacity: 440 lb. (200 kg)
- Net Weight: 53 lb. (24 kg)
Product Usage Instructions
Package List
The package should include the following items:
- Barber Chair
- Assembly Tools (M4 hex wrench)
- User Manual
Assembly
- Unpack all the components and ensure that you have all the required parts.
- Attach the footrest to the seat by aligning the holes and securing them with the provided screws.
- Loosen the preinstalled set screws on the pump using the M4 hex wrench. Fit the pedal onto the pump and secure it by retightening the screws.
- Attach the backrest to the seat by aligning the brackets and inserting the screws.
- Insert the top of the hydraulic pump into the central hole underneath the seat.
- Place the chair on a level surface and press down on both armrests until the seat is secure.
Adjustment
To adjust the height of the chair:
- To raise the chair, press the pedal lightly, quickly, and repeatedly until your desired height is reached.
- To lower the chair, hold the pedal while someone is sitting in it or while pushing down on it.
Maintenance
Regular maintenance will help prolong the lifespan of your barber chair. Here
are some maintenance tips:
- Keep the chair clean by wiping it with a damp cloth.
- Avoid using harsh chemicals or abrasive cleaners that may damage the chair’s materials.
- Check for any loose screws or parts and tighten them if necessary.
- Inspect the artificial leather upholstery for any signs of wear or damage and replace if needed.
Frequently Asked Questions (FAQ)
-
Q: What is the weight capacity of the barber chair?
A: The barber chair has a weight capacity of 440 lb. (200 kg). -
Q: How do I adjust the height of the chair?
A: To raise the chair, press the pedal lightly, quickly, and repeatedly until your desired height is reached. To lower the chair, hold the pedal while someone is sitting in it or while pushing down on it. -
Q: How should I clean the chair?
A: You can clean the chair by wiping it with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that may damage the chair’s materials. -
Q: How can I obtain a .pdf copy of the user manual?
A: Use the appropriate app on your smartphone to scan the QR code provided in the user manual to download the latest version of the instructions in .pdf format. -
Q: How can I contact customer support?
A: If you have any questions or comments, you can contact us at help@cs- supportpro.com. We will resolve your issue as soon as possible.
Safety Information
Warning!
- ALWAYS ensure all fasteners and components are intact and securely tightened before each use.
- DO NOT use this chair if it is damaged or malfunctions. Repair or replace worn or broken parts before further use.
- DO NOT load this chair with more than 660 pounds (47 st. 2 lb.) or 300 kg.
- DO NOT leave children or persons with compromised physical or mental capabilities using this chair without close supervision.
- Store this product out of the reach of children after use.
Product Diagram
Package List
- Seat with 2 M5×20 Bolts × 1
- Backrest with 4 M5×25 Bolts × 1
- Footrest × 1
- Hydraulic Pump × 1
- Pedal with 2 M4×8 Screws × 1
- Base × 1
- M5×20 Bolts × 6
- Caps × 8
- M5 Hex Wrench × 1
- M4 Hex Wrench × 1
Specifications
Material| Stainless Steel, Cast Iron, Chrome, HDF, Artificial Leather,
Foam
---|---
Dimensions| Height Range| 32.7–36.6 in.| 83–93 cm
Backrest| 18.9×15.4 in.| 48×39 cm
Seat| 20.5×19.7 in.| 52×50 cm
Seat Elevation| 16.1–20.1 in.| 41–51 cm
Armrest| 20.9×13.4 in.| 53×34 cm
Weight Capacity| 440 lb.| 200 kg
Net Weight| 53 lb.| 24 kg
Assembly
- Place the hydraulic pump onto the base, aligning its bottom holes with those of the base. Secure the pump using the M5×12 bolts and tighten them with the M5 hex wrench.
- Loosen the preinstalled set screws on the pump using the M4 hex wrench. Fit the pedal onto the pump and secure it by retightening the screws.
- Remove the four preinstalled M5×25 bolts from the backrest. Place the backrest between the armrests, aligning its holes with those in the connecting plates of the armrests. Replace the four bolts to secure the backrest. Attach the provided caps to the bolts and press them into place.
- Remove the two preinstalled M5×20 bolts from the footrest. Fit the footrest onto the bottom of the seat and replace the two bolts to secure it. Tighten the bolts with the M5 hex wrench.
- Insert the top of the hydraulic pump into the central hole underneath the seat. Place the chair on a level surface and press down on both armrests until the seat is secure.
Adjustment
To raise the chair, press the pedal lightly, quickly, and repeatedly until your desired height is reached. To lower the chair, hold the pedal while someone is sitting in it or while pushing down on it.
Maintenance
- The exterior of this chair should be cleaned periodically with a soft damp cloth. Do not use abrasive cleaners or caustic chemicals.
- Check the parts for any looseness, wear, or damage periodically. Tighten, repair, or replace any problematic parts before further use.
- If this chair will not be used for a long time, store it in a cool, dry, and safe place.
Contact Us
- Thank you for choosing our products! If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP!
- For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>