BenQ LCD Monitor PD2700U Recycle Disassemble Instruction Manual

Recycle Disassemble Instruction
(Dismantled Information)

Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU on waste electrical and electronic equipment (WEEE)
Materials and components with hazardous content
LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Product Name: LCD Monitor
Model No.: PD2700U

Disassembly Tools

/wp-content/uploads/2021/11/Philips-Screwdriver-300x81.jpg)
Nosed Pliers|
Diagonal Cutting Pliers|
Slotted screwdriver|
Six Point Sockets|
Philips Screwdriver for M2.5 Screw|
Knife|

Disassembly process

Remove external cable(WEEE ANNEX VII)

1. Remove USB cable
2. Remove HDMI cable
3. Remove DP cable
4. Remove Power Cord

Remove ASSY Stand

1. Remove base by pressing release Screw.

2. Remove ASSY CLMN by hand.
   

Remove ASSY Rear Cover

1. Remove screw to release Rear Cover
   

2. Remove Slider module from RC by Screwdriver and hand
   

Remove SHD and PCB.

1. Remove lamp wire and ctrl BD FFC.
   

2. Remove LVDS from PANEL, and remove the screw by screwdriver

3. Remove wire by hand
   

Remove MF and DECO from PANEL

1. Remove screw by screwdriver

2. Remove DECO by hand

3. Remove CTRL BD FFC and CTRL BD by hand
   

4. Remove screw by screwdriver

Disassembly Time
Total time: 30 minutes

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>