Odier CB05 Car Wireless Charger User Manual
- June 17, 2024
- Odier
Table of Contents
Odier CB05 Car Wireless Charger
Specifications
- Model number: CB05-A
- FCC ID: 2A9WR-CB05
- Item: Car Wireless Charger
- Input: DC 9V/2A, DC 5V-2.4A
- Output: 15W/10W/7.5W/5W
- Input port: USB 2.0
- Compatible phones: 4.7-7.0 inch phones
- Installation: Cars air vent
Product Usage Instructions
New Design Car Phone Holder
This instruction is suitable for CB05 phone holders. For more use problems
and skills, please ask the local distributors.
Usage
- The phone mount will open automatically by infrared induction when the mobile phone is close to it.
- The phone mount will clamp automatically after you put the phone on it.
- To take off the phone, simply touch the back of the phone mount, and it will open automatically.
- The phone mount has a supercapacitor, so if it is not connected with USB, the phone mount can still work as usual.
Specifications
Working Marks:
- Phone holder power on: Blue light is on for 2s
- Phone holder standby: Blue light is always on
- Fully charged: Blue light is on for 15s, then off
- Charging state: Blue light flashes slowly
- Foreign object alarming: Blue light flashes quickly
- Over temperature protection: Blue light flashes quickly
- Insufficient voltage: Blue light off
Compatible Models:
5W/7.5W for iPhones, 5W/10W for Samsung series, Huawei mobile phones, and
other devices that support Ql wireless charging Type.
Features:
Over-voltage protection, over current protection, over temperature
protection, short circuit protection, and foreign object detection.
Fast Charging Function:
Fast charging only supports QC2.0/3.0 charger.
- This instruction is suitable for CB05 phone holders.
- For more use problems and skills, please ask the local distributors.
Patent products, quality assurance
New design car phone holder
- Model number: CB05-A
- FCC ID 2A9WR-CB05
- Item: Car Wireless Charger
- Input: DC 9V/2A, DC 5V-2.4A
- Output: 15W/10W/7.5W/5W
- Input port: USB 2.0
- Compatible phones: 4.7-7.0 inch phones Installation: Cars air vent
Usage
- The phone mount will open automatically by infrared induction,when mobile phone close to it
- The phone mount will clamp automaticall after you put on the phone on it
- To take off the phone , just touching the back of the phone mount , it will open automatically
- There is an supercapacitor in the phone mount, so if it is not connected with USB, the phone mount can work as usual
Specifications
- The working marks phone holder power on : Blue light is on for 2s
- Phone holder standby : Bue light is always on Fully charged: Blue light is on for 15s, then off
- charging state: Blue light flashes slowly
- Foreign object alarming : Blue light flashes quickly Over temperature protection: Blue light flashes quickly
- Insufficient voltage : Blue light off
- Compatible models
- 5W/7.5W for iPhones
- 5W/10W (support Samsung series Huawei mobile phones, etc. and other devices that support Ql wireless charging Type)
- Features
- Over voltage protection, over current protection, over temperature protection, short circuit protection, foreign objec detection
- D. Fast charging function
- Fast charging only support QC2.0/3.0 charger
Manual
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which there receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: when the radiator and your body.
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm bet between the radiator and your body.
FAQ
Q: What are the compatible phone sizes for the CB05 phone holder?
A: The CB05 phone holder is compatible with 4.7-7.0 inch phones.
Q: What type of installation does the CB05 phone holder require?
A: The CB05 phone holder is designed to be installed on cars' air vents.
Q: Does the CB05 phone holder have any safety features?
A: Yes, the CB05 phone holder has over-voltage protection, over-current protection, over-temperature protection, short circuit protection, and foreign object detection.
Q: What charging speeds are supported by the CB05 phone holder?
A: The CB05 phone holder supports 15W/10W/7.5W/5W charging speeds.
Q: Can the CB05 phone holder be used without being connected to a USB?
A: Yes, the CB05 phone holder has a supercapacitor, allowing it to work as usual even without a USB connection.