OLIGHT i5T EOS Brass LED Flashlight User Manual
- June 6, 2024
- OLIGHT
Table of Contents
USER MANUAL
(LIMITED EDITION)
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
PACKAGE CONTENTS
SPECIFICATIONS
- All the above specifications are test results based on ANSI/NEMA FL1-2009 Standards.
TEAR HERE TO TAKE OUT THE PRODUCT AND DEOXIDIZER.
INSULATING FILM
Before first use, unscrew the tail cap and remove the insulating film.
BATTERY INSTALLATION
If the battery needs to be changed, make sure that the positive polarity side
of the battery faces toward the direction of the flashlight head (the side of
the LED).
AVAILABLE BATTERIES
• 1 x 1.5V AA alkaline battery (included)
• 1 x AA NiMH battery (compatible)
DANGER
- DO NOT throw the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
- DO NOT cover the light head when the flashlight is on. or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- Please DO NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise, it could lead to the damage of the flashlight or unexpected danger.
WARNING
- Keep out of reach of children.
- It the light is about to be put aside for a long time or be transported, please unscrew the tail cap and remove the battery to cut off the circuit.
NOTICE
- Ensure battery is inserted with the positive (+) end pointing to the head of the flashlight (LED side).
- When the flashlight is turned on, it will go too low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
- It is normal for the flashlight not to be able to reach 300 lumens when the battery voltage is too low (under 1.2V).
When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momentary on. Cycle through momentary low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click) . Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
WARRANTY
Within 30 days of purchase : Return to the original seller for repair or
replacement.
Within 5 years of purchase : Return to Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or Olight itself.
EU-DECLARATION OF CONFORMITY
EU-Declaration of Conformity can be found
here: https://olightworld.com/ec-declaration
USA Customer Support cs@olightstore.com
Global Customer Support customer-service@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Keg Industrial Park, No 6 Zhongnan Road
, Changan Town, Dongguan City, Guangdong, China.
Made in China
A. 12, 29, 2020
3.0413.6010.9008
www.DrMemory.com/Olight
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>