OLIGHT Seeker 4 Mini Flashlight User Manual
- October 30, 2023
- OLIGHT
Table of Contents
OLIGHT Seeker 4 Mini Flashlight
Product Information
The product is a rechargeable compact EDC flashlight that combines white light and UV. It comes with a flashlight, lanyard, USB magnetic charging cable, and rechargeable Li-ion battery. The flashlight has a cool white CCT of 5700~6700K with a CRI of 70 and a neutral white CCT of 4000~5000K with a CRI of 70. It has different modes including Turbo (1200 lumens), High (600 lumens), Medium (120 lumens), Low (15 lumens), Moonlight (2 lumens), and UV (Optical Power(Typ.): 760mW Max Runtime: 95min Wavelength(Typ.): 365nm). The flashlight has a maximum beam distance of 120 meters and a peak beam intensity of 3,600cd. The battery has a capacity of 1100mAh and a voltage of 3.6V (3.96Wh).
Product Usage Instructions
- To turn on the flashlight, press the button once. To turn it off, press the button again. To switch between white light and UV light, double press the button. To access moonlight mode, press and hold the button for more than one second. To access turbo mode, press and hold the button for more than two seconds. To switch between different modes, press the button once to cycle through low, medium, high, and turbo modes. To activate strobe mode, triple press the button.
To recharge the battery, first remove the insulating film from the USB magnetic charging cable. Then connect the USB A-Type end of the cable to a power source with an output of 5V 1A. Connect the magnetic end of the cable to the charging port on the flashlight. The LED indicator on the cable will turn red to indicate that charging has started and will turn green when charging is complete. It takes approximately 2.5 hours to fully charge the battery.
Seeker 4 (Mini)
A rechargeable compact EDC flashlight combining white light and UV.
IN THE BOX
Table 1:
Flashlight
Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.
Table 2:
USB Magnetic charging cable.
- Cable length : 0.5
- Input : USB A-Type 5V 1A
- Output CC&CV: 4.2V±0.05V 1.0A
- Time to fully charge : About 1.5 hours
Multi-language dictionary, see Table 3.
- Refer to Table 1 and Table 2 for product parameters.
- Operating instructions as below：
- Remove the insulating film, see Figure 1.
- Charging, see Figure 2.
- Turn on the white light mode, see Figure 3.
- Turn on the UV light mode, see Figure 4.
- Turn it off, see Figure 5.
- Lockout / unlock, see Figure 6.
- Moonlight (only for white light mode), see Figure 7.
- TURBO (only for white light mode), see Figure 8.
- Change brightness level (only for white light mode), see Figure 9.
- Strobe (only for white light mode), see Figure 10.
- Set timer (only for white light mode), see Figure 11.
- Battery Indicator：
- Normal mode, see Figure 12-1.
- Moonlight mode, see Figure 12-2.
Table 3
Multi-language dictionary
- Moonlight
- Low
- Medium
- High
- Turbo
- Strobe
- Press
- Double press
- Press and hold
- Triple press
- Blink once
- Blink twice
- White Light
- UV Light
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or replacement. Within 5 years of purchase: Contact Olight for repair or replacement.
Battery warranty: Olight offers a one-year warranty for all rechargeable
batteries.
USB magnetic charging cable: One year.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or Olight itself.
USA Customer Support
[email protected]
Global Customer Support:
[email protected]
Visit: www.olightworld.com to see our
complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd.
Address: 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road,
Changan Town, Dongguan City, Guangdong, China.
Made in China