OLIGHT Obulb User Manual
- June 6, 2024
- OLIGHT
Table of Contents
USER MANUAL
Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
IN THE BOX
Obulb
| USB Magnetic Charging Cable| Adhesive Metal Badge
---|---|---
FEATURES
- 4 light modes: warm white light(high/low), red light, and flashing red light, perfect to create a joyful and cozy vibe.
- Both 55-lumen and 3.5-lumen brightness are available for multiple purposes and running up to 56 hours at the low setting.
- The magnetic charging, simple button, and light weight deliver an easy-to-use experience.
- Made of safe and durable materials, the Obulb is IPX7 waterproof and 1.5-meter drop resistant.
SPECIFICATIONS
MODE| |
---|---|---
Warm White Light (high)| 55lumens| 3h
Warm White Light (low)| 3.5lumens| 56h
Red Light| 7lumens| 7h
Flashing Red Light| 7lumens| 30h
| | | 1.94oz
55g Including battery
---|---|---|---
• All data above are test results according to ANSI/NEMA FL 1-2009 standards.
• The tests are performed using the built-in battery that is fully charged.
PRODUCT OVERVIEW
UNLOCK THE LIGHT AT FIRST USE
Note: Before first use, please press and hold the button for over 2 seconds to unlock the product.
CHARGING
• Before the first use please fully charge the product.
• Connect the USB end of the magnetic charging cable (MCC 1A) to an external
USB power source, then attach the other end of the cable to the charging port
at the bottom of the product. It takes 2 hours to fully charge.
• Charged at 5V/max 0.65A.
• The red indicator means charging, while the green indicator means charging
completed.
Note: When the charging cable is connected for the first time, it is normal that the indicator of the cable flashes red once or twice to signal to charge cable detection.
BATTERY TYPE
• Built-in 630mAh 3.7V Rechargeable Lithium Polymer Battery.
HOW TO USE THE ADHESIVE METAL BADGE
1. Clean and dry the paste position.
2. Gently and carefully peel out the protective film and DO NOT touch the
sticky side.
3. Paste the sticky side of the adhesive metal badge onto the desired
position and press it evenly until it is fixed in place.
4. Attach the Obulb on the adhesive metal badge.
NOTICE
- When the light is turned off, the current output mode will be memorized for the next activation.
- The output brightness will decrease as the battery runs low and its voltage decreases until the light goes off.
- DO NOT use any charging cable other than the provided MCC 1A cable.
DANGER
- DO NOT drop the light or impact it heavily to protect the built-in battery.
WARNING
- DO NOT charge the product if it becomes dirty or wet after being used in a wet place. Before charging, please clean and dry it.
- DO NOT let a pet play with it, in case the pet will bite and damage it.
- DO NOT hit it as a ball, which may cause irreversible damage.
- DO NOT use it as a baby toy.
- It may be damaged or distorted at a temperature of 60 ℃ or higher.
HOW TO OPERATE
The button is located at the bottom of the product. It can be operated by
pressing the flat part of the bottom, or by pressing the top of the cover
provided that the product sits securely on a hard surface.
ON/OFF : Single-click the button to turn the light on/off.
CHANGE OUTPUT : When the light is on, press and hold the button to circle
through warm white light (low), warm white light (high), red light, flashing
red light.
WARM WHITE LIGHT (LOW) : When the light is off, press and hold the button
for less than 2 seconds to access warm white light (low) directly.
LOCK/UNLOCK: When the light is off, press and hold the button for over 2
seconds, the light will be locked out after a short flash. Under the lockout
mode, if press the button for less than 2 seconds, the light will be on with
low white light momentarily. To exit the lockout mode, press and hold the
button for over 2 seconds until the light is on with low white light after a
quick blink.
. WARRANTY
Within 30 days of purchase : Contact the original seller for repair or
replacement.
Within 2 years of purchase : Contact Olight for repair or replacement.
USB magnetic charging cable : One year. This warranty does not cover
normal wear and tear, modifications, misuse, disintegrations, negligence,
accidents, improper maintenance, or repair by anyone other than an authorized
retailer or Olight itself.
EU-DECLARATION OF CONFORMITY
https://olightworld.com/ec-declaration
EU-Declaration of Conformity can be found here:
https://olightworld.com/ec-declaration
Dongguan Olight E-Commerce Technology Co., Ltd
. 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan
Town, Dongguan City, Guangdong, China.
3.6002.6010.9000 Made in China
A.11,06,2020
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>