OLIGHT S15 Baton Titanium CREE XM-L2 LED Flashlight Owner’s Manual

June 6, 2024
OLIGHT

OLIGHT S15 Baton Titanium CREE XM-L2 LED Flashlight Owner’s Manual
OLIGHT S15 Baton Titanium CREE XM-L2 LED Flashlight

Thank you for purchasing the Olight S15 Baton Titanium flashlight. Please read this manual carefully before using this product.

Package Contents

  • Flashlight *1
  • Flying ring *1,
  • O-ring*2
  • Silicone pad*1
  • User’ manual.

Operational instruction

Product Overview

Battery Installation: Insert the battery into the f refer to Figure, the battery positive towards light head.

Brightness level:

  1. 1*14500 Lithium battery with moon, low, medium, high 4 brightness and strobe.
  2. 1*AAAlkaline/NIMH battery with noon. love, high 3 brightness and strobe.

There are three ways to start up, under “OFF” status:

  1. To quickly press side switch once to start up and output memorized brightness level.
  2. To hold down side switch for 1 second to activate moonlight mode.
  3. To quickly double press side switch to activate high mode.

Brightness level change

  1. If holding down side switch, the output circularly changed in the order from low to high, while release to confirm the mode.
  2. Quickly double press side switch to activate strobe (cannot be memorized), while normal press to quit and return to memorized mode.

Lock and unlock

Lock operation: with the flashlight off, to hold down side switch for 1 second to activate moonlight mode, and then3. press the side switch for another second without a stcp to turn off output and the flashlight is n lock- out state.
Unlock operation: after locking out, just to hold down side switch for 1 second to unlock anc activate moonlight mode.

Tips: side switch is invalid when the flashlight is in look-out state, unless users are carrying out unlock operation.

Specifications

  • Material: Titanium alloy

  • Dimension
    L 86.0 mm, (Head; D23.0mm, (Tube)D 18.5mm

  • Weight: 63g (Without battery)

  • LED: CREE XM-L2 Neutral White

  • Battery: AAALKALINE / NIMH /14500

  • Rated Voltage: 0,7~5.0 V

  • Reflector: Smooth surface reflector

  • Output and Runtime
    260lumens/1h30min
    80Iumens/7h
    7 lumens/40h
    0.3Iumens/360h
    Strobe: 10HZ

  • Peak Beam intensity: 1,640 cd

  • Beam Distance:  91 meters

  • Waterproof: 1PX 8

  • Impact resistance: 2 meters

Note: Testing with 1 piece of 900mAh 3.7V 14500

Output VS Runtime

Output VS Runtime
Figure 1: Output VS Runtime

Warranty

Olight warrants its products to be free from defects in materials and workmanship. Within 30 days of receipt, any defective lights will be offered repair o’ rep.acement by the retailer where the product was purchased. Olight will repair or replace. at is option and without charge, any product or part which is found to be defective under normal use and service within 5 years counting from the date of purchasing with proof of purchase, Such repair or replacement shall be the purchaser’s sole and exclusive remedy under this warranty, This warranty does not cover normal maintenance and service and does not apply to any products or parts wh ch have been subject to modification, misuse, negligence, accident, improper maintenance or repair by anyone other than Olight. As to those exceed 5 years of the purchase date. Olight will still provide with warranty service. Labor is free but cost of parts will be charged. This warranty covers parts and labor only as specified above, Freight and transit costs are the responsibility of the user/owner, not the factory or dealer.

Support

Olight Technology Co., Limited
Address: 2/F East, Building A, 83 Block, Fuhai Industrial Park. Fuyong, Bao’an District, Shenzhen , China 518103

Tel +86-755-81452608/81452618
Fax: +86755-81452508
E-mail : service@olightworld.com
Web: www.olightworld.com

Icons

Made in China

OLIGHT logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals