Enerdrive EN5092230 ePRO Plus USB Bluetooth Dongle Installation Guide
- June 6, 2024
- Enerdrive
Table of Contents
ePRO Plus USB Bluetooth Dongle
Installation Guide
Package Contents
Mounting the Interface Box
Connecting the Interface Box
RESET BUTTON
The Bluetooth Interface can accept a maximum of 4 different phone or tablet
pairings in its memory. When this number of devices has been exceeded, the
pairing list has to be cleared. This can be done by pressing the reset button
during operation until the status LED turns white. After this, the interface
will reboot and you are able to pair with 4 different mobile devices again. In
some cases, the Bluetooth interface has to be reset completely by shortly
disconnecting the QuickLink cable.
Downloading & Installing the Enerdrive Dashboard App
The Enerdrive Dashboard App can be downloaded from the Apple App Store and Google Play.
Running the Enerdrive Dashboard App
After launching the app the splash screen will be shown shortly, followed by the Device List (see image on right). Android may ask to allow Enerdrive Dashboard to access the device’s location. This is OS Specific and unfortunately can not be omitted. The Enerdrive Dashboard will not broadcast or store any location or user-specific data.
Note: Android Devices
Dashboard mobile has been tested on a wide range of Android devices. However,
due to the immense variety of hardware platforms running Android and the less
than optimal software support by some Android device vendors, Enerdrive cannot
guarantee correct functionality on any existing Android device.
Click on the ‘Add Device’ button at the bottom of the screen to
search for nearby Enerdrive devices. When a device is found, it will be shown
in the ‘Add Device’ screen. Each device has a unique name indicated by ‘XX:
XX’. This name is also printed on the Bluetooth interface box. Click on the
device button to establish a connection. A dialog box will follow, asking to
start the pairing process.
For Android, the screen jumps to the main Bluetooth devices list. From
this list, you need to select the desired Enerdrive device. After selecting
the desired device, Android will ask for a 6 digit passkey. This passkey is
also printed on the Bluetooth box. After entering the passkey, the device has
been paired. Now jump back to the Enerdrive dashboard app and press the
desired device button again and confirm that you would like to add the device.
The Device List will look like the image on the right.
For iOS (Apple ), after a found device is selected in the ‘Add Device’
screen, the app will directly ask for the 6 digit passkey that is printed on
the Bluetooth box. After this code has been entered, the device is paired and
added to the ‘Device List’ screen as shown in the image on the right. Now
press the device button to start communicating with the device. It will
connect automatically and when the left side status bar turns green, the app
automatically jumps to the main screen (see image on the right).
In this example where the Bluetooth box is connected to an ePRO Plus Battery
Monitor, the main screen shows all basic information about the battery. More
information can be recalled by pressing the ‘Show More’ area (see ‘1’). The
setup icon (see ‘2’) can be pressed to enter the ‘Settings’ screen. In this
screen, you can read out the device status and the history data, set up the
device, reset the device, lock or unlock the setup and reset menu, manually
synchronize the ePRO plus with your battery and rename your device.
Using the app is relatively self-explanatory and for most setup parameters
additional explanations are given on each screen. Nevertheless, it is strongly
advised that the installer is aware of the technical aspects of the connected
device. Please consult the owner’s manual of the device for this.
Specifications plus notes
Technical specifications
Communication bus type| QLINK
Current consumption| 5mA max.
Bluetooth version| 4.1 (Low Energy)
Operating ambient temp.| -25 … +70°C
Dimensions (L x W x H)| 74 x 43 x 25mm
Enerdrive makes no warranty as to the accuracy, sufficiency, or suitability of
any technical or other information provided in this manual or other
documentation. Enerdrive assumes no responsibility or liability for losses,
damages, costs, or expenses, whether special, direct, indirect, consequential,
or incidental, which might arise out of the use of such information. The use
of any such information will be entirely at the user’s risk.
Enerdrive makes no warranty, either expressed or implied, including but not
limited to any implied warranties of merchantability or fitness for a
particular purpose, regarding this Enerdrive product and makes this Enerdrive
product available solely on an `as is’ basis.
Enerdrive shall in no event be liable to anyone for special, collateral,
incidental, or consequential damages in connection with or arising out of
purchase or use of this Enerdrive product. The sole and exclusive liability to
Enerdrive, regardless of the form of action, shall not exceed the purchase
price of this Enerdrive product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>