Enerdrive EN3DCREM ePOWER DC2DC Charger Remote Panel Instruction Manual
- June 6, 2024
- Enerdrive
Table of Contents
Enerdrive EN3DCREM ePOWER DC2DC Charger Remote Panel
Installation and Operation Guide
A qualified technician is required to install the Remote Panel to the DC2DC Charger. Take caution when working with batteries. Always disconnect the AC Power before you make any installation.
WARNING Shock, fire and energy hazards.
This Remote Panel is to be used with the power DC2DC series EN3DC30 and EN3DC40+ for single or parallel charger operation.
Mounting the Remote Panel
-
Choose an appropriate mounting location
-
Use the wall cutout template and the Remote Panel mounting template as a reference to mark the positions of the mounting holes.
-
Install the RJ45 Cable in your desired location.
-
Connect one end of the RJ45 cable to ‘Com 1’ of Remote Panel. Please note the polarity.Secure the Remote Panel.
-
Connect the other end of RJ45 cable to the ‘Remote’ port of the 12V DC2DC charger. Please note the polarity. The Remote Panel is now ready to use.
Understanding the Remote Panel function
- The DC2DC Remote Panel share the same controls and display functions as the display on the DC2DC main unit
- Please read “Understanding the Display & Function Keys during normal operation” for detail.
5 Year Warranty
In the unlikely event that a technical issue arises with an Enerdrive product, customers are encouraged to initially contact the Enerdrive Support Team on 1300 851 535 or: support@enerdrive.com.au for immediate and efficient expertise and first class product support.
Important Note: Consumer Protections
If you have purchased your product in Australia, you should be aware that:This
warranty is provided in addition to other rights and remedies held by a
consumer at law. Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. Enerdrive warrants that its Products will be free from defects
in materials and workmanship (subject to limits and in normal conditions, as
described in the complete Enerdrive Warranty Policy) for up to 5 years from
the date of purchase. For full terms, conditions and claim process, refer to
the Enerdrive website. https://enerdrive.com.au/warranty/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>