OLIGHT i5T EOS Titanium Damascus User Manual
- June 6, 2024
- OLIGHT
Table of Contents
USER MANUAL
i5T
EOS Titanium Damascus
(LIMITED EDITION)
Thank you for purchasing this 0light Product
Please read this manual carefully before use and keep it for future reference!
IN THE BOX
SPECIFICATIONS
*All above specifications are test results based on ANSI/NEMA FL1-2009 Standards
INSULATING FILM
Before first use, unscrew the tail cap and remove the insulating film
BATTERY INSTALLATION
If the battery needs to be changed, make sure that the positive polarity side of the battery faces toward the direction of the flashlight head ( the side of the LED)
AVAILABLE BATTERIES
- 1×1.5V AA alkaline battery ( included)
- 1×AA NiMH battery ( compatible)
DANGER
- DO NOT throw the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes
- DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials
- Please DO NT use batteries other than the ones mentioned in the available batteries”, especially rechargeable lithium batteries, otherwise, it could lead to the damage of the flashlight or unexpected danger
WARNING
- Keep out of reach of children
- If the light is about to be put aside for a long time or be transported, please unscrew the tail cap and remove the battery to cut off the circuit
NOTICE
- Ensure battery is inserted with the positive (+) end pointing to the head of the flashlight (LED side)
- When the flashlight is turned on, it will go too low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again
- It is normal for the flashlight not to be able to reach 300 lumens when the battery voltage is too low ( under L2¥)
EXCLUSION CLAUSE
0light is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, inc loading but not limited to ting the product inconsistent with the recommended lockout mode
When the light is first turned on, it will go too low as the default mode.
Soft press without fully clicking for momentary on. Cycle through momentary
low and high mode by quickly soft pressing, letting go, and soft pressing
again. Deep press for constant on (you will hear a click). Continue to click
on and off within 2 seconds after it was turned off to shift between low and
high brightness levels. If it is turned on over Z seconds after it was
switched off, it will go directly to low mode as default again
EU-DECLARATION OF CONFORMITY
EU-Declaration of Conformity can be found here https://olightworld.com/ec-
declaration
https://olightworld.com/ec-declaration
WARRANTY
Within 30 days of purchase: Return to the original seller for repair or
replacement
Within 5 years of purchase: Return to 0light for repair or replacement
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an Authorized retailer or 0light itself
USA Customer Support
cs@olightstore.com
Global Customer Support
customer-service@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Doogan Oigt E-Commerce Technologr Co., Ltd
4th floor, guiling.4. Meg Industrial Park, No 6
Zhongnan Road,
‘Changan Tow, Dongguan City,
Guangdong. China
Made in China
A 08. 25. 21021
3.0413.6010.9010
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>