OLIGHT i3T EOS 180 Lumens Dual-Output Slim EDC Flashlight User Manual
- June 6, 2024
- OLIGHT
Table of Contents
OLIGHT i3T EOS 180 Lumens Dual-Output Slim EDC Flashlight User Manual
PACKAGE CONTENTS
i3T EOS, 1 *AAA Alkaline battery (installed inside the flashlight), User Manual
SPECIFICATIONS
Material, AL6061-T6 aluminium alloy unibody design with Mil Spec Type- III hard anodizing.
*All above specifications are test results based on ANSI/NEMA Fll-2009 Standards.
INSULATING FILM
Before first use, unscrew the tailcup and remove the insulating film
BATTERY INSTALLATION
If the battery needs to be changed, make sure that the positive polarity side of the battery faces toward the direction of the flashlight head (the side of the LED)
AVAILABLE BATTERIES
- 1 x 1.SV AAA alkaline battery(included)
- 1 x AAA lithium battery
- 1 x AAA NiMH battery
When the light is first turned on, it will go to low as the default mode. Soft
press without fully clicking for momentary on. Cycle through momentary low and
high mode by quickly soft pressing, letting go, and soft pressing again. Deep
press for constant on (you will hear a click). Continue to click on and off
within 2 seconds after
it was turned off to shift between low and high brightness levels. lf it is
turned on over 2 seconds after it was switched off, it will go directly to low
mode as default again.
DANGER
- Do NOT throw the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
- Do NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- Please do NOT cover a flashlight that is on. The generated heat can cause burning or even unpredictable disasters.
- Please do NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise it could lead to the damage of the flashlight, or unexpected danger.
WARNING
- Keep out of reach of children.
- When the flashlight is working on the high mode, the surface temperature can reach 50°C. Please switch off the flashlight temporarily or turn it to low mode.
- If the light is about to be put aside for a long time or be transported, please unscrew the tail cap for half a circle to cut off the circuit.
NOTICE
- Ensure battery is inserted with the positive (+)end pointing to the head of the flashlight (LED side).
- When the flashlight is turned on, it will go to low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
- It is normal for the flashlight not being able to reach 180 lumens when the battery voltage is too low (under 1.0V).
- It is normal for the flashlight to blink when the battery is running out.
WARRANTY
Within 30 days of purchase: Return to the original seller for repair or replacement.
Within 5 years of purchase: Return to Oight for repair or replacement.
Battery Warranty: Oight offers a one year warranty for all rechargeable batteries.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Light itself.
EU-DECLARATION OF CONFORMITYhttps://olightworld.com/ec-declaration
EU-Declaration of Conformity can be found here CE:
USA Customer Support
cs@olightstore.com
Global Customer Support
Customer-service@oIightworld.com
Visit www.olightworld.com to see our complete
product line of
portable illumination tools.
https://www.olightworld.com/olight-i3t-eos
References
- Olight | Illuminate Your World.
- Flashlights, Tactical Light, Outdoor Tools - Olight Official Store- Olight
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>