C2G54535 USB-C Triple Display Docking Station User Manual
- June 6, 2024
- C2G
Table of Contents
C2G54535 USB-C Triple Display Docking Station
PRODUCT OVERVIEW
FRONT PANEL
FRONT PANEL | DESCRIPTION | |
---|---|---|
1 | Power Button | Switch power on / off |
2 | Power Indicator | LED will light blue when power is on |
3 | USB Connection Indicator | LED will light green when USB is connected |
4 | USB-C Port | Connect a USB-C device |
5 | USB 3.0 Type-A Port | Connect a USB 3.0 device and this port supports |
enhanced
mobile device charging
6| Headphone Jack| Connect to a speaker or headphones
7| Microphone Jack| Connect to a microphone
REAR PANEL
REAR PANEL | DESCRIPTION |
---|
8
|
Power Jack
|
Connect the power adapter
9
|
USB-C Port
|
Connect to the USB-C port of a computer
10
|
Gigabit Ethernet Port
|
Connect to a local network for network and Internet access
11
|
HDMI Port
|
Connect to an HDMI monitor
12
|
DisplayPort Port x2
HDMI Port x2
|
Connect to DisplayPort or HDMI monitors
13
|
USB 3.0 Type-A Port x4
|
Connect to USB 3.0 devices
FEATURES
• Triple 4K display extension
• 1 x USB-C upstream port
• 4 x USB 3.0 Type-A downstream ports
• 1 x USB 3.0 Type-A downstream port with enhanced mobile device charging
• 1 x USB-C downstream port
• Supports audio 2.1 channel
• Gigabit Ethernet port
• Supports DisplayPort resolutions up to 4096 x 2160 @ 60Hz
• Supports HDMI resolutions up to 3840 x 2160 @ 30Hz
• Supports power delivery up to 85W
• Supports Windows® 10 and Mac OS®
PACKAGE CONTENTS
• 1 x USB-C Triple Display Docking Station
• 1 x USB-C Cable
• 1 x 20V 6.75A Power Adapter
• 1 x Manual
WINDOWS 10 DISPLAYLINK DRIVER INSTALLATION
http://www.displaylink.com/downloads/
DisplayLink software can be installed from Windows Update. Alternatively, the
software can be downloaded and installed from the DisplayLink website
following the steps below.
1. Double click on the DisplayLink executable, eg DisplayLink_RX.X.exe.
2. Click Yes. DisplayLink Core Software installs.
3. The System Compatibility Check then runs.
4. You are then informed when installation of DisplayLink software has
completed.
5. Connect the Docking Station to computer after the driver installation is
completed.
MAC OS DISPLAYLINK DRIVER INSTALLATION
http://www.displaylink.com/downloads/
DisplayLink software can be downloaded and installed from the DisplayLink
website following the steps below.
1. Select the ‘DisplayLink Software Installer’ to begin installation of the
DisplayLink driver on your Mac.
2. This will run a standard Mac installer and will require a reboot once it
has completed.
3. Connect the Docking Station to computer after the driver installation is
completed.
IMPORTANT SAFETY INFORMATION
Do not plug the unit in any outlet that does not have enough current to allow
the device to function. Refer to the specifications in this manual for power
level of the unit.
Liquid: If this unit or it’s corresponding power adapter has had liquid
spilled on or in it, do not attempt to use the unit. Do not attempt to use
this product in an outdoor environment as elements such as rain, snow, hail,
etc. can damage the product.
In case of a storm, it is recommended that you unplug this device from the
outlet.
Avoid placing this product next to objects that produce heat such as portable
heaters, space heaters, or heating ducts.
THERE ARE NO USER-SERVICEABLE PARTS. Do not attempt to open this product and
expose the internal circuitry. If you feel that the product is defective,
unplug the unit and refer to the warranty information section of this manual.
C2G WARRANTY
At C2G we want you to be totally confident in your purchase. That is why we
offer a warranty on this device. If you experience problems due to workmanship
or material defects for the duration of this warranty, we will repair or
replace this device.
To request a Return Merchandise Authorization (RMA) number, contact customer
service at 800-293-4970 or
www.c2g.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>