C2G 41057 2-Port HDMI Splitter User Guide
- June 12, 2024
- C2G
Table of Contents
C2G 41057 2-Port HDMI Splitter
PACKAGE CONTENTS
- 2-Port HDMI® Splitter 4K30
- 5V Power Adapter
- Quick Start Guide
DEVICE INSTALLATION
Note:
- Prior to installation ensure that all devices are powered off.
- Step 1: Connect the HDMI source device to the HDMI input on the splitter.
- Step 2: Connect HDMI displays to the HDMI outputs on the splitter.
- Step 3: Connect the 5V power adapter to the power input on the HDMI splitter.
Note: LED lights confirm when the connection is made.
C2G WARRANTY
At C2G we want you to be totally confident in your purchase. That is why we offer a warranty on this device. If you experience problems due to workmanship or material defects for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 800-506-9607 or www.c2g.com.
FCC Statement
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement – §15.105(b):
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution – §15.21:
“Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
© 2018 Legrand All Rights Reserved rev.06/18 QSG – 41057 (US) 82057 (EMEA)
6500 Poe Avenue Dayton, OH 45414
N. America Phone 800.293.4970 EMEA Phone +44 (0)1952 677300 www.c2g.com
FEATURES
-
Support for HDMI Version 2.0:
The HDMI splitter adheres to the HDMI 2.0 standard, which enables it to process high-definition video resolutions of up to 4K (Ultra HD) at 60 Hz in addition to 3D video. -
Output from Two Ports:
Because this piece of equipment contains two HDMI output ports, it is possible to connect two HDMI monitors or TVs to a single HDMI source at the same time. -
Plug-and-Play:
The C2G 41057 HDMI splitter is normally meant to be a device that can be plugged in and used with little to no additional configuration. You shouldn’t need to install any additional drivers or software in order to get it operating after connecting the HDMI source and the two screens; all you should have to do is connect them. -
Amplification of the Signal:
It’s possible that the splitter has signal amplification capabilities, which would allow it to maintain a steady and consistent signal transmission even over extended cable distances. When the signal is being split to many monitors, this is a very critical consideration. -
Support for the HDCP standard:
It is required to include High-bandwidth Digital Content Protection, or HDCP, in order to guarantee compatibility with content that is encrypted, such as Blu-ray discs and certain streaming services. It is likely that the HDMI splitter supports HDCP in order to allow such video to be displayed on your TVs. -
Help with the Audio:
The HDMI splitter has should be capable of supporting a variety of audio formats, such as high-definition audio formats like Dolby TrueHD and DTS-HD Master Audio, in addition to multi-channel audio formats. -
Conveniently Sized:
The gadget is often designed to be small in size and light in weight, making it simple to position and transport from one location to another. -
Indicators with LEDs:
It’s possible that the splitter has LED indications that reflect the status of the HDMI inputs and outputs that are linked to it, which can be helpful while troubleshooting. -
Compatibility:
There is a good chance that the C2G 41057 HDMI splitter is compatible with a broad variety of HDMI devices, including Blu-ray players, gaming consoles, set-top boxes, PCs, and possibly even more. -
Housing that is Robust:
It is possible that the splitter has a strong and long-lasting housing that was designed to protect the inside components.
PRODUCT USAGE
An HDMI signal can be divided from a single source (such as a Blu-ray player, gaming console, or computer) and sent to two HDMI displays (such as TVs or monitors) using a device called the C2G 41057 2-Port HDMI Splitter.
This device has two ports that can split the signal. The following is a list of some of the more typical applications for the C2G 41057 HDMI Splitter:
-
Dual Display Configuration:
With the help of the HDMI splitter, you’ll be able to connect a single HDMI source, like a laptop, to two other monitors. This can be helpful for giving presentations, participating in video conferences, or expanding your desktop so that you can multitask. -
A Home Theater System:
If your cable or satellite box, media player, or gaming console only has one HDMI output, you may use a splitter to deliver the same content to both of your televisions at the same time. This will enable you to watch the same movie or play the same game in more than one room at the same time. -
Exhibits Open to the Public:
It is possible to use an HDMI splitter to transport content from a media player or computer to several screens in a commercial setting such as a store, restaurant, or office. This content could be used for advertising, information display, or digital signage. -
Competitions in Video Games:
Using an HDMI splitter enables you to connect one game console to numerous monitors, which in turn enables multiple players to compete against each other at the same time while you are holding gaming tournaments or LAN parties. -
Rooms for Conferences:
In business settings, an HDMI splitter can be used to link a presenter’s laptop or another HDMI-enabled device to numerous projectors or screens. This ensures that everyone in the conference room is able to view the presentation being given. -
Education:
Students will benefit from increased opportunities for visual learning if their classrooms are equipped with HDMI splitters, which allow content to be displayed on numerous monitors or projectors from a single computer or tablet belonging to the instructor. -
Conventions, Fairs, and Exhibitions:
Within a single booth or over an entire exhibition space, several screens can be utilized in conjunction with the splitter to display promotional videos or product demos. -
Entertainment System for the Home:
If your cable or satellite box or streaming device only has a single HDMI output, you can use the splitter to connect numerous TVs so that you can watch the same content in each area in your home. -
Recording and playing back might happen at the same time:
A video production setup can benefit from the utilization of an HDMI splitter by distributing the HDMI signal to both the recording equipment and the displays. This ensures that whatever is being filmed can also be viewed in real-time. -
Evaluation and Analysis of Problems:
It is possible to test and troubleshoot HDMI displays or projectors using the splitter, which can assist with determining if the problem lies with the display or the source device.
CONNECTIONS
The C2G 41057 2-Port HDMI Splitter is a piece of hardware that enables you to connect a single HDMI source to a pair of HDMI screens at the same time.
The following is a list of the typical connections that can be made with the C2G 41057 HDMI Splitter:
-
Input through HDMI:
Connecting the source device that you want to divide the signal from to the HDMI input port is how you get the signal split. This might be a computer, a Blu-ray player, a gaming console, a cable or satellite box, a media player, or any other device that is enabled with HDMI. -
The first HDMI output is:
This is the first port that can output via HDMI. You will need to connect one end of an HDMI cable from this port to the first HDMI display (TV, monitor, or projector) where you wish to see the content that was generated by the source device. -
HDMI Version 2 Output:
This is the second port that can output through HDMI. The other end of an additional HDMI cable is then connected from this port to the second HDMI display (TV, monitor, or projector) on which the content from the source device is to be mirrored.
The following is an in-depth walkthrough of the connections:
-
Connection Made to the Source Device:
Connect one end of an HDMI cable to the HDMI output port of your source device (for example, a Blu-ray player), and then connect the other end of the HDMI cable to the HDMI input port of the C2G 41057 HDMI Splitter. -
Presenting the Connections:
Connect one end of an HDMI cable to the HDMI output 1 port of the HDMI Splitter, and then connect the other end of the HDMI wire to the HDMI input of your first display (for example, a TV or monitor). In a similar fashion, connect an additional HDMI cable from the Splitter’s HDMI output 2 port to the HDMI input of your second display. -
A Source of Power:
It is possible that the C2G 41057 HDMI Splitter cannot function without the addition of an additional power supply. Connect the power adapter that came with the Splitter to the device’s power input, and then plug the adapter itself into a power outlet. -
Switch to On:
Both the HDMI source device (such as a Blu-ray player, for example) and the displays (TVs or monitors) need to be turned on.
FREQUENTLY ASKED QUESTIONS
What is the C2G 41057 2-Port HDMI Splitter?
The C2G 41057 2-Port HDMI Splitter is a device that allows you to split one HDMI signal from a source device to two HDMI displays simultaneously.
What is the maximum video resolution supported by the C2G 41057 HDMI Splitter?
The C2G 41057 HDMI Splitter typically supports high-definition video resolutions up to 4K at 60Hz.
Does the C2G 41057 HDMI Splitter support 3D video?
Yes, the C2G 41057 HDMI Splitter is usually capable of supporting 3D video content.
Can the C2G 41057 HDMI Splitter handle audio formats like Dolby TrueHD and DTS-HD Master Audio?
Yes, the C2G 41057 HDMI Splitter typically supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio.
What type of HDMI version does the C2G 41057 HDMI Splitter use?
The C2G 41057 HDMI Splitter is usually designed to support HDMI 2.0.
How many HDMI output ports does the C2G 41057 HDMI Splitter have?
The C2G 41057 HDMI Splitter has two HDMI output ports.
Can I connect multiple source devices to the C2G 41057 HDMI Splitter?
No, the C2G 41057 HDMI Splitter is designed to connect one HDMI source device to two HDMI displays.
What is the purpose of using the C2G 41057 HDMI Splitter?
The C2G 41057 HDMI Splitter allows you to display the same content from one HDMI source device on two separate HDMI displays simultaneously.
Is the C2G 41057 HDMI Splitter compatible with all HDMI devices?
The C2G 41057 HDMI Splitter is generally compatible with most HDMI-enabled devices, including Blu-ray players, gaming consoles, computers, and more.
Does the C2G 41057 HDMI Splitter require external power?
Yes, the C2G 41057 HDMI Splitter typically requires external power, which is supplied through a power adapter.
Can I use the C2G 41057 HDMI Splitter for presentations in a conference room?
Yes, the C2G 41057 HDMI Splitter can be used in conference rooms to display the same content from a presenter's device on multiple screens.
What happens if I connect more than two displays to the C2G 41057 HDMI Splitter?
The C2G 41057 HDMI Splitter is designed to work with two displays only. Connecting more than two displays may result in degraded performance or signal issues.
Is the C2G 41057 HDMI Splitter suitable for gaming setups?
Yes, the C2G 41057 HDMI Splitter can be used in gaming setups to connect one gaming console to two monitors for multiplayer gaming.
Can I use the C2G 41057 HDMI Splitter to watch different content on each display?
No, the C2G 41057 HDMI Splitter duplicates the content from the source device, so both connected displays will show the same content simultaneously.
What is the maximum cable length supported by the C2G 41057 HDMI Splitter?
The maximum cable length supported by the C2G 41057 HDMI Splitter may vary depending on the quality of the HDMI cables used, but it is generally recommended to use high-quality cables for longer distances.