C2G80925 USB-C 12-In-1 Triple Display Docking Station Instruction Manual

June 6, 2024
C2G

C2G80925 USB-C 12-In-1 Triple Display Docking Station

C2G80925-USB-C-12-In-1-Triple-Display-Docking-
Station-3 Product Overview

Front Panel


Rear Panel

| FRONT PANEL| DESCRIPTION
---|---|---
1| Power Button| Switch power on / off
2| Power Indicator| LED will light blue when power is on

3

| USB Connection Indicator|

LED will light green when USB is connected

4| USB-C Port| Connect a USB-C device

5

|

USB 3.0 Type-A Port

|

Connect a USB 3.0 device and this port supports enhanced mobile device charging

6| Headphone Jack| Connect to a speaker or headphones
7| Microphone Jack| Connect to a microphone
| REAR PANEL| DESCRIPTION
---|---|---

8

|

Power Jack

|

Connect the power adapter

9

|

USB-C Port

|

Connect to the USB-C port of a computer

10| Gigabit Ethernet Port| Connect to a local network for network and Internet access

11

|

HDMI Port

|

Connect to an HDMI monitor

12

|

DisplayPort Port x2 HDMI Port x2

|

Connect to DisplayPort or HDMI monitors

13

|

USB 3.0 Type-A Port x4

|

Connect to USB 3.0 devices

Features

  •  Triple 4K display extension
  •  1 x USB-C upstream port
  • 4 x USB 3.0 Type-A downstream ports
  • 1 x USB 3.0 Type-A downstream port with enhanced mobile device charging
  • 1 x USB-C downstream port
  •  Supports audio 2.1 channel
  • Gigabit Ethernet port
  • Supports DisplayPort resolutions up to 4096 x 2160 @ 60Hz
  •  Supports HDMI resolutions up to 3840 x 2160 @ 30Hz
  • Supports power delivery up to 85W
  • Supports Windows® 10 and Mac OS®

Package Contents

  • 1 x USB-C Triple Display Docking Station
  • 1 x USB-C Cable
  • 1 x 20V 6.75A Power Adapter
  • 1 x Manual

Windows 10 DisplayLink Driver Installation

http://www.displaylink.com/downloads/
DisplayLink software can be installed from Windows Update. Alternatively, the software can be downloaded and installed from the DisplayLink website following the steps below.

  1. Double click on the DisplayLink executable, eg DisplayLink_RX.X.exe.
  2. Click Yes. DisplayLink Core Software installs.
  3. The System Compatibility Check then runs.
  4.  You are then informed when installation of DisplayLink software has completed.

Connect the Docking Station to computer after the driver installation is completed.

Mac OS DisplayLink Driver Installation

http://www.displaylink.com/downloads/
DisplayLink software can be downloaded and installed from the DisplayLink website following the steps below.

  1. Select the ‘DisplayLink Software Installer’ to begin installation of the DisplayLink driver on your Mac.
  2. This will run a standard Mac installer and will require a reboot once it has completed.
  3. Connect the Docking Station to computer after the driver installation is completed.

Important Safety Information

Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit.
Liquid: If this unit or it’s corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product. In case of a storm, it is recommended that you unplug this device from the outlet. Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.
THERE ARE NO USER-SERVICEABLE PARTS. Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the unit and refer to the warranty information section of this manual.

C2G Warranty

At C2G we want you to be totally confident in your purchase. That is why we offer a warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 800-293-4970 or www.c2g.com.

FCC Statement

Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement – §15.105(b):
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution – §15.21:
“Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”

c2g.com/uk | legrandav.com
EMEA P +31 495 580 840 E c2g.emea@av.legrand.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals