AUSTRALIAN MONITOR IMGC450 Gooseneck Microphone User Guide

June 6, 2024
Australian Monitor

AUSTRALIAN MONITOR IMGC450 Gooseneck Microphone

IMGC450-Gooseneck-Microphone

BOX CONTAINS

  • 1 x IMGC450 Gooseneck Microphone
  • 1 x Isolated shock mount
  • 3 x Self tapping screws for shock mount installation
  • 1 x Windsock
  • Instruction manual

IMPORTANT SAFETY INFORMATION

  1. 1. READ these instructions.

  2. Keep these instructions.

  3. Heed all warnings.

  4. Follow all instructions.

  5. Do not use this apparatus near water.

  6. Clean only with dry cloth.

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
    A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  11. Only use attachments/accessories specified by the manufacturer.

  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

  13. Unplug this apparatus during lightning storms or when unused for long periods of time.

  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

  15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus.

  16. Plug this apparatus to the proper wall outlet and make the plug to be disconnected readily operable.

  17. Mains plug is used as disconnected device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.

  18. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

  19. An appliance with a protective earth terminal should be connected to a mains outlet with a protective earth connection.

  20. The apparatus should be disconnected from the mains completely before speaker wiring. The speaker output should be proper protected from direct contact and pay attention to speaker connections, terminals and speaker wiring during normal operation

INTRODUCTION

IMGC450
Thank you for purchasing this quality Australian Monitor product.
The IMGC450 is the finest gooseneck microphone Australian Monitor has released. This premium electret condenser microphone is tailored specifically for voice reproduction, providing a neutral tone and transparent response. The cardioid polar pattern of the IMGC450 provides exceptional gain before feedback. Users will enjoy fuss-free setup with minimal EQ manipulation, ensuring maximum SPL for that all-important presentation.
This premium microphone is highly recommended for conference rooms, board rooms, meeting rooms, houses of worship, school halls and many other presentation applications.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT & FULLY INSERT.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

|

Caution-Icon.png
WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

|

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

|

Disposal-icon.png
For European Union countries: This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Please contact your local authority for further details of your nearest designated collection point.

---|---|---|---

Rating plate and caution marking are marked on the back enclosure of the apparatus

INSTALLING SHOCK MOUNT & IMGC450 MICROPHONE

The shock mount is designed to be flush-mounted and provides isolation to reduce room-rumble and mechanical noises from being amplified.

Installing the Shock Mount

Installing-the-Shock-Mount

  1. Choose a suitable flat surface to install the shock mount.
  2. Using a hole saw cut a 51mm (2inch) diameter hole through the mounting surface
  3. Slide the shock mount into the freshly cut hole and mark the location of the three screw holes using a marker or punch.
  4. Using a 3.0mm drill pre-drill three pilot holes. 5 Insert the shock mount into the hole again and fasten down the shock mount with the 3 screws provided.
Installing IMGC450 into the Shock Mount

Installing-IMGC450-into-the-Shock-Mount

  1. To install the IMGC450 into the Shock Mount unscrew the bottom plastic screw collar.
  2. Slide the IMGC450 body into the Shock Mount.
  3. Re-install the bottom plastic screw collar until snug.
  4. Be careful not to cross thread or crack the plastic screw collar.
  5. Insert a female 3-pin XLR connector into the microphone base.
  6. Phantom power is required for the IMGC450 to operate.
  7. To avoid possible loudspeaker damage ensure the PA system is muted first before you enable phantom power.

DIMENSIONS

AUSTRALIAN-MONITOR-IMGC450-Gooseneck-Microphone-
Dimensions

POLAR PATTERNS AND FREQUENCY RESPONSE

Polar-Patterns-And-Frequency-Response
Polar-Patterns-And-Frequency-Response

SPECIFICATIONS

MODEL IMGC450
TRANSDUCER TYPE Electret condenser Ø 11.5mm
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 40Hz – 20Khz
LF FILTER 150Hz, 6 dB/Oct
SENSITIVITY 7.0 mV/Pa -42 dB
ELECTRICAL IMPEDANCE 200 Ω
MIN. LOAD IMPEDANCE 1000 Ω
S/N RATIO 72dB A-weighted
MAX. SPL 135dB @ 1% THD
PHANTOM POWER V 9 – 52 V DC
CURRENT DRAW 1.9 mA
FINISH Matte Black
CONNECTION Balanced 3 pin XLR Male Pin 2 +, Pin 3 –, Pin 1 shield
OPERATING TEMP -10°C – 50°C 95% humidity max
DIMENSIONS 450 mm Length
NET WEIGHT 151g
INCLUDED ACCESSORIES Isolation shock mount, windsock

ENGINEERED BY AUSTRALIAN MONITOR
Address: Unit 1, 2 Daydream Street, Warriewood NSW 2102 Australia
Website: www.australianmonitor.com.au International enquiries
Email: international@australianmonitor.com.au
ABN 86 003 231 187

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Australian Monitor User Manuals

Related Manuals