AUSTRALIAN MONITOR PICO-RMK Picoblu 30W Mixer Amplifier Installation Guide
- June 6, 2024
- Australian Monitor
Table of Contents
AUSTRALIAN MONITOR PICO-RMK Picoblu 30W Mixer Amplifier
product overview
INSTRUCTIONS
- In this example we show the PICOBLU being used in 4 applications that are ideal solutions for retail, bar, café installations etc.
- Background music is provided by a Bluetooth source. This can also be connected via the 3.5mm jack input on the front panel.
- Paging and announcements can be made with an AMX526 desktop microphone connected to input 1.
- The FLEX series of box speakers are an ideal match for the PICOBLU with the 5 inch 2-way FLEX30B being shown.
- One pair of these can be set to 8 ohm and connected in parallel (providing a 4 ohm load) or up to 6 when set to 100 volt line and tapped at 3.75 watts giving a total of 22.5 watts
- Different combinations of FLEX speakers at different power tapping’s, (including the FLEX15B or W and the FLEX50B or W) can be connected. The only important thing to watch is the total power: e.g. number of speakers x power tapping.
- The same applies with ceiling speakers, shown here are the QF20CS premium 4 inch 2-way ceiling speakers and the QFC6CS coaxial ceiling speakers.
- The QF20CS has a low impedance setting which is 16 ohms. This makes it nice and easy to come back to 4 ohms when 4 speakers are wired in parallel.
- The QFC6CS coaxial speakers are 100 volt line and therefore need to be tapped down so the total power is less than 30 watts. In the example we have shown 6 speakers tapped at 3.75 watts giving a total of 22.5 watts
- Extra features on the PICOBLU mixer amplifiers are,
- Line output for connection to an additional power amplifier such ESP or HSP series
- Contact closure that gives priority to the mic 1 input
- 2 other line level inputs for additional background sources
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>