BLAUPUNKT HCC701 Hair clipper Owner’s Manual

: June 6, 2024
: Blaupunkt

Table of Contents

IMPORTANT NOTES
TECHNICAL SPECIFICATIONS OF THE POWER SUPPLY UNIT
TECHNICAL SPECIFICATIONS OF THE APPLIANCE
CHARGING THE DEVICE
USING THE HAIR CLIPPER
CLEANING THE HAIR CLIPPER
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLAUPUNKT HCC701 Hair clipper

IMPORTANT NOTES

Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
This device is for domestic use only. Do not use for any other purposes.
The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
Never use the product close to combustibles.
Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
The AC adapter should be connected to an outlet with characteristics consistent with the values on the rating label.
If the cord or power plug or adaptor is damaged or the plug has a loose electrical outlet, do not charge the device and do not power it from the mains. Unplug the AC adapter from the electrical outlet when not in use.
Do not connect or disconnect the adaptor from the power source with wet hands.
This device uses only the power adapter supplied with the device or recommended by the manufacturer.
Do not use the appliance if the blades or any element of the trimming head is damaged.
The appliance may be charged in temperatures in the range of 5-35 degrees Celsius.

Device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC)
Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL SPECIFICATIONS OF THE POWER SUPPLY UNIT

Yuyao City Hongxiang Electrical Appliance Factory Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA HX-S6LV0501000
Input voltage: 100-240V~50/60Hz
Maximum input current: 0,2A
Output voltage: 5V
Maximum output current: 1000mA
Average active efficiency: 73.62%
No-load power consumption: 0,1W

TECHNICAL SPECIFICATIONS OF THE APPLIANCE

Voltage: 5V
Max. input current: 1000mA

Cutting head
Power switch
Display
a) Remaining operating time
b) Rotational speed
c) Motor load indicator
d) Blade lubrication reminder icon
e) Charge icon
Comb caps (3-18 mm)
Charging socket
Charging station
Power cord with charger
Cleaning brush
General-purpose lubricating oil

CHARGING THE DEVICE

If the device has a low battery or has been completely discharged, it is necessary to connect the device to the charger. To do this, insert the charger plug into the device, then connect the charger to the mains. The device will display a charge icon. When the device is fully discharged, there may be a delay in displaying the charge icon. The interval should not be longer than 1 minute. After connecting the device to the charger, you can continue cutting; however, do not use the device near bathtubs, showers, swimming pools and similar wet areas.

USING THE HAIR CLIPPER

Choose the appropriate comb cap (the hair length mark after the cut is visible on the side of the comb cap). Install the comb cap on the hair clipper. Move the precise cutting length adjustment slider to the desired length of 1-1.9 mm. Turn on the hair clipper with the power switch. Each subsequent press of the button will change the rotational speed of the hair clipper motor in the range of 5000-7000 rpm. Slowly move the device over your hair. It is recommended to direct it “against the grain”, in the direction opposite to hair growth. Note: Take care to remove excess cut hair from the comb cap. After cutting, remove all hair from the cutting head. The hair clipper is equipped with a display. It displays the remaining operating time to the next charge, the motor rotational speed, the motor load indicator bar (0 to 2.5 A), the blade lubrication reminder icon and the charge indicator.

CLEANING THE HAIR CLIPPER

Before use make sure that the device is turned off and disconnected from the charger. Clean the comb caps under running water. Sweep the blades with a brush. Remove the cutting head by gently pressing on the blades as shown in the figure. The cutting head can be cleaned under running water. Use a brush to remove dirt from the inside of the device. It is recommended to apply a little general-purpose lubricating oil to the cleaned blades.

Manufacturer
Blaupunkt Competence Center 2N-Everpol Sp. z o.o. ul. Putawska 403A 02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@everpol.pl

In case of questions or problems please contact our service.
Tel. 00 48 22 331 99 54
E-mail: sda@blaupunkt.pl