munchkin 17584 Clear Seat High Chair User Guide

June 6, 2024
munchkin

Owner’s Guide

360° Cloud™

Clear seat high chair with 360° swivel

KEEP FOR FUTURE REFERENCE
Please read the instructions carefully before using this product. Adult Assembly Required.

CCD-0306-000 REV 1

Important Safeguards

IMPORTANT SAFEGUARDS

WARNING: FALL HAZARD

Children have suffered severe head injuries including skull fractures when falling from high chairs. Falls can happen suddenly if the child is not restrained properly.

  • The child should be secured in the high chair at all times by the 5-point harness. Always use restraints and adjust to fit snugly.
  • It is recommended that the high chair be used by children capable of sitting upright unassisted.
  • DO NOT leave the child unattended during use. Always keep the child in view.
  • Do not place the high chair near a counter or table. Your child may be able to push hard enough against these surfaces to tip the chair over.
  • The tray is not designed to hold the child in the chair.
  • Never use or modify the high chair to use the food tray without the crotch post in place.
  • This product is not intended for sleeping.
  • Do NOT move or lift this product with the child inside it.
  • Never use the high chair on the uneven or reclined ground floor.
  • ONLY USE PRODUCT AS INSTRUCTED.
  • Check this product for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly and frequently during use. Do not use a high chair unless all components are correctly fitted and adjusted. DO NOT use a high chair if any parts are missing.

WARNING: Do not use the high chair unless all components are correctly fitted and adjusted.

AGE REQUIREMENTS
This high chair is suitable for children 6-36 months.

WEIGHT REQUIREMENTS
This high chair is suitable for children under 33 lbs/15 kg.

SWIVEL POSITIONS
Push swivel latches upward on the back of the support frame, then rotate the seat in either direction. Release swivel latch to lock the seat at quarter- turn positions. Seat swivels 360° for easy on and off-loading, feeding, and interaction in any direction.

**** INCLUDED PARTS

NOTE: Seat, Cushion Insert, and 5-Point Harness are pre-assembled.

How to Use

HOW TO ASSEMBLE

  1. ATTACH LEGS TO FRAME
    Attach lower legs (A, B, C, D) to matching upper legs. Screw legs counter- clockwise until secure.
    NOTE: If letters do not match, leg lengths may differ.

  2. INSTALL SEAT
    Push seat posts into support frame until seat locks click into position. Be sure the seat is securely connected to the frame before use.
    To uninstall, press seat locks on both sides and lift the seat.
    NOTE: Seat, Cushion Insert, and 5-Point Harness are pre-assembled.

  3. ADD CUSHION INSERT
    Place (optional) cushion inserts onto the seat.
    NOTE: Cushion insert is recommended for infants.

  4. INSTALL SEAT
    The 5-point harness is installed by preset. A 5-point harness is recommended for your child’s full security.
    A. Lay lower harness straps across the seat with buckle facing upward. There should be 3 straps (2 sides, 1 front) with anchors at each end.
    B. Starting at an end, turn anchor sideways. Grasp the anchor and end of the strap together, then push them through matching slots in both cushion insert and seat. There are 2 side slots and 1 front slot.
    C. Once the anchor is through, flatten it against the outside of the seat to prevent the strap from retreating.Repeat for anchors on remaining straps.

D. Lay upper harness straps on the seat. There should be 2 side straps with anchors and a pair of Y-straps with hook clips.
E. Strap adjusters on Y-straps should face the back of the seat when straps are held straight up.
F. Turn anchor sideways and route through side slot in cushion insert and seat. Use the same slot as for the lower harness side strap, but BEHIND that strap.
G. Flatten anchor against the outside of the seat to prevent the strap from retreating.

Repeat for an anchor on another side. Y-straps do not need to be attached to the seat.

SEATING YOUR CHILD

**** **** ****

A. Unbuckle side straps by pressing harness buckle release button. Place the child in the seat, then re-connect side straps to the harness buckle.

B. Use strap adjusters to lengthen or shorten straps, if necessary. All straps should be snug against your child’s body but not too tight.

C. After connecting lower strap buckles in the previous step, pull upper harness Y-straps over your child’s shoulders and down to harness buckle.

D. Use strap adjusters to lengthen or shorten straps, if necessary. All straps should be snug against your child’s body but not too tight.

NOTE: Upper harness Y-straps should go over your child’s shoulders like suspenders.

Attach hook clips to rings on harness buckle. Check that Y-straps are not twisted behind your child’s back.

ATTACHING TRAY

IMPORTANT: Always secure child using a harness when seated in a chair.
Align grooves on the underside of the tray with the sides of the seat.

Pull release levers on both sides of tray outward, then slide tray toward seat until it locks into place. There are two tray positions.

To remove the tray, pull release levers on both sides and then slide the tray out.

The tray has a detachable insert for easy cleaning. Simply lift to remove.

HOW TO CLEAN

SURFACES
Wipe seat, tray, harness, and frame using a damp sponge. Wipe dry.

CUSHION INSERT
Wipe with a clean damp cloth, Do not bleach, Air-dry, Do not iron, Do not machine wash or dry.

TRAY AND INSERT
Dishwasher safe.

TECHNICAL SPECIFICATIONS

  • Product Name: 360° Cloud ™
  • Model: MCKA0817 REV1
  • Dimension: Length 28″ (71 cm), Weight 28″ (71 cm) , Height 40″ (102)
  • Weight: 16 lbs. (7.2 kg)

WWW.jpma.org

Customer Service

ONE-YEAR LIMITED WARRANTY

Munchkin’s High chair includes a 1-year limited warranty against defects from the date of purchase. In the event of a malfunction or defect during the in- warranty period,
Munchkin, Inc. at its option, will replace or repair the product under warranty. Upon receipt of the product and proof of purchase with a valid date of purchase, the defective
part will be immediately repaired or replaced and returned to you free of charge (the USA only). Please send defective unit, proof of purchase, and a description of the problem you have encountered to:

Munchkin, Inc.
7835 Gloria Avenue
Van Nuys, CA 91406, USA
Attn: High chair Warranty

NOTE: This warranty does not cover misuse, abuse, abnormal wear & tear, negligence, environmental exposure, alteration or accident. Any alteration or removal of the product date code invalidates all claims against the manufacture.

CONTACT US

If you have any questions or wish to provide comments about this product, feel free to contact our Customer Satisfaction team at 1-800-344-BABY (2229) (M-TH 8:00 am- 5:00 pm PST, F 8:00 am-1:00 pm PST) or visit our website at www.munchkin.com.

© 2020 MUNCHKIN, INC.
7835 GLORIA AVE., VAN NUYS,
CA 91406. MUNCHKIN BABY CANADA LTD.,
3-8460 MOUNT PLEASANT WAY, MILTON,
ON L9T 8W7. MADE IN CHINA

munchkin.com
800.344.2229

Documents / Resources

| munchkin 17584 Clear Seat High Chair [pdf] User Guide
17584, Clear Seat High Chair
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals