MeTra 95-7019 Mitsubishi Mirage 2017-2020 Dash Kit Instruction Manual
- June 6, 2024
- Metra
Table of Contents
MeTra 95-7019 Mitsubishi Mirage 2017-2020 Dash Kit Instruction Manual
KIT FEATURES
- ISO DDIN radio provision
- High polished processing provides a gloss black finish that’s similar to both the aftermarket radio and factory finish.
KIT COMPONENTS
-
Radio trim panel
-
Radio brackets
-
Phillips screws (4)
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Visit metraonline.com for
audio/ video and steering wheel control interface options. Antenna Adapter:
Not required
TOOLS REQUIRED
- Panel removal tool
- Socket wrench
- Phillips screwdriver
Attention! With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product.
DASH DISASSEMBLY
-
Unclip and remove the trim panel surrounding the radio including the vents. (Figure A)
Figure A -
Remove (4) screws securing the radio. Slide the radio out, then unplug and remove. (Figure B)
Figure B
Continue to Kit Assembly
KIT ASSEMBLY
-
Attach the radio brackets to the radio trim panel using (4) #(8) x 3/8” Phillips screws supplied. (Figure A)
Figure A -
Slide the radio into the completed assembly, and then secure it to the assembly using screws supplied with the radio. (Figure B)
Figure B -
Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
-
Reassemble the dash in reverse order of disassembly
SUPPORT
Mitsubishi Mirage2017-2020
Mitsubishi Mirage G42018-2020
Visit MetraOnline.com for more detailed information
about the product and up-to-date vehicle specific applications.
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at: techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM
KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians
Metra. The World’s Best Kits.®
MetraOnline.com
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
REV. 8/11/21 INST95-7019
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>