LION BRAND Felicity Scarf M20298 LT Instructions

June 6, 2024
Lion Brand

LION BRAND Felicity Scarf M20298 LT Instructions

SKILL LEVEL – EASY SIZES

About 7 1/2 x 81 in. (19 x 205.5 cm)

MATERIALS

  • LION BRAND® LOW TIDE (Art. #211) #404 Reef 3 balls
  • LION BRAND® knitting needles size 9 (5.5 mm)
  • LION BRAND® stitch markers
  • LION BRAND® large-eyed blunt needle.

GAUGE

23 sts = about 3 3/4 in. (9.5 cm) in Lace pattern.
BE SURE TO CHECK YOUR GAUGE.

STITCH EXPLANATION

skp (slip, knit, pass over) Slip 1 as if to knit, knit 1, pass slip stitch over knit stitch – 1 st decreased. yo (yarn over) An increase that also creates a small decorative hole (eyelet) in the fabric, worked as follows:

  1.  Bring yarn to front, between the needles.
  2. Take yarn to back, over the right needle. This creates the new st. You are now ready to proceed with the next st as instructed.

PATTERN STITCHES

K1, p1 Rib (worked over an even number of sts)
Row 1: Sl 1 wyib, p1, k1, p1; rep from to end of row.
Row 2: Sl 1 wyib, k the knit sts and p the purl sts.
Rep Row 2 for K1, p1 Rib.
I-Cord Edging (worked over 3 sts)
Row 1 (RS): K1, sl 1 wyif, k1.
Row 2: Sl 1 wyif, k1, sl 1 wyif.
Rep Rows 1 and 2 for I-Cord Edging.
Lace Pattern (worked over multiple of 10 sts)
Row 1 (RS): Yo, skp, k8; rep from across.
Row 2 and all WS rows: Purl.
Row 3: K1, yo, skp, k5, k2tog, yo; rep from across.
Row 5: K2, yo, skp, k3, k2tog, yo, k1; rep from across.
Row 7: K5, yo, skp, k3; rep from across.
Row 9: K3, k2tog, yo, k1, yo, skp, k2; rep from across.
Row 11: K2, k2tog, yo, k3, yo, skp, k1; rep from across.
Row 12: Purl.
Rep Rows 1-12 for Lace pattern.
Slip Stitch Ridge Pattern (worked over multiple of 10 sts)
Row 1 (RS): (K9, sl 1 wyib) twice (sl 1 wyib, k9) twice.
Row 2: (K9, p1) twice, (p1, k9) twice.
Rep Rows 1 and 2 for Slip St Ridge pattern.
Mesh Pattern (worked over an even number of sts)
Row 1 (RS): Yo, k2tog; rep from across.
Row 2: Purl.
Row 3: K2, yo, k2tog; rep from across.
Row 4: Purl.
Rep Rows 1-4 for Mesh pattern.

NOTES

  1.  Scarf is worked back and forth in rows of multiple pattern stitches.

  2. The first st of ribbing rows is slipped, and the first and last 3 sts of pattern rows are worked in I-cord Edging pattern, to keep the edges neat.

  3. With yarn in front (wyif) refers to the side of the work facing you as you work the row; with yarn in back (wyib) refers to the side of the work that is away from you as you work the row. To move yarn
    from front to back or back to front, bring yarn between needles. Take care not to wrap yarn over a needle, this could create an additional st.

  4. You may find it helpful to place a marker between the repeats across the first row of the Lace Section.

  5. When you see ‘work in patterns as established’ in the instructions, this means to work the next row of the patterns, lining up sts as in previous rows.

SCARF

Cast on 46 sts.
Work in K1, p1 Rib until piece measures about 2 in. (5 cm) from beg.

Lace Section

Row 1 (Set-Up Row – RS): Work Row 1 of I-cord Edging pattern over first 3 sts, place marker (pm), work
Row 1 of Lace pattern to last 3 sts, pm, work Row 1 of I-cord Edging pattern over last 3 sts. Slip markers as you come to them.
Keeping first and last 3 sts in I-cord Edging pattern, work in Lace pattern as established between markers until Lace Section measures about 19 in. (48.5 cm), end with a Row 12 of Lace pattern as the last row you work.

Garter Stitch Section

Keeping first and last 3 sts in I-cord Edging pattern, work in Garter st (k every st on every row) between markers for 6 rows.

Slip St Ridge Section

Keeping first and last 3 sts in I-cord Edging pattern, work in Slip St Ridge pattern between markers for about 38 in. (96.5 cm), end with a WS row as the last row you work.

Garter Stitch Section

Keeping first and last 3 sts in I-cord Edging pattern, work in Garter st between markers for 4 rows.

Mesh Section

Keeping first and last 3 sts in I-cord Edging pattern, work in Mesh pattern between markers for about 19 in. (48.5 cm), end with a Row 4 of Mesh pattern as the last row you work.

Ribbing

Work in K1, p1 Rib for about 2 in. (10 cm). Bind off.

FINISHING

Weave in ends.

Blocking

Soak Scarf in cold water with a small amount of wool wash for about 15 minutes. With a towel, squeeze out the excess moisture. Lay piece flat to dry.

ABBREVIATIONS

beg = begin(ning)(s)
k = knit
k2tog = knit 2 stitches together
p = purl
rep = repeat
RS = right side
sl = slip
st(s) = stitch(es)
wyib = with yarn in back
wyif = with yarn in front

Every effort has been made to produce accurate and complete instructions. We cannot be responsible for variance of individual knitters or crocheters, human error, or typographical mistakes.
©2021 Lion Brand Yarn Company, all rights reserved.

For thousands of free patterns, visit our website www.LionBrand.com
To order visit our website www.lionbrand.com or call: (800) 258-YARN (9276) any time!
Copyright ©1998-2021 Lion Brand Yarn Company, all rights reserved. No pattern or other material may be reproduced — mechanically, electronically, or by any other means, including photocopying – without written permission of Lion Brand Yarn Company.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals