ELECOM WRH-300xx3 300Mbps Wifi Portable Router AC Adapter User Manual

: June 6, 2024
: ELECOM

Table of Contents

Names and Function of Parts
(※)Supplying Power
Connecting to a Wireless LAN Router (Router Mode or Access Point Mode)
Connection
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WRH-300xx3 / WRH-300xx3-S
Simple Manual

Names and Function of Parts

1| ETHERNET lamp (green)| Off| A wired connection has not been established.
---|---|---|---
Lit| A wired connection has been established.
Blinking| Data is being transferred.
2| WLAN lamp(green)| Blinking| The wireless connection is enabled.
3| WPS/RESET lamp (green)| Blinking| The WPS function is in operation
Lit| The reset function is starting
4| ETHERNET port| Use a LAN cable to connect this product to the hotel’s LAN port.
5| WPS button| Hold down this button for approximately three seconds to start the WPS function
6| Reset button| Hold down this button for approximately five seconds to start the reset function
7| USB connector
(power supply)| Power is supplied to the product from an AC adapter or via USB from a Micro-USB(micro-B to A)cable.

(※)Supplying Power

Supply power using a PC USB port and the included USB (Micro-B to A) cable
Supply power using a separately sold USB power supply adapter and the included USB (Micro-B to A) cable
Use a USB power supply adapter that has an output of 5 V and 500 mA or more.

Connecting to a Wireless LAN Router (Router Mode or Access Point Mode)

Connect a LAN cable (either one that you have purchased separately or one that is provided by the hotel) to the
LAN port in the hotel room and to this product’s ETHERNET port.
Supply power to the product according to the instructions under “Supplying Power.”
Check that this product’s lamps are as shown below:
1| ETHERNET lamp| Lit in green or blinking in green
---|---|---
2| WLAN lamp| Lit in green or blinking in green
4| PS/RESET lamp| Off
Connect to the network according to the instructions under “Procedure 2, Connection.”

Connection

A. Windows 8.1 / 8 / 10

Point to the upper-right corner of the screen to display the Charms bar, and then click [Settings].
Click the wireless icon.
From the list of networks, select the network that has the same SSID as the network written on the included “Setup Information Sheet,” and then click [Connect].
Check that the message “You can also connect by pushing the button on the router.” is displayed.
Hold down the product’s [WPS] button for approximately 3 seconds. When you release the button, the product’s “WPS/RESET lamp” will start to blink in green.
If a screen is displayed with the message “Do you want to turn on sharing between PCs and connect to devices on this network?”, click “Yes, turn on sharing and connect to devices.”

B. Windows 7/Vista/XP

Click the wireless LAN icon in the notiﬁcation area in the lower-right corner of the screen.
From the list of networks, select the network that has the same SSID as the network written on the included “Setup Information Sheet”, and then click [Connect].
When the “Connect to a Network” dialog box is displayed, enter the (13-digit) encryption key written above, and then click [OK].
If you are using the WPS function to establish the connection, hold down the product’s [WPS] button for approximately 3 seconds. When you release the button, the product’s “WPS/RESET” lamp will start to blink in green.
Eventually, the “Connect to a Network” dialog box will disappear automatically.

C. Mac OS (Wireless LAN Connection)

Click the [Apple menu] in the upper left of the screen, and then click [System Preferences].
Click [Network].
Check that “Status” for the AirMac (Wi-Fi) has changed to “On.”
From the list of networks, select the network that has the same SSID as the network written on the included “Setup Information Sheet.”
A password entry screen will be displayed, so enter the (13-digit) encryption key written on the “Setup Information Sheet,” and then click [OK].

D. Smartphones and tablet PCs（iOS/Android）

Install the simple setup application “QR link” (free of charge), and then conﬁgure the settings.

From your terminal, open the AppStore (iOS) or Google Play (Android), search for [QR link], and then install the software.
On your terminal’s home screen, tap the [QR link] icon.
Tap [Read QR Code] to read the QR code printed on the included “Setup Information Sheet.”
Follow the instructions on the screen, and then tap [Close] to ﬁnish the procedure.

Depending on the hotel, the web browser (such as IE and Safari) may require you to certify yourself. In this situation, check with the hotel regarding how to do this.