Shenzhen G1619-01 Mini computer User Manual

G1619-01 Mini computer

=/43G^
; 9 + 83 ‘ 4 ; ‘ 2
XXXHQEIL

Connect to displays, projectors and other video displays. Output UHD digital videos. 8JUI )%.* C 4QFDJDBUJPO
JU JT POMZ GPS UIF PVUQVU PG EJHJUBM videos, and cannot connect to power adapters to charge devices.

Connect to external devices such as docks and U-disks for data transfer.

Charge mobile phones, etc.

Connect to external portable Wi-Fi or USB network cards for access

to the internet.

It supports charging but not reverse charging.

Connect to power adapters or mobile power packs to charge devices.

Connect to displays, docks and other external devices.

Output UHD digital videos.

Charge laptops, mobile phones, and tablets.

Connect devices with eGFX, to improve the game experienc.

This port requires charging with a power adapter that supports PD

protocol or a mobile power supply.Linking the thunderbolt 3 socket

needs dual USB Type-c father port to father port marked with

cables.

Reset BIOS. When WIN Max has something wrong with boot or cannot be started BGUFS #04 JT NBOVBMMZ NPEJFE
QSFTT 3FTFU UP SFTFU #04 UP UIF JOJUJBM status.

Connect to external devices such as docks and U-disks for data transfer. Connect to mobile phones and pads for charging, reverse charging BOE MF USBOTGFS Connect to power adapters to charge devices. Power adapters are required to support PD protocol. It is a fully featured interface but its standard cable is not a fully featured one. To connect displays, projectors and other video displays, can buy a fully featured cable.

Red/green.

The indicator is red when the charger is connected for charging and

JU JT HSFFO XIFO UIF EFWJDF JT GVMMZ DIBSHFE 5IF JOEJDBUPS JT P BGUFS

the charger is disconnected.

8IJUF MJHIU BTIFT 1SFTT ‘O’ ,FZ DPNCJOBUJPO
UIF GBO TIVU EPXO
XIJUF MJHIU BTIFT TFDPOE BTIJOH QFSJPE
T PO
T P “GUFS UVSOJOH PO
UIF GBO TU keeps the speed of 30% unchanged when the temperature is below “CPWF
UXP GBOT NBJOUBJO SPUBUJPO TQFFE &OUFS 4 453 4VTQFOE UP 3”.
TUBUF XIJUF MJHIU P “GUFS UIF 4 TUBUF disappears, keep the state before entering S3 state.
Blue. The indicator is normally on in blue during startup,running and BTIFT JO CMVF EVSJOH TUBOECZ
Left trigger key of the GamePad. %VSJOH HBNJOH
UIF MFGU GPSFOHFS IPMET JU 5P QFSGPSN TPNF BDUJPOT
this key has to be used with other keys together.

Right trigger key of the GamePad. %VSJOH HBNJOH
UIF SJHIU GPSFOHFS IPMET JU 5P QFSGPSN TPNF BDUJPOT
this key has to be used with other keys together.
Display images and support 10-point touch.

Switch to GamePad mode or Mouse mode.

While switching to the GamePad status, the machine GamePad is

activated and then the mouse can only be controlled with the

touchpad and the keyboard is available for input.While switching UP UIF .PVTF TUBUVT
UIF (BNF1BE JT UVSOFE P BOE UIF NPVTF JT

BDUJWBUFE “U UIJT NPNFOU
UIF SJHIU KPZTUJDL PG UIF (BNF1BE JNJUBUFT

mouse movement; L1 key imitates the left mouse button; R1 key

imitates the right mouse button.

Left joystick of the GamePad. Press the joystick to implement the functions of L3.While switching to the Mouse mode, the left joystick does not work.

Right joystick of the GamePad. Press the joystick to implement the functions of R3.While switching to the Mouse mode, the right joystick is the mouse button.

GamePad arrow key, split type. “GUFS TXJUDIJOH UP UIF NPVTF NPEF
VQ BOE EPXO BSSPX LFZT BSF »¼ keys on keyboard and the left arrow key is PgDn on keyboard.

GamePad function key. The function key is of dual-character silkscreen to distinguish between PS GamePad and Xbox GamePad. While switching to the mouse mode, the function key is recognized as keys º»¹¼ on keyboard.
6OEFS UIF (BNF1BE TUBUVT
4&-&$5 LFZ JT PGUFO VTFE BT TFMFDU HBNF control settings. 6TVBMMZ
4&-&$5 LFZ JT VTFE GPS RVJDL MPHJO BOE $POOFDUJOH ‘JOHFS activation.
” VOJRVF CVUUPO PO 9CPY (BNF1BE To play Xbox streaming games, apart from as GamePad switch, Xbox key also works as “Back to homepage”,”Press and hold to turn P§
¦4DSFFODBTU§
BOE ¦4OBQ TXJUDI§
6TVBMMZ DPOSN UP TUBSU HBNF
1PXFS PO
QPXFS P
IJCFSOBUF
BOE XBLF VQ 1SFTT UIF QPXFS CVUUPO _ TFDPOET GPS TUBSUVQ “U TUBSUVQ
RVJDLMZ press the power button to make the device sleep and quickly press the button again to wake up the device. Press and hold the button 10 seconds for shutdown.
Similar to the functions of a mouse, easier device control. Support input, be designed with press button, and support the BDUJPOT CZ OHFST BU NPTU

&OUFS &OHMJTI MFUUFST
OVNCFST
BOE QVODUVBUJPOT #BDLMJHIU JT BWBJMBCMF PO LFZCPBSE BOE UVSOFE PO CZ ‘O’
NN JOUFSGBDF JOUFHSBUFE XJUI IFBETFU BOE NJD
Independent mic interface.
Wired network port. To access to the wired network, the network cable has to be connected.
Support MicroSD card. 4VQQPSU .JDSP4% DBSET PG TQFDJDBUJPOT ”
6
$
7
BOE CF CBDLXBSEDPNQBUJCMF XJUI .JDSP4% DBSET PG TQFDJDBUJPOT ”
6
C10.
Intake cold air.
&YIBVTU IPU BJS

Use the Built-in power adapter and USB-C charging cable of WIN Max for charging. Third-party accessories may downgrade the performance and have safety concerns.
Charge WIN Max within a proper temperature range and in a ventilated and cool place. WIN Max may be damaged if it is charged at high temperature. WIN Max charging time will vary with the temperature and battery usage. It is normal that WIN Max will be heated on the surface after working and charging long time. Close some applications and stop charging when WIN Max is too hot.

You can judge the current battery status through the battery icon on the screen. When WIN Max is connected with power, the connected battery icon will be shown. When the device is in use, move the cursor to the battery icon to check the remaining power and remaining service time. #BUUFSZ JT DPOTVNBCMF *G ZPV OE UIBU UIF TUBOECZ UJNF JT HSFBUMZ SFEVDFE
EP OPU change the battery by yourself and contact the after sales customer service to replace it with an original one.

“U UIF STU TUBSUVQ
DIBSHF 8*/ .BY WJB QPXFS BEBQUFS BOE 64#$ DIBSHJOH DBCMF “U TIVUEPXO PS IJCFSOBUJPO
QSFTT UIF QPXFS CVUUPO VOUJM UIF TDSFFO JT CSJHIU
UIFO ZPV DBO start or wake up the device. Under normal service, click > , to make the device sleep, shut down or restart.
Force to shut down WIN Max by pressing and holding the power button for 10s. In this case, the data not saved may be lost.

‘O’ UVSO P WPMVNF Fn+F2: turn down volume. Fn+F3: turn up volume. Fn+F4: reduce screen brightness. ‘O’ JODSFBTF TDSFFO CSJHIUOFTT ‘O’ UVSO PO PS P LFZCPBSE CBDLMJHIU Fn+F7: play and pause button of the player. Fn+F8: fast backward button of the player.

Fn+F9: fast forward button of the player. Fn+F10: stop button of the player. Fn+F11: print the screen. Fn+F12: switch the input mode, namely, insert or cover FnFn+[ : output the character |. FnFn+]: output the character . ‘O: pop up the right key, which will be used in
individual applications. Fn+left arrow key: output Home and go back to home. Fn+upper arrow key: output PgUp and page up. ‘OSJHIU BSSPX LFZ PVUQVU &OE BOE HP CBDL UP UIF FOE Fn+lower arrow key: output PgDn and page down.

,QSXW9ROWDJH

-6*=/43G^

=/43G^

XXXHQEIL

ab aHDMI 2.0ba Yazb

USBb b Wi-FiUSB b a zb

b b b aab eGFXab WIN Max 7KXQGHUEROW 7KXQGHUEROW86%7SH&
BIOSb WIN MaxBIOS aBIOS b

/

aUSBab a b bPDb a zb aYb
/b ab b
FN+FOFFab a130%a ba30%b S3(
aaS3b
b ab
~

~

~

~

~~^ ~~

~ ~

~ ~

ab a»¼ aPgDnb

~

~ ~~  
~~^  
~ ~

j  
°

~

~

~

aab ‘O ‘zab  
NN~

~ ~~

/  
/  
/ /^/ /// ~ /

//  
/ /° / / /

^

/ / ° °  
°

~ °~~

~

Fn+F12/ Fn+[| Fn+] Fn+Homea Fn+ PgUpa Fn+&OEa Fn+PgDna

~ ~  
~

~

~  
~  
^°~ ~ ~~~

~°

~

~ ~

~  
°~ ~~ ~ ~~ ° ~ ~

~ ~  
~

~ ~

° °

°

Warning 6tatement  
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.  
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.  
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.  
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.

## Read User Manual Online (PDF format)

[Read User Manual Online (PDF format)  >>](/pdf/461678-next-post-next-postshenzhen-bm02-baby-monitor-camera-user-manual)

## Download This Manual (PDF format)

[Download this manual  >>](https://manuals.plus/m/7a8180975ee81e2e3ca88b4d159391ed2a49bb99afa7e235a5e043616a822c60_optim.pdf)