PHILIPS 242B1G00 24-Inch FHD Monitor Owner’s Manual

Monitor
Important Information manual
Register your product and get support at
www.philips.com/welcome

Regulatory Information
Lead-free Product
Lead-free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with the European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout their life cycle.

EPEAT (Only applicable to the model of application)
(www.epeat.net))
The EPEAT (Electronic  Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on environmental criteria developed through an extensive stakeholder consensus process supported by US EPA.
EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks, and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of  products and provides an opportunity for manufacturers to secure market
recognition for efforts to reduce the environmental impact of its products.

Benefits of EPEAT (Only applicable to the model of application)
Reduce the use of primary materials.
Reduce the use of toxic materials.
Avoid the disposal of hazardous waste.
EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications, means that these products will consume less energy throughout their life.

Extending the lifetime of IT products is the most effective way to reduce their environmental impact. The product has no parts for upgradability but has the replaceable and/or repairable components or assemblies as below for 5 years after the point of sale.

Components or Assemblies| Replaceable| Repairable| How to Replace or Repair
---|---|---|---
Connectivity cables| Yes| No| By hand without tool, but please contact your dealer or your local service center (refer to Service contact information listed in Important information manual) for confirming the specification of the cable when necessary.
Power cables| Yes| No
External power supply| Yes| Yes| For replacing, please follow the above action. For repairing, please just contact your local service center (refer to Service contact information listed in Important information manual) for help when necessary to avoid any risk.
Display panel or display

assembly

| No| Yes| Please just contact your local service center (refer to Service contact information listed in the Important information manual) for help when necessary to avoid any risk.
Internal power supply| No| Yes

Toward sustainable IT products

Spare parts Service
Spare parts are available for use of the EPEAT registered products (refer to www.epeat.net ) for minimum 5 years after the point of sale or 2 years after the end of production,
whichever is longer.
Spare parts are available for use of non-EPEAT registered models for a minimum of 3 years or 1 year after the end of the product, whichever is longer.
For spare parts service please contact your local service center (refer to Service contact information listed in Important information manual) for help when necessary.

Say hello to a more sustainable product

IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality, and when they are not able to be repaired or upgraded.
This product is a better choice. It meets all the criteria in TCO Certified, the world’s most comprehensive sustainability certification for IT products. Thank you for making a  responsible product choice, that helps drive progress towards a more sustainable future!
Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility, or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of active non-conformities. And last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly.

Want to know more?

Read information about TCO Certified, full criteria documents, news, and updates at tcocertified.com. On the website, you’ll also find our Product Finder, which presents a complete, searchable listing of certified products.

The user defines mode is used for TCO Certified compliance.  (Only applicable to the model of application)
Energy Star Declaration (Only applicable to the model of application)
(www.energystar.gov)
ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) andU.S. Department of Energy (DOE) that promotes energy efficiency.
This product qualifies for ENERGY STAR in the “default” settings and this is the setting in which power savings will be achieved.
Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for an ENERGY STAR rating.
For more information on the ENERGY STAR program, refer to energystar.gov.
Note

• To prevent possible hearing damage, do not listen to high volume levels for long periods.
• We recommend you switch off the monitor when it is not in use for a long time.

Federal Communications Commission (FCC) Notice (U.S. Only)
****This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
To prevent damage that may result in fire or shock hazards, do not expose this appliance to rain or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16  amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.
A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/ E-06251.

Restriction on Hazardous Substances  statement (India)

This product complies with the “E-Waste (Management) Rules, 2016” CHAPTER V, rule 16, sub-rule (1). Whereas New  Electrical and Electronic Equipment and their components or consumables or parts or spares do not contain Lead, Mercury, Cadmium, Hexavalent Chromium, polybrominated biphenyls, and polybrominated diphenyl ethers beyond a maximum concentration value of 0.1% by weight in homogenous materials for lead, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers and of 0.01% by weight in homogenous materials for cadmium. except for exemptions set in Schedule 2 of the Rule.
E-Waste Declaration for India
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about E-waste please visit http://www. india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below-given contact details.
Helpline number: 1800-425-6396
(Monday to Saturday, 9 a.m. to 5:30 pm)
The centralized E-waste collection center
Address:
TPV Technology India Private Limited,
59, Maheswari Nagar, 1st Main Road,
Mahadevapura Post,
Whitefield Road,
Bangalore, Karnataka, PIN:
560048, Tel: 080-3023-1000
E-mail: india.callcentre@tpv-tech.com Information for the U.K. only
WARNING – THIS APPLIANCE MUST BE EARTHED.
Important:

This apparatus is supplied with an approved molded 13A plug. To change a fuse in this type of plug proceed as follows:

1.  Remove fuse cover and fuse.
2.  Fit new fuse which should be a BS 1362 5A, A.S.T.A. or BSI approved type.
3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.
NOTE : The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. How to connect a plug

The wires in the mains lead are colored in accordance with the following code:
BLUE -“NEUTRAL”(“N”)
BROWN -“LIVE”(“L”)
GREEN&YELLOW -“EARTH”(“E”)

1. The GREEN&YELLOW wire must be connected to the terminal in  the plug which is marked with the letter “E” or by the Earth symbol or colored GREEN or
   GREEN&YELLOW.

2.  The BLUE wire must be connected to the terminal which is marked with the letter “N” or colored BLACK.

3. The BROWN wire must be connected to the terminal which is marked with the letter “L” or colored RED.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead – not simply over the three wires.

Warranty Statement

PHILIPS LCD Monitor’s warranty period is listed as below, for areas not covered in this table, please follow their warranty statement.

LCD monitors B, BDM, M, 5, X, P, V lines(for V line, applies to the product purchased from 1st Dec 2019)| 36 months
Brazil| LCD monitors C, E, V, T, and G lines| 1 year
LCD monitors B, BDM, M, 5, X, P tines| 3 years

Service contact information
Contact Information for EUROPE region:

2020 © TOP Victory Investments Ltd. All rights reserved.
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem have registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>