TACTICAL Mine Magforce Wireless User Manual
- June 6, 2024
- TACTICAL
Table of Contents
Mine Magforce Wireless
USER MANUAL
Installation
After removing both parts from the box, loosen the cap nut and force the ball
pin into the mounting bracket portion of the bracket. Tighten the union nut.
Later, enable it to set the desired angle of the phone and tighten it to fix
the selected position.
Turn the locking lever counterclockwise to the extreme position, the jaws will
open to the maximum. Insert the jaws into the ventilation grille as far as
possible and turn the locking lever clockwise to the outermost position.
Caution, if the lamella of the ventilation grille is higher than 2 mm, do not
try to push the lever to the very extreme position, as this could damage the
clamping mechanism.
Specifications
| Voltage | 5V/9V/12V |
|---|---|
| Current | 2A |
| Output power | 5W/7.5W/10W/15W |
| Charging frequency | 110-205KHZ |
| FCC ID | 2APCQ-G15 |
Package contents:
- Mine MagForce Wireless holder
- USB-C power cable
Compatibility
The holder is designed for Apple iPhones series 12 and 13. Its use is not recommended with other phones.
Assembly instructions
The holder is only suitable for the Apple iPhone series 12 and 13.
It can be used with a cover with Apple MagSafe support or on the Apple iPhone
12 and 13 series itself without a cover.
- A cover is required for a phone with a cover with a magnet for Apple MagSafe.
Warning
Do not disassemble or damage the bracket. Do not expose the holder to
temperatures outside the range of -10 – 60 ° C. Clean the holder only with a
damp cloth and do not use solvents.
Manufacturer: Shenzen Taiworld Technology Co., Ltd, Room 706, Building No. A,
Tian Hui Building, DongHuan 1st R, Shenzen China Importer: Bakr s.r.o.
Tfebohosticka 564/9, 10000, Praha Czech Republic
Declaration of conformity – simplified form: The manufacturer Shenzen Taiworld
Technology Co., Ltd proves that the product complies with the declaration of
conformity 2014/53 / EU You can also view it at: www.tacticalprodu-
cts.eu/download/certificates/mine_magFor-ce_wireless
