CANPOL BABIES 77-053 4 in 1 Bottle Warmer and Sterilizer with Thermostat User Manual

CANPOL BABIES 77-053 4 1 Bottle Warmer and Sterilizer with Thermostat

Product Information

Specifications

• Device: 4-in-1 Bottle Warmer and Sterilizer with Thermostat
• Power Supply: AC 220-240V, 50/60 Hz
• Power: 600 W
• Weight: Approximately 690 g

Product Components

1. Components of Bottle Warmer
   • Adapter ring
   • Basket for a bottle/jar
   • Heating chamber
   • Control panel
   • Power cord
   • Measuring cup
2. Control Panel
   • Display
   • Heating settings
   • Temperature increasing
   • Temperature decreasing
   • On/off button

Product Usage Instructions

1. HOT MODE – FAST HEATING
2. Place the warmer on a flat and stable surface, out of reach of children.
3. Add pre-boiled/demineralized water to the heating chamber as per the recommended quantities.
4. Use the provided measuring cup to measure the exact amount of water accurately.
5. Place the bottle/jar basket in the heating chamber.
6. Put an adapter ring on the warmer’s body to limit escaping vapor.
7. Place the bottle or container in the basket for heating.

Safety Rules

1. Read the entire instruction manual carefully before using the electric bottle warmer.
2. Follow all safety instructions to avoid burns or damage to the product.
3. This device is designed for domestic use only.

Cleaning and Maintenance

Refer to the Descaling section in the manual for information on maintaining the proper functioning of the warmer and preventing limescale build-up on the heating chamber.

Sterilization and Disinfection

The warmer facilitates steam disinfection of bottles and small feeding bottle accessories. Follow the instructions provided for effective sterilization.

FAQ

Q: Can this product be used for heating breast milk?

• A: Yes, this product can be used to heat breast milk to the ideal temperature for feeding.

Q: How often should I describe the heating chamber?

• A: It is recommended to descale the heating chamber regularly to maintain the product’s efficiency. Refer to the Descaling section in the manual for detailed instructions.

SAFETY INFORMATION

• PLEASE READ THE ENTIRE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE ELECTRIC BOTTLE WARMER. THE DEVICE IS DESIGNED FOR DOMESTIC USE ONLY.
• RETAIN THIS INSTRUCTION FOR LATER USE, AS IT CONTAINS IMPORTANT INFORMATION.
• BATCH CODE ON THE PACKAGING.
• This product allows you to prepare food for children at the ideal temperature for serving, in just a few minutes. Regardless of whether the food was chilled in the fridge or is at room temperature, this device heats it quickly and evenly.
• The temperature maintenance modes allow you to serve food exactly when necessary. The warmer also facilitates food defrosting as well as steam disinfection of bottles and small feeding bottle accessories.

SAFETY RULES

• When using electrical devices, special safety precautions must be taken including:
• NOTE: To protect against electrical shock, do not immerse the cord, plug or device’s body in water or other liquid. Protect the device from getting wet and NEVER operate the device with wet hands.
• NOTE: To ensure constant protection against electric shock, the appliance should only be connected to sockets with a grounding pin. Always check that the plug is firmly plugged into the power socket.
• Before plugging in the device for the first time ensure that the voltage is compatible with your electricity supply by checking the label on the base of the unit. The correct voltage for Canpol Babies Electric Bottle Warmer is 220-240V.
• The product has been fitted with a cord slot on the base of the unit to allow you to adjust the length of the cord safely. It is recommended that the cord be kept as short as possible.
• The cord should not hang over the edge of the kitchen work surface or touch hot surfaces.
• A short power cord should be used to reduce the risks of tangling or tripping over a long power cable.
• Extension cords may be used if during their use they are adequately protected and are under appropriate supervision.

If extension cords are used:

1. The marked electrical voltage of the extension cord should be compatible with the electrical voltage indicated on the device.
2. The extension cord must be adapted to the device’s electrical load, according to the information provided on the nameplate.
3. The extension cord must bear the CE marking.
4. The extension cord cannot bear any signs of damage.
5. The cord should be arranged so that it does not drape over the worktop or tabletop where it can be pulled by children or tripped over unintentionally.

• If the device has a grounding plug, the extension cord must be a 3-wire cord type with a grounding pin.
• When removing the plug from the socket, hold the edge of the socket. Never pull the plug out of the socket by pulling on the power cord.
• Do not carry the device by the power cord.
• Do not place any power cords under furniture or other obstacles.
• DO NOT put on or near a hot gas or electric stove, or in a preheated oven. Make sure that the power cords are away from hot surfaces, radiators, and central heating pipes. Do not leave the device directly in the sun.
• NOTE! Do not use any device with a damaged cord or plug, after a failure of the device or any other damage.
• For safety reasons, the replacement of a damaged power cord or any repair should be carried out by the service center of the manufacturer or distributor.
• This device is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a guardian.
• Close supervision is necessary when any appliance is used by a disabled person or near children.
• Children should not clean or operate the appliance.
• ALWAYS keep the device out of the reach of children when not in use.
• Always unplug the device from an electric socket when not in use.
• There are no spare parts/repair elements for the appliance inside the packaging. Do not attempt to repair the appliance yourself.
• All repairs should be performed by the manufacturer or distributor service only.
• WARNING! FAILURE TO FOLLOW THIS MANUAL MAY RESULT IN BURNS OR DAMAGE TO THE PRODUCT
• The device should be used only for heating children’s food or for the steam disinfection of feeding bottles and their components.
• Improper use may damage the warmer and cause burns to the user.
• Do not use the product contrary to its intended use. Other uses violate the terms of the warranty.
• This device is intended for household use only. USE only indoors. DO NOT use outdoors.
• If the device has been transported at low temperatures, it should be acclimatized before use to equalize the appliance’s temperature with the ambient conditions.
• The device should be placed on a surface that is smooth, flat, stable, dry, resistant to moisture and high temperatures, and always out of the reach of children.
• NEVER turn on the device when there is no water in it.
• Before switching on the warmer, make sure that the correct amount of water specified in the instructions has been added to its container. The warmer should be emptied of any residual water before each subsequent use.
• The attached measuring cup should not be used to measure children’s food.
• DO NOT place any oil or flammable liquids in the container as it may cause a fire.
• During operation, there is hot water in the warmer, and/or hot vapor will escape from it. Be very careful as it can cause severe burns. Avoid contact with the skin.
• Keep your face and hands at a safe distance and do not place them above the device while it is in use.
• Do not move or lift the warmer while it’s turned on, or when it is filled with hot water.
• DO NOT touch the body of the device when it is turned on.
• The surface of the device may become hot during operation, and some areas may remain hot after it is finished.
• WAIT until the device cools down before removing or inserting new elements.
• After use, always pour the water out of the device after it has cooled down to avoid the possibility of burns. Do not store the device filled with water.
• Never leave the device plugged in when it is not in use. Always make sure it is switched off.
• This product is not a toy. Use and store the device and all its parts out of the reach of children.
• Do not disassemble the product.
• Do not redesign or modify the product. Any action contrary to this guideline cancels the EC declaration of conformity.
• If you have any doubts about the safety of the product, please contact with distributor or manufacturer.
• Check the product before each use. Do not use it if the device is damaged in any way. In case of damage, contact the manufacturer or distributor service.
• THE INSTRUCTIONS ABOVE MUST BE STRICTLY FOLLOWED.
• THE MANUFACTURER IS NOT LIABLE FOR DAMAGES RESULTING FROM THE MISUSE OF THE DEVICE.
• This marking indicates that the product should not be disposed of with other household wastes.
• To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
• For further information on the recycling of this product, please contact the municipal authorities in their area of waste disposal service or the supplier of the product.
• This product and its information meet the requirements of the WEEE Directive 2012/19/EU.
• The manufacturer declares that the product complies with European Union directives and harmonized standards. The product has been marked by conformity assessment procedures.
• The product meets the requirements of the directive concerning electrical equipment designed for use within certain voltage limits (LVD) 2014/35/EU, the Electromagnetic Compatibility Directive (EMC) 2014/30/EU, and the RoHS Directive 2011/65/EU.
• It is the Class I appliance

DEVICE SPECIFICATION

AC power supply| 220-240V, 50/60 Hz
Power| 600 W
Product weight with power cord| ca. 690 g

PRODUCT COMPONENTS

1. Components of bottle warmer
   • a. Adapter ring
   • b. Basket for a bottle/jar
   • c. Heating chamber
   • d. Control panel
   • e. Power cord
   • f. Measuring cup
2. Control Panel
   • a. Display
   • b. Heating settings
   • c. Temperature increasing
   • d. Temperature decreasing
   • e. On/off button
3. Display
   • a. Maintaining the temperature of liquid foods – bottle mode
   • b. Fast heating – steam disinfection – hot mode
   • c. Maintaining the temperature of solid foods – dinner mode
   • d. Working temperature

BEFORE FIRST USE

• Unpack the product from the foil packaging. Keep the packaging out of reach of children to prevent the risk of suffocation.
• Wipe the heating chamber of the warmer and the body with a damp cloth, and dry with a towel.
• Wash the adapter ring and the bottle/jar basket in warm water, using a mild detergent, and rinse with warm water.

HOT MODE – FAST HEATING

1. Place the warmer on a flat and stable surface, out from the reach of children, and where it can’t be knocked or moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.

2. Add the appropriate amount of water into the heating chamber, according to the quantities suggested in the table below.
   Important! Use pre-boiled/demineralized water, as it prevents limescale build- up in the heating chamber. The presence of limescale on the heating chamber is not subject to the warranty. Information on maintaining the proper functioning of the warmer can be found in the “Descaling” section.

3. To measure the exact amount of water, use the measuring cup supplied with the warmer. For measuring a larger amount of water use the measuring cup several times. The amount of water is one of the factors that affect the final temperature of the food, this is why it is very important to measure the water accurately.
   Many factors have an influence on heating time and temperature of the food after heating. The main ones are the starting temperature of the food, its quantity, type, and consistency, the type of material of the container (glass, plastic) in which the food is heated, and the amount of water used for heating. The indicated amounts of water are approximate. Due to the above factors, it is not possible to give the exact amount of water needed for heating. Optimal amounts of water can be easily determined experimentally. If the food is too hot, then next time add less water to the warmer. If the food is too cold, then the next time add more water to the warmer.

4. Place the bottle/jar basket in the heating chamber.

5. Put an adapter ring onto the warmer’s body to limit the amount of escaping vapor.

6. Place the bottle prepared for feeding or an open container/jar in the basket. Place the bottle/container/jar in the middle of the warmer to ensure even heating.

   • Note! Make sure that the bottle/container you choose is suitable for boiling according to the manufacturer’s instructions.

7. Plug the power cord into the power socket. All icons on the display will appear and then disappear, and you will hear a beep sound. This means that the warmer is receiving power.

8. Press the button. You will see “00” on the display which means standby mode.

   • Remember! Never turn on the warmer when there is no water in it.

9. Press the button three times, selecting the mode with the icon.

   • Note! Remember to use the right amount of water. If too much water is added, the food will be heated too long and its temperature may be too high.
   • Note! Rapid heating of food frozen in glass bottles and jars is NOT recommended

10. Please note that hot vapor is emitted while the warmer is operating. Be very careful as it can cause severe burns. Avoid contact with the skin.

    • Keep your face and hands at a safe distance and do not place them above the device while it is in use.
    • To avoid the possibility of burns, never move or carry the warmer while it is working.

11. After the water evaporates, and the food is heated, the warmer switches off automatically, signaling the end of the cycle with a „Dee-Dee-Dee” sound. To stop the warmer during the cycle, press the button to turn off the warmer, and then disconnect it from the power socket.

12. Always use a cloth when removing the bottles, containers, or jars from the warmer to avoid burns.
    Note! Do not touch the body or the heating chamber, because they are hot.

13. Shake the bottle to mix its contents. Stir food heated in an open container or jar with a spoon. It will ensure an even temperature distribution.

    • For the safety of your child, always check the temperature of the food before feeding. Place a small amount of food on the inner part of your wrist as the skin is delicate and sensitive at this spot.
    • For microbiological and hygiene reasons, milk or food that has already been heated and cooled down should not be reheated. If it has not been used, it should be disposed of.

14. If you intend to use the warmer again, start the procedure from the first step. If you have finished using the warmer, disconnect it from the mains.

HOT MODE – TABLE

HOT MODE – FAST HEATING

DINNER MODE – TABLE DINNER MODE 70 °C

fridge – heating time
125 g| 5 min| 10 min
190 g| 10 min| 15 min
250 g| 15 min| 25 min

MAINTAINING FOOD TEMPERATURE

1. Place the warmer on a flat and stable surface, out from the reach of children, and where it cannot be knocked or moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.
2. Add about 200 ml of water to the empty heating chamber.
3. Place the bottle/jar basket in the heating chamber.
4. Place the bottle prepared for feeding or an open container/jar in the basket. Place the bottle/container/jar in the middle of the warmer to ensure even heating.
5. Plug the power cord into the power socket. All icons on the display will appear and then disappear. This means that the warmer is receiving power.
6. Press the button. You will see “00” on the display which means standby mode. Remember! Never turn on the warmer when there is no water in it.
7. Press the function button, selecting the bottle mode or dinner mode
   • Maintaining the temperature of liquid foods – Bottle:
   • The temperature is pre-set to 40˚C. You can change the pre-set temperature in the range: of 35˚C – 50˚C, depending on your needs, by using the “-“ and “+” buttons on the control panel.
   • After setting the temperature, the warmer will start working at the set value, counting down the operating time starting from 10 hours.
   • During this time, the temperature of the water in the warmer will be maintained at the indicated level.
   • After 10 hours, the warmer will automatically end the cycle, signaling it with a “Dee-Dee-Dee” sound.
   • Maintaining the temperature of solid foods – Dinner:
   • The temperature is pre-set to 70˚C. You can change the pre-set temperature in the range: of 50˚C – 90˚C, depending on your needs, by using the “-“ and “+” buttons on the control panel.
   • After setting the temperature, the warmer will start working at the set value, counting down the operating time starting from 3 hours.
   • During this time, the temperature of the water in the warmer will be maintained at the indicated level.
   • After 3 hours, the warmer will automatically end the cycle, signaling it with a “Dee-Dee-Dee” sound.
   • For the safety of your children, always check the temperature of the food before feeding. Place a small amount of food on the inner part of your wrist as the skin is delicate and sensitive at this spot.
8. To stop the warmer during the cycle, press the button to turn off the warmer, and then disconnect it from the power socket.

FOOD DEFROSTING

In the warmer, you can easily and gradually defrost in a water bath food frozen in storage bags or containers dedicated to food freezing.

1. Place the warmer on a flat and stable surface, out from the reach of children, and where it can’t be knocked or moved during use. If you have any doubts, read the warnings at the beginning of the instructions again
2. Add about 200 ml of water to the empty heating chamber.
3. Place the basket in the heating chamber.
4. Put the frozen food in a bag or container into a basket.
5. Plug the power cord into the power socket.
6. Press the power button . Remember! Never turn on the warmer when there is no water in it.
7. Press the function button, select the bottle mode , and then use the „-” button to set the temperature to 35˚C.
   • As in the case of heating food in a bottle/container, the defrosting time depends on the same factors and its exact determination is not possible.
8. After complete defrosting, shake the container or stir the food in the container to mix the separated fat particles with the remaining volume of milk and pour it into the bottle.
   • To heat the milk placed in a bottle to a temperature suitable for serving to a child, use the „fast heating” mode.
   • Note!
   • NEVER defrost the food by using the “fast heating” mode.
   • NEVER refreeze previously defrosted milk.
   • Dispose of any milk that has not been used.

STEAM DISINFECTION

In the warmer, you can easily steam disinfect a bottle and other small accessories used for bottle and breastfeeding (e.g. nipple protectors).

1. Place the warmer on a flat and stable surface, out from the reach of children, and where it can’t be knocked or moved during use. If you have any doubts, read the warnings at the beginning of the instructions again.

2. Add about 75-85 ml of water to the empty heating chamber.

3. Place the basket in the heating chamber.

   • Important! Before beginning the steam disinfecting process, wash all the elements according to the instructions provided by their manufacturer, and rinse thoroughly.

4. Insert a bottle into the basket (upside down) or loosely arrange small accessories such as a feeding teat, cap, sealing disc, and bottle cap (bottom-up).
   When steam disinfecting other accessories used for babies or nursing mothers, place the items in the basket in such a way as to leave enough room for the hot vapor to reach them easily.

5. Put an adapter ring onto the warmer’s body to limit the amount of escaping vapor.

6. Plug the power cord into the power socket.

7. Press the power button . Remember! Never turn on the warmer when there is no water in it.

8. Press the function button selecting the “fast heating” option with the icon .

9. Please note that hot vapor is emitted while the warmer is operating. Be very careful as it can cause severe burns. Avoid contact with the skin. Keep your face and hands at a safe distance and do not place them above the device while it is in use. To avoid the possibility of burns, never move or carry the warmer while it is working.

10. After the water evaporates, the warmer switches off automatically, signaling the end of the cycle with a Dee-Dee-Dee” sound (after about 8 minutes). To stop the warmer during the cycle, press the button to turn off the warmer, and then disconnect it from the power socket.

11. Wait a few minutes for the disinfected items and the warmer to cool down. Always use a cloth when removing a bottle. When removing small items, lift them together with the basket to avoid the possibility of burns, and tip them onto a clean towel.

• Warning! Do not touch the body or the heating chamber, because they are hot.

Important!

• DO NOT place electrical appliances or components containing metal inside the warmer due to the risk of damage.
• DO NOT use bleaches or chemical solutions/disinfectant tablets in the warmer or for the products that will be scalded in it.
• Always follow the cleaning instructions for items that will be placed in the appliance.

DESCALING

• After some period of use, as a result of the heating process, limescale may build up on the heating chamber (depending on the water quality).
• The limescale should be removed regularly to ensure proper operation of the warmer. The heating and steaming time is greatly prolonged if a lot of limescale collects in the heating chamber.
• Before removing the limescale, the warmer should be disconnected from the power supply and allowed to cool fully.
• To remove the limescale, add 100 ml of warm water and 50 ml of vinegar to the heating chamber.
• This solution should be left inside the warmer for up to 30 minutes. Any longer time may cause damage to the device.
• When the limescale dissolves, pour out the solution and rinse the heating chamber with clean water.

Warning!

• Do not use any commonly available descalers, especially those containing citric acid.
• Never turn the warmer on while removing the limescale.
• Failure to follow the correct descaling instructions can cause irreparable damage to the product.
• The use of mineral drinking water will accelerate the process of limescale deposition in the heating chamber.
• Use pre-boiled/demineralized water, as it prevents limescale build-up in the heating chamber.
• The presence of limescale on the heating chamber is not subject to the warranty.

CLEANING AND STORAGE

1. Maintenance of the warmer, other than cleaning or limescale removal, is not required.
2. After use, do not forget to pour out the water.
3. Do not store the device filled with water.
4. If the warmer is not used, do not put bottles or other objects inside the heating chamber.
5. Unplug from the socket when not in use, and always before cleaning.
6. Clean the body and the inside of the warmer with a soft cloth or sponge, then dry it with a clean cloth or a paper towel.
7. NEVER put the warmer in water or wash it under running water.
8. Do not place the warmer in the dishwasher.
9. For cleaning the warmer use only clean water, to prevent stains from forming.
10. Do not use abrasive sponges, scouring agents, or any caustic substances or chemicals for cleaning.
11. Keep the warmer away from direct sunlight, sharp edges and other hazards.

• E-mail: iod@canpolbabies.com

Documents / Resources

| CANPOL BABIES 77-053 4 in 1 Bottle Warmer and Sterilizer with Thermostat [pdf] User Manual
77-053 4 in 1 Bottle Warmer and Sterilizer with Thermostat, 77-053, 4 in 1 Bottle Warmer and Sterilizer with Thermostat, Bottle Warmer and Sterilizer with Thermostat, Warmer and Sterilizer with Thermostat, and Sterilizer with Thermostat, Sterilizer with Thermostat, with Thermostat, Thermostat
---|---

References

• Successful Start in Motherhood | Canpol babies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>