dahua M.2 PCIe SSD Solid State Drive User Guide
- June 9, 2024
- Dahua
Table of Contents
Solid State Drive
Quick Start Guide
Important Safeguards and Warnings
This section introduces the proper way of using the SSD, and danger and property damage preventions. Before using the SSD, read this manual carefully. Follow the instructions and keep this manual properly.
Operating Requirements
- Do not place or install the product in a place exposed to sunlight or near the heat source.
- Keep the product installed horizontally or on a stable place to prevent it from faling.
- Do not drop or splash liquid onto the product, and make sure that there is no object filled with liquid on the product to prevent liquid from flowing into the product.
- Instal the product in a well-ventilated place, and do not block the ventilation of the product.
- Operate the product within the rated range of power input and output.
- Do ot disassemble the product.
- Transport, use and store the product under the allowed humidity and temperature conditions.
Structure
1.1 Packing List
When receiving the product, check whether there is obvious damage to the
packing box. Unpack the box and check whether the components are complete
against the packing list.
1.1.1 With Heatsink
Table 1-1 Packing list
| Name | Quantity | Name | Quantity |
|---|---|---|---|
| Solid state drive | 1 | CCS002-01-M.2 cooling plate | 1 |
| Thermal pad | 1 | M2 x 3 cross flat tail nickel plated screw | 1 |
| Quick Start Guide | 1 | Legal and Regulatory Information | 1 |
1.1.2 Without Heatsink
Table 1.2 Packing list
| Name | Quantity | Name | Quantity |
|---|---|---|---|
| Solid state drive | 1 | M2 x 3 cross flat tail nickel plated screw | 1 |
| Quick Start Guide | 1 | Legal and Regulatory Information | 1 |
1.2 Dimensions:
‘The dimensions of the SSD itselfis 80.0 mm x 22.0 mm x 2.2 mm(315″ x 087″ x
0.08″). The dimensions after installing cooling plate s 80.0 mm x 23.0 mm x 48
mm (3.15″ x 091″ x0.19′).
1.3 Port
The SSD adopts M.2 port to directly connect to the M2 port on computers and
other devices.
Installation
2.1 Preparation
Table 2.1 Environment requirements
| Installation Environment | Description |
|---|---|
| Operating Temperature | 0°C to +70°C (+32°F to +158°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Operating Humidity | 5%-95% (non-condensing) |
2.2 Fixing SSD
CAUTION
- Make sure that your device has enough space before installing cooling plate.
- Install the cooling plate with even forces to avoid damage to the PCB board and other components of the SSD.
Fix the SSD and cooling plate by following the steps below before using the SSD.
2.3 Installing SSD
Insert the SSD to the M.2 port on your device, and fix it with a screw.
Appendix 1 Precautions for Use
- Before installing, make sure that your device mainboard supports the SSD, and that there are enough M.2 slots for the SSD.
- Make sure that your device has enough space before installing cooling plate. Install the cooling plate with even forces to avoid damage to the PCB board and other components of the SSD.
- Make sure that the M2 slot on your device mainboard supports PCle3.0 bandwidth; otherwise the installed SSD will notachieve the desired performance.
- Because NVMe protocol is a new technology, Windows 7 system does not come with the corresponding driver. After you install the NVMe SSD, the system might not be able to recognize it It is recommended that you use Windows 8.1 and later, or Linux.
- If you stil want to use Windows 7, it is recommended that you download the standard version of the NVMe driver from the network.
- When the device is running, do not plug or unplug the SSD with power on; otherwise the SSD might be damaged, which cannot be covered under the warranty.
ENABLING A SAFER SOCIETY AND SMARTER LIVING.
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Address: No.1199 Bin’an Road, Binjiang District, Hangzhou, P. R. China
Website:www.dahuasecurity.com | Postcode:
310053
Email:[email protected] | Fax:
+86-571-87688815 | Tel: +86-571-87688883