TACTICAL Base Plug Wireless Charger User Guide
- June 4, 2024
- TACTICAL
Table of Contents
TACTICAL Base Plug Wireless Charger
Basic description
The Tactical Base Plug Wireless charger is designed to charge phones equipped
with a wireless charging function as well as headphones with this
function.
Connection
Connect the USB-C connector of the power cable to the wireless
charger and the other end of the cable with the USB connector to the
power supply. For full efficiency of the charger, the power supply should
have the following parameters: 12V/ 2A, 9V / 2A, 5V/2A
Charging
Place the phone or headset on the charger, charging will start automatically. The phone will be charged with a maximum power of 15W, the indication of the phone when charging is the same as the indication when charging with a cable. Charging the phone and headphones is possible even if the phone is in a protective cover. The maximum thickness of the back of the cover is 8mm to start charging. Charging efficiency is> 73% The charger is equipped with foreign body detection, for example, if you accidentally place keys on it, it will automatically turn off to prevent it from overheating. Each phone has an induction coil in a different place ideally place the phone in the Center of the charger
LED Indication
- when you put the phone or headphones on, the GREEN LED lights up
- when fully charged, the LED indication changes to blue light only phones with support show full charge
Specifications
- Cable length: 1m
- Connector: USB-C
- USB-C input: DC 5V/2A, 9V/ 2A, 12V/ 2A
- Output: DC 5V/ 5W 9V/ 75W 12V/15W
- Maximum power: 15W
- Fast charging: Yes, Qi
- Charging distance: <8mm
- Dimensions: 100mm x 6mm
- Detection of a foreign object
- Material: ABS, silicone
Package Contents
- Wireless charger
- USB-C 1m cable
Warning
Do not store or use the charger in areas with high humidity. Do not use it
outdoors. Do not use it in high-temperature areas or near heat sources.
The product is covered by the warranty in accordance with the legal
regulations in force in the countries where it is sold.
Declaration of conformity simplified version
The manufacturer, Shenzen Soke Electronics, declares that this product is in
compliance, complies with Directive 2014/53 / EU and has been issued with the
EU Declaration of Conformity, which is available for inspection at:
www.tacticalproducts.eu/downloads/certificates/tacticalLbase_plug_wireles_15w
Importer
Bakr s.r.o.
Trebohostická 564/9
Praha 10 10000
Czech Republic
Manufacturer
Soke Electronic Co., Ltd, 1st floor, A2 building,
Zhimei Part, Fuyong, Bao’an district, China