TACTICAL 6478627 Vision Strike Pods User Guide TACTICAL VISION STRIKE PODS

: October 27, 2023
: TACTICAL

Table of Contents

TACTICAL VISION STRIKE PODS

TACTICAL
Designed in the Czech Republic

TACTICAL VISION STRIKEPODS

USER GUIDE

TACTICAL VISION STRIKE PODS

User manual

Tactical Vision StrikePods , wireless earbuds with intelligent ambient noise cancellation and touch control. 4 hours of listening to your favorite songs on a single charge or 100 hours with the charging case.

PRODUCT DESCRIPTION

USB-C port for charging
opening
headphone charging contacts
touch surface
LED indication of the handset
LED indication of the charging case
charging contacts in the housing

SPECIFICATIONS

Specifications Bluetooth v5.3	Frequency range 20Hz – 20kHz
Headphone battery capacity 33mAh	Supported formats and codecs
320mAh case battery capacity	A2DP / AVCTP / AVDTP / AVRCP /
Wireless range up to 10m	HTP / GAP / GATT
Endurance on one charge up to 4 hours	LED indication
Charging time up to 60 minutes	USB-C charging port
Standby time up to 100 hours	Touch control

ON/OFF

The headphones turn on automatically once taken out from the case. They can also be switched on manually by holding down the right touchpad for 3 seconds. To turn off the headphones, put them back in the case or hold the left touch pad for 6 seconds.

PAIRING

Headphones automatically switch to pairing mode when first taken out from the case. Turn on Bluetooth on your device and search for -141E-76″ and select pairing. Next time you remove them from the case, the headset automatically connects to the paired device.

WEARING

Insert each earbud into your ear and adjust as needed in order to fit perfectly.

TOUCH CONTROL

For right and left handset
Double touch – Play / Pause / answer or end a call
Hold for 2s – reject call / activate voice assistant
3 touches on the right earpiece – next song
3 touches on the left handset – previous song
1 touch right handset – volume +
1 touch left handset – volume –

CHARGING

First, remove the protective film from the headphone contacts and place the headphones in the case. Connect the charging cable to the USB-C charging port on the bottom of the case. The LED indication starts to indicate while charging. As soon as the LED indicator goes off, both the headphones and the case are charged. We recommend that you fully charge the handset before using it for the first time

PACKAGE CONTENTS

Charging case
Headphones
USB-C charging cable
Manual

CAUSION

Do not disassemble or damage the headphones or the case. Do not expose the headphones to temperatures outside the range of 0-45 ° C Do not look directly at the LED indicators up close. The headphones do not belong in the hands of small children. Do not use headphones during thunderstorms. Only clean the headphones with a slightly damp cloth, do not use solvents or other cleaning agents. Use only the supplied charging cable and a certified adapter for charging.

Manufacturer: MOMIX Technology, Room 601, Building 617, Bagualing Industrial Zone, Bagua 1st Road, Yuanling Street, Futian District, Shenzhen, China

Importer: Bakr s.r.o., Tfebohosticko 564/9,100 00, Praha, Czech Republic

Declaration of Conformity: The manufacturer Momix Technology, declares that this product is in conformity, complies with Directive 2014/53 / EU and has been issued an EU Declaration of Conformity, which is available for inspection at: Mtps://tocticalproductssu/docifproductstracticalStricePods_VaionjEUDecloration_ofConformity.pdf

TACTICAL
Designed in the Czech Republic

TOO DURABLE TO RESIST