VIETA VM-BS36 Easy 2 Speaker User Manual
- June 6, 2024
- VIETA
Table of Contents
Easy 2 Speaker
Ref. VM-BS36
LetMeRepair Spain
User Manual
www.vietapro.com
Problems with your product? Contact us at Email:
[email protected]
Phone: 952 179 479
Thank you for purchasing the outdoor Bluetooth Easy 2 speaker VM-B536. To
ensure correct operation, please read this user manual carefully before
operation.
This product has been designed and developed under the professional standards
of VIETA PRO, which was founded by the Brothers in 1954. Since then, Vieta has
accumulated more than 60 years of history under the motto The avocation and
Respect for Art of Music “, which has motivated all his projects, thus
achieving a privileged place in the electronics market based on constant
effort and generous doses of passion.
The VIETA PRO models are based on the benefits of professional sound, where
the standards of quality, durability, and sound are above the commercial
products of consumer electronics. Developed by the prestigious engineer “Jordi
Hernandez”, with more than 40 years of experience in the sector and who has
been designated as “expert hearing of vieta” since 2002. Models that have been
built with the most precise components for the purpose to be able to offer and
develop the purity and uniqueness that characterizes the VIETA PRO sound.
Important Safety Instructions
- Do not use the speaker in special cold and hot environments.
- Please avoid the speaker dropping or hitting with a hard object, it may cause other hardware damage.
- Take care when charging the speaker, excessive prolonged charging will damage the battery lifetime. Charge the speaker to full capacity when using it for the first time.
- When the battery is low, the indicator light will flash, and the voice prompt “battery low”, please charge the speaker in time.
- Always disconnect the unit from the mains power supply before connecting/disconnecting other devices or moving the unit.
- Unplug the unit from the mains power socket during a lightning storm.
- If do not use this speaker for a long time, please charge at least once within one month, in order to prevent the lithium battery from causing and damaging because of excessive consumption.
Technical Data
Bluetooth Version: ATS2819 V5.0
Speaker Output: 20W (10W x 2)
Impedance: 40
Speaker Driver: 40mm x 2 + passive radiator x 1
Aux In: 3.5mm
Waterproof Level: IPX7
Frequency Response: 80Hz-20KHz FM
Frequency: 87.5MHz — 108MHz
SNR: >75dB
Built-in Battery: 3.6 V 2000mAh
Input: DC 5V 2A
Charging time: 3.5 hours
Working hours: 12hours at 50% volume
Weight: 321g Dimension: 084 mm x 95 mm
Features
-
Bluetooth Music and Mobile Hands-free Function Bluetooth 5.0 stereo music playing, supports mobile hands-free function.
-
Support TWS Function True Wireless Stereo (two same speakers can be paired and play music at the same time)
-
Aux-in Work as the external speaker by connecting to the audio source of computer, mobile, PSP/MP3/MP4, etc.
-
USB Flash Disk Music playing Support MP3/WAV/WMA music format, capacity up to 32G
-
FM Radio With built-in antenna for better signal reception.
-
Voice guide
The speaker will prompt the working mode and status for easy operation. -
Voice Assistant
Experience a smart lifestyle on the speaker via the mobile’s voice assistance. -
Water-resistance at IPX7
-
Top passive radiators with ambient lighting;
-
With Type C Charging Jack
Package Contents
Bluetooth Speaker, Type C USB Cable, Aux-in Cable, User Manual
Slot and buttons
Altavoz Bluetooth, cable USB tipo C, Aux in Cable,
- + 1. Volume+ / Forward
- – Volume- / Backward Ci
- TWS Button
- 0 Battery indicator kA
- M Mode button / Voice assistant button
- Power button; Play/Pause/Mute button
- Aux in jack
- USB flash disk port
- Type C DC 5V charging jack
Operation Instructions
-
Power on/off
Long press the C31 button and hold for default working mode is Bluetooth mode. -
Bluetooth
- Power on the speaker and enter to Bluetooth mode, or you can short press the M button to switch to Bluetooth mode. The Working status indicator light will twinkle in green.
- Turn on the Bluetooth of your phone, search for nearby devices. The Vieta Pro Easy 2 will be found on your mobile pairing list, please connect it. When connected, the speaker will prompt “Connected” and the operation indicator will stop twinkling and turn to solid green.
- Turn on the mobile or other devices’ music player, the speaker will play the selected music
- The speaker will pair with the latest used Bluetooth device automatically when devices are in the paring range. Long press the button to disconnect the current Bluetooth connection.
-
Mobile Hands-free phone calls(Under Bluetooth Mode)
Short press the button to answer/hand off the phone call. Short press + or — button to switch the call between the speaker and the phone. -
TWS(True Wireless Stereo) function (only works in Bluetooth and Aux-In mode)
a) Power on 2pcs VM-BS36 (ensure both speakers are in Bluetooth waiting to pair status).
b) Short press the button on either one speaker (only one speaker, no need to press two speakers)to enter the TWS pairing mode. The indicator light will flash in orange and green colors alternately.
c) Once two speakers are paired. The speaker you press, which operation indicator flashing in green is the master speaker. The other one in solid orange is the slave speaker.
d) Use your phone to pair the master speaker VM-BS36 via Bluetooth, and play music on both speakers.
e) TWS function also works at AUX-in mode, please make the TWS pairing first, then plug in the included 3.5mm Aux cable into the master speaker (Please note: the Aux In cable needs to insert into the master speaker). The master speaker will be switched to AUX In mode automatically.
f) Short press the button on either one speaker to disconnect the TWS pairing. Long press the button to clear the TWS pairing memory. -
USB Music Playing
Insert the USB disk into the speaker. Short press the button NO to enter the USB mode, the speaker will prompt “USB mode”, Then the speaker will play the USB music directly. The max USB capacity up to 32G and support the MP3/WMA/WAV music format. -
FM Radio
Press the button M to set the Radio FM mode (the vocal guidance of the speaker will show “FM Radio Mode”).
In FM mode, press and hold RA in order to generate the automatic search and automatically save FM radio stations.
Note: in order to get a good experience when using the FM function. We suggest auto-scan and saving the radio FM stations when used in the new environment. -
Aux in Mode
Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4, mobile phone). the speaker will prompt “Aux-in mode”. The speaker will play the music from the audio source.
Please Note: The track switch button of the speaker does not work under Aux-in mode, you can only switch soundtrack from the audio source device. -
Calling out the mobile’s voice assistant
Under Bluetooth pairing status, long press and hold the button NI for 2 seconds to call out the mobile’s voice assistant function on the speaker.
Please Note: Due to the different compatibility on different brands’ android systems, the experience will be different. -
Button functions in Bluetooth/USB/FM/Aux-In mode
| Long press to power on/off the speaker; Short press to play/pause/mute
---|---
+
| Short press for next track/Channel
Long press to increase the volume
Double short press to switch to the next folder of the USB music playing
M
| Short press to change the working mode
Long press to calling out the mobiles voice assistant
–| Short press for previous track/Channel
Long press to decrease the volume
Double short press to switch to the previous folder of the USB music playing
| Short press to enter/exit the TWS function
Long press to clear the TWS/Bluetooth pairing memory
10. Light theme
Double short press the CD button can change/turn on / turn off the light theme
on the passive radiator. There are three light themes: music rhythm light-
Breathing candlelight—Gradient changing light.
-
Intelligent power saving function
The speaker will be automatically powered off in the below cases: (1) Under Bluetooth mode, the speaker is waiting to pair for more than 20 minutes (2) Under USB mode / FM mode / Aux-In mode, if press the button to pause/mute for more than 20minutes.
Note: Please long press button again to power on the speaker -
Charging
When a speaker with low battery capacity, the speaker will prompt “battery low”, and the volume will be automatically reduced to 60%. Please charge the battery via included USB cable immediately. During charging, the power indicator will keep flashing. When fully charged, the power indicator will stay solid.
Note: Please use a good-quality adaptor to charge the speaker. We suggest using the adaptor specification at 5V/2A When the speaker with low battery capacity, please charge the speaker immediately
Troubleshooting
| No Power | Recharge the speaker. |
|---|---|
| Can not charging | Change another USB cable to charge it, after changing the |
USB cable have the same problem, you can connect our service team to solve it.
Cannot find the paring ID
“VM-BS36” on the Bluetooth device| Ensure the Bluetooth function is activated
on your Bluetooth device.
If the speaker is pairing with another device, please try to long-press the
button do disconnect the current pairing.
Make sure that your Bluetooth device is within the effective operational
range.
Declaration of Conformity
Issuers name: FRAMASON AUDIO S.A
Address: Av. de Pau CasaIs 7, Entresuelo 2- 08021 Barcelona (Espana)
Tel: +34 93 1162491
CIF: A62829841
We declare under our own exclusive responsibility that the product:
- Description: Bluetooth Speaker
- Brand: Vieta Pro
- Model: VM-BS36
- Manufacturer: FREEMASON AUDIO S.A
- Manufacturing country: China referred to in this declaration is in compliance with the essential norms and standards
EN 62368-1:2014 + A11:2017
EN 301 489-1 V2.2.0 (2017-03)
EN 301 469-17 V3.2.0 (2017-03)
EN 55032:2015
EN 55035:2017
EN 300 328 V2.2.0 (2017-11)
EN 303 345 V1.1.7 (2017-03)
EN 62311:2008 in conformity with the provisions of the Directive 2014/53/EU of
the European Parliament and of the Council of 16th April 2014.
Barcelona 1 Marzo de 2019
Carlos Alberdi
Product Manager
www.vietapro.com