VIETA VHP-TW28 Bluetooth Portable Earphone User Manual

VIETA VHP-TW28 Bluetooth Portable Earphone

Thank you for purchasing the outdoor Bluetooth It Plus earphones VHP-TW28.
To ensure correct operation, please read this user manual carefully before operation.

This product has been designed and developed under the professional standards of VIETA PRO, which was founded by the Brothers in 1954. Since then, Vieta has accumulated more than 60 years of history under the motto “The avocation and Respect for Art of Music”, which has motivated all his projects, thus achieving a privileged place in the electronics market based on constant effort and generous doses of passion.

The VIETA PRO models are based on the benefits of professional sound, where the standards of quality, durability, and sound are above the commercial products of consumer electronics. Developed by the prestigious engineer “Jordi Hernández”, with more than 40 years of experience in the sector and who has been designated as “expert hearing of vieta” since 2002. Models that have been built with the most precise components for the purpose to be able to offer and develop the purity and uniqueness that characterizes the VIETA PRO sound.

Important Safety Instructions

Parameter

• Model: Vieta Pro It Plus
• Bluetooth version: Realtek V5.0
• Bluetooth distance: 10M
• Charging case battery: 400mAh
• Earphone battery: 40mAh
• Playback time: 4-5h
• Standby time: more than 200h
• Charging time: 1-2h
• Charging box voltage: DC 5V
• Supported cell phone systems: IOS , Android

Key Definition

• Power on
  When the earphones are removed from the case and they will automatically turn on and sync to each other

• Power off
  The earphones will power off directly when you put them back into the charging case

• Answer call
  One time touch L side or R side

• End call / Refuse the incoming calls
  Long Touch 2seg on L side or R side
  “Interrupt dialout calls”
  One time touch L side or R side

• Play/Pause
  One time touch L side or R side

• Increase Volume
  Long touch R side while playting music

• Decrease Volume
  Long touch L side while playting music

• Next Song
  Double Touch R side

• Previous Song
  Double touch L side

• Wake Up Voice Assistant
  One time touch L side

Charging Mode

Putting the earphone in and out of the battery compartment

When the earphone is placed into the charging case, it will turn off automatically and start charging. The red indicator will be on and turned off after charging is finished.

Charging chase

The LEDs of the case will turn on successively (white light). The four white lights are on after being fully charged; when the charging case is disconnected, the power indicator light will go out after

Low battery

When the battery voltage is lower than 3.3V, there will be a prompt tone of “battery low，please charge””, and the red light will flash for 20s once. When the battery voltage is lower than 3.0V, it will be shut down

Battery display
After connecting the ios device, you can see the Bluetooth power display on the ios device

Single Earphone
Pairing mode
The earbuds can turn on automatically to enter the single ear mode if you just take one earbud out from the charging case.
The blue/red light keep flashing.

TWS pairing mode

When the earphones are removed from the case and they will automatically turn on and sync to each other
Mobile Phone Bluetooth Connection
Open your bluetooth device and search the name : Vieta Pro It Plus and connected

Reconnect to Bluetooth
The left and right ears will automatically reconnect after turning on, and the main ear will also reconnect to the phone;
After disconnecting the earbuds from the mobile phone, you can reconnect the earbuds from the mobile phone; after the Bluetooth is out of the working range, it will auto-matically reconnect if back to the working area within 5 minutes

Remark

1. Bluetooth pairing name : Vieta Pro It Plus
2. When the music is played, Place it into the charging box. At the moment, The earbuds disconnects from the mobile phone. The earbuds switches off When the cover of charging box is opened again, it powers on automatically for connection.
3. Connect the mobile phone automatically after power on. If connection cannot be made automatically, Press Power key to connect.
4. If the earbuds cann’t connect to the mobile phone, reboot and connect again
5. Please always have a 5V charger

WARNING

• Away from high temperature
• Away from open flames
• Away from water
• Please do not drop

Declaration of conformity

Issuer’s name: FRAMASON AUDIO S.A
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (España) Tel: +34 93 1162491
CIF: A62829841
We declare under our own exclusive responsibility that the product:

• Description: True Wireless Earphones
• Brand: Vieta Pro
• Model: VHP-TW28
• Manufacturer: FRAMASON AUDIO S.A
• Manufacturing country: China referred to in this declaration is in compliance with the essential norms and standards

EN 62368-1:2014 + A11:2017
EN 301 489-1 V2.2.0 (2017-03)
EN 301 469-17 V3.2.0 (2017-03)
EN 55032:2015
EN 55035:2017
EN 300 328 V2.2.0 (2017-11)
EN 303 345 V1.1.7 (2017-03)
EN 62311:2008
in conformity with the provisions of the Directive 2014/53/EU of the European Parliament and of the Council of 16th April 2014.

www.vietapro.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>