DOYLE 10 Inch Professional Rivet Nut Setter Kit Owner’s Manual
- June 6, 2024
- DOYLE
Table of Contents
10 Inch Professional Rivet Nut Setter Kit
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance, and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if the product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
Visit our website at:
http://www.harborfreight.com
Email our technical support at:
productsupport@harborfreight.com
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please call
1-888-866-5797 as soon as possible.
© Copyright 2020 by Harbor Freight Tools ®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, the actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
WARNING
Read this material before using this product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
Specifications
Compatible Nut Rivets 10-24, 1/4-20, 5/16-18, M5, M6 and M8
IMPORTANT SAFETY INFORMATION
- Set up only according to these instructions. Improper setup can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during setup and use.
- Keep work area clean and well-lit.
- Keep bystanders out of the area during setup and use.
- Do not set up or use when tired or when under the influence of alcohol, drugs, or medication.
- This product is not a toy. Do not allow children to play with this item.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Mandrel Installation
1. Remove Nut using Wrench.
2. Remove Mandrel.
3. Install the desired Mandrel that matches the rivet that will be used. Secure with the matching Nut.
Rivet Installation
1. Open Handles and thread rivet onto Mandrel.
2. Insert rivet through predrilled hole.
3. Squeeze Handles together to secure the rivet.
4. Twist Riveter down to remove it.
Record Serial Number Here:
Note : If the product has no serial number, record the month and year of
purchase instead.
Note Replacement parts not available. Reference UPC 193175432124.
Limited Lifetime Warranty
Harbor Freight Tools warrants to the original purchaser that this Doyle™
product shall be free from defects in materials and workmanship for its useful
life.
If your Doyle™ product does not perform in accordance with this warranty,
Harbor Freight Tools will, at its option and expense, repair or replace (or
elect to refund the purchase price if we cannot repair or replace), your
Doyle™ product, which shall be your sole and exclusive remedy. To obtain
warranty service, Doyle™ products must be returned with proof of purchase to a
Harbor Freight Tools retail store or returned by mail after contacting Harbor
Freight Tools Product Support at
1-888-866-5797 and receiving a return
authorization.
This warranty excludes normal wear and tear and does not apply to products
subjected to misuse, use or operation other than for the intended purpose or
not in accordance with the product manual, abuse, accident, modification or
alteration, unauthorized repair, improper storage, neglect, or lack of
maintenance. This warranty is in lieu of all other warranties. Harbor Freight
Tools is not liable for incidental, indirect, special, consequential, or
punitive damages or costs arising from the use of this product. Some states do
not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to
state.
Doyle is a trademark of Harbor Freight Tools. All other brands and trade names
are the property of their respective owners.
26541 Agoura Road
• Calabasas, CA 91302
• 1-888-866-5797