camry CR 4444 Coffee Grinder with Safety Lid User Manual
- June 6, 2024
- camry
Table of Contents
camry CR 4444 Coffee Grinder with Safety Lid
SAFETY INSTRUCTIONS
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE. PLEASE READ
CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter or touch hot surfaces
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
- In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
- Do not insert fingers or any other objects into blender’s cup when the blender is on.
- In order to avoid injuries handle the blades carefully.
- Watch out for long hair, scarves, neckties hanging above the cup and operating components of device.
- For safety reasons use only original accessories and spare parts intended for particular blender type, available at authorized service center.
- Handle the blades with extreme care while disassembling accessories. The blades can cause cuts.
- Do not wash any blender parts in dishwashers.
- Change the accessories only when the device is switched off. Disconnect the device from the power.
- Do not put any products other than food and liquids in the blender cup. Do not put hot products in the cup.
- The device is not suitable for whipping egg whites or kneading dough.
- Don’t use aggressive detergents to clean the housing, as it may remove the informational graphic symbols such as: scale, signs, safety marks, etc.
- Do not start the empty mixing cup, without product inside.
- MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 60 SECONDS. After 60 seconds of continuous operation stop the device and wait couple of minutes before restarting.
- Do not pour hot liquids (above 60 degrees Celsius) into the blender.
- If the blades are blocked, always disconnect the power cable plug from the power socket before removing the blocking elements from the blender cup.
- Do not move the appliance during operation.
DESCRIPTION OF THE DEVICE
- Transparent cup
- Grinding chamber lid
- Steel cup
- Safety Switch
- Main device
DEVICE OPERATION
Before first use
- Remove all stickers and foils from the device, cup and lid of the device.
- Wash the device in accordance with the “Cleaning and maintenance” section.
NOTE: Do not allow the grinder to operate continuously for more than 60 seconds.
User manual
- Insert the steel cup into the top of the device and turn it clockwise to lock it in the correct position.
- If using the cup, weigh the beans, not more than 75 g. Place the beans inside the cup.
- Place the transparent grinding chamber lid on the steel cup and press to ensure effective sealing.
- Place the transparent cup on the device with the indentation facing down. Remember that the device has a safety switch based on a transparent cup (Safety Switch 4). Unless the safety switches are pressed in, the device will not turn on.
- Connect the device to the power supply with the power cord. 6. To turn on the device, push the transparent cup down.
- The device will work until you lift your hand from the transparent cup. When you raise your hand from the transparent cup it will stop.
SECURITY
Always check that the transparent cup and steel cup are correctly positioned in the grinder body. If not, the grinder will not work properly. When you remove the cover from the machine, it will stop working. If the grinder is overloaded, the engine will stop working. Wait about 45 minutes for the engine to cool down.
CLEANING AND MAINTENANCE
Make sure the grinder is disconnected from the power supply.
- Wash the bowls, lids and blades in water with washing up liquid. To thoroughly wash the cup, pour some water with dishwashing liquid into it, connect the mixer to the power supply and turn it on for a short time in pulse mode. Then pour out the water, rinse and dry thoroughly.
- Clean the colored body (5) with a damp cloth and then wipe dry.
NOTE: Never immerse the grinder body (5) in water or other liquids.
WARNING: Do not wash any parts of the grinder in dishwashers.
TECHNICAL DATA
Nominal power: 200 W.
Maximum power: 400 W.
Voltage: 220-240 V ~ 50/60 Hz
Maximum continuous working time: 60 seconds
Minimum break time between work cycles: 3 minutes
To
protect your environment: please separate carton boxes and plastic bags and
dispose them in corresponding waste bins. Used appliance should be delivered
to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
Documents / Resources
|
camry CR 4444 Coffee Grinder with Safety
Lid
[pdf] User Manual
CR 4444, Coffee Grinder with Safety Lid, CR 4444 Coffee Grinder with Safety
Lid, Coffee Grinder, Grinder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>