camry CR 7320 107 cm Tower Fan User Manual
- June 6, 2024
- camry
Table of Contents
Premium
CR 7320
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240 V ~ 50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
-
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let the cord hang over the edge of a counter or touch hot surfaces.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
-
Protect the motor part of the unit from immersion in water.
-
Use only the original mounting hardware provided.
-
Switch on the device only after complete installation. The partially assembled and commissioned device does not ensure safe use and proper operation.
CAUTION: DO NOT TURN ON THE FAN WITHOUT FRONT AND REAR COVERS. -
Set up the fan away from curtains, curtains, or other objects that may be pulled in by the working fan.
-
Do not insert any objects into the cover of the fan. Otherwise, it may lead to personal injury or damage to the device.
ASSEMBLING (Picture 1)
Step 1: Adjust the assembled poles with corresponding holes, and insert the
poles into the holes to join the base in one round shape. (Picture 1.1)
Step 2: Adjust assembled base to screw poles of the fan body. (Picture 1.2)
Step 3: After proper connection of the body and base, screw the screws into
the screw’s holes in the base, remember to put the power cord into the base’s
groove. (Picture 1.3)
Step 4: Stand the fan on a flat surface. (Picture 1.4)
Device description (Picture 2)
- Control Panel
- Housing
- Fragrance drawer
- Base
- Handle for carry
- Air inlet grill
- Air outlet grille
FUNCTIONS & OPERATION (Picture 3)
The device is operated manually by directly pressing the control panel buttons or by using the remote control as follows:
-
After assembling is completed, the plug-in mains the device at first.
-
Push the button (A) to start and stop the fan.
-
Push the button (B) to select fan speed of:
B1 – slow airflow
B2 – middle airflow -
Push-button (E) to select proper operation time from 1 hour to 7 hours.
-
Push the button (C) to start the negative ion function. Push it again to stop the function.
-
Push the button (D) to oscillate the fan column horizontally in a radius of 70°. Push it again to stop the function. B3 – fast airflow
Remove stuff between the remote control and the device. If the remote control still does not work, reduce the intensity of the light sources because they can interfere with the infrared signal transmitted by the remote control. The remote control requires the “CR2025” battery to be replaced.
THE USAGE OF FRAGRANCE BOX (Picture 2)
In the front of the fan, there is a small drawer (fragrance box) below the
vent. There is a sponge inside the drawer. Take out the drawer and soak my
favorite fragrance on the sponge if you would like the wind to blow with
fragrance.
CLEANING AND MAINTENANCE
CAUTION: Do not allow the fan’s motor part or any buttons to get wet.
- Before cleaning remove the plug from the electrical socket.
- To clean housing gently wipe it with a damp cloth, without detergents. Wipe dry
- Store the fan in a dry place.
Technical Data:
Power: 60 W
Voltage: 220-240V ~ 50 Hz
Maximum Power: 120W
Noice: ≤ 55dB (A)
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
Premium