Avantree BTHS-TWS116 True Wireless Earphones for TV User Manual
- June 6, 2024
- Avantree
Table of Contents
Avantree BTHS-TWS116 True Wireless Earphones for TV
What’s in the box
How to wear
Place the earhook part horizontally along the top edge of your ear (fig. 1), then slide it back and downwards (fig. 2) until the earhook is pointing down and the earpiece rests gently against your outer ear (fig. 3).
Product overview & Basic operations
| Play / pause | Click ① once on either side |
|---|---|
| Volume up / down | Press & hold ① on the RIGHT / LEFT earphone |
| Previous / next track | Click ① twice on the RIGHT / LEFT earphone |
| Answer/end a call | Click ① once on either side |
| Activate Siri / Google Assistant (Phone dependent) | Click ① three times |
on either side
Earphones LED status
| Pairing mode | Either LED ② fiashes BLUE and RED alternately |
|---|---|
| Connected | Both LEDs ② fiash BLUE once every 8 seconds |
Charging case LED status
| Battery low | ③ Steady BLUE |
|---|---|
| Charging | ③ Steady RED |
| Fully charged | ③ Turns off |
Connecting to a Phone / Tablet / TV
For first time use, please put both earphones onto the charging case then
- Remove BOTH earphones to turn them ON
- Wait for the LED on either earphone to flash BLUE & RED alternately to enter PAIRING MODE
- Search & select Avantree TWS116 from the Bluetooth menu on your device to connect. If you are using a Bluetooth transmitter, please ensure your transmitter is also in PAIRING MODE (please refer to your user manual)
- Once connected, both earphone LEDs will flash once every 8 seconds
Notes:
- If your TV is not Bluetooth enabled, you will need to buy a separate Bluetooth transmitter (we recommend either the Avantree Oasis (Plus) / Audikast)
- If you use your TV’s optical audio output, you may need to set your TV audio format to PCM (please refer to your transmitter’s user manual)
Reconnecting
The earphones will auto-reconnect to your last paired device the next time you remove them from the case. If not, please select Avantree TWS116 on your device to manually reconnect.
Note: To connect with another device, please turn off Bluetooth on the previously connected device
User Tips and troubleshooting
Use one earphone only
Either side can be used separately as a mono earphone.
- Make sure you have previously connected the earphones with your phone as a TWS pair first
- For subsequent use, just remove either earphone from the case and it will auto-reconnect to your device
No sound when used with a Bluetooth transmitter?
-
Make sure that the earphones and the transmitter are connected.
You should hear “connected” from the earphones and the earphone LED indicators should flash once every 8 seconds. -
TV settings – Change the Digital sound format to PCM (or STEREO) ; If you see DOLBY in the TV Settings menu, turn it OFF.
Check out this link for detailed instructions and other Troubleshooting tips https://avantree.com/product-support/BTHS-TWS116-BLK
Scan for FAQ
Documents / Resources
|
Avantree BTHS-TWS116 True Wireless Earphones for
TV
[pdf] User Manual
BTHS-TWS116, True Wireless Earphones for TV, TWS116
---|---
|
Avantree BTHS-TWS116 True Wireless Earphones for
TV
[pdf] User Manual
BTHS-TWS116, BTHSTWS116, WJ5-BTHS-TWS116, WJ5BTHSTWS116, BTHS-TWS116 True
Wireless Earphones for TV, BTHS-TWS116, True Wireless Earphones for TV
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>