JLab 008-07-0337 JBuds Air ANC Earbuds User Guide
- June 6, 2024
- JLab
Table of Contents
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole
discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or
visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates | How-to tips
FAQs & more
FIRST TIME SETUP
AUTO-CONNECTING EARBUDS
Press and hold both buttons 3+ seconds to power ON.
One earbud blinks blue/white indicating ready to pair to your device.
CONNECTING TO BLUETOOTH
Select “JLab JBuds Air ANC” in your device settings.
Voice prompt “Bluetooth connected” followed by solid white lights will
indicate you are connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth
from new device.
Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air
ANC” in new device settings to connect.
BUTTON FUNCTIONS
VOLUME DOWN: Single Tap
SIRI (iOS) or “OK GOOGLE”
(ANDROID): Double Tap
BE AWARE / ANC ON / ANC OFF:
Press & hold 1+ sec
TURN ON: Press & hold 3+ sec
CHANGE EQ: Triple Tap
(JBuds Air ANC will cycle 3 EQ settings)| VOLUME UP: Single Tap
ANSWER: Single Tap
HANGUP: Double Tap
REJECT INCOMING CALLS:
Press & hold 1+ sec
PLAY / PAUSE: Double Tap
TRACK FORWARD: Press & hold 1+ sec
TURN ON: Press & hold 3+ sec
CHANGE EQ: Triple Tap
(JBuds Air ANC will cycle 3 EQ settings)
---|---
VOICE PROMPTS
“Ready to Pair”: JBuds Air are ready to pair to Bluetooth device
“Bluetooth Connected”: Earbud is connected to the device
“Battery Full”: 100-80% “Battery Medium”: 80-20%
“Low Battery”: Less than 20%
When power decreases to 10%,
“Low Battery” will play
MUSIC / MOVIE MODE: Press and hold both touch sensors simultaneously 3+
seconds
POWER OFF WITHOUT CHARGING CASE: Turn off your Bluetooth from your device
settings.
The earbuds will then power off after 3 minutes.
CUSTOM EQ3 SOUND MODES
Tap either the right or left earbud 3 times for different EQ settings (JBuds Air ANC will cycle 3 EQ settings).
| |
---|---|---
JLab SIGNATURE
JLab C3™ signature sound with amplified bass and vocals| BALANCED
Even sound with no additional
enhancements| BASS BOOST
Amplified bass and sub-bass
CHARGING EARBUDS
-
Match the corresponding L and R letters on the charging case for proper charging. The earbuds will auto power OFF and start charging.
Blue lights will indicate earbuds are charging and will turn OFF when fully charged. -
Earbuds will auto power ON and reconnect to your device when taken out of the case.
CHARGING CASE
Connect the JBuds Air ANC to the computer or USB 5V 1A (or less) output device. LEDs pulse white when charging and turn solid white when fully charged.
FITTING
Try all the optional Cush Fins and ear tips for best fit and proper seal.
The Cush Fin should be aligned by positioning the contour around the
microphone hole.
TROUBLESHOOTING
NO AUDIO IN ONE EARBUD OR EARBUDS DISCONNECTED (MANUAL RESET)
-
Enter your Bluetooth device settings and forget the JBuds Air ANC.
-
Open the charging case and keep the earbuds inside.
-
On ONE earbud, quickly tap 7x the touch sensor. The light blinks blue 3x then turns off.
Repeat the same steps with another earbud. Quickly tap 7x the touch sensor. The light blinks blue 3 times then turns off. -
Wait 10 seconds and open the charging case. Wait for both of the earbuds to blink blue/white. You are now ready to pair to
your Bluetooth device. Instructional videos at: JLABAUDIO.COM/MANUALS
ECHOES ON CALLS
If you experience microphone echo/call quality with the JBuds Air ANC, make sure the Cush Fin is not blocking the microphone port.
QUICK TIPS
- Either earbud can connect to your device and be used independently. Simply take out the earbud from the charging case and it will auto-connect.
- Choosing the correct ear tip makes a significant improvement in audio quality due to the proper seal for the driver. Try all ear tips for the best results.
WARNING
Fully dry off the earbuds before putting them in the charging case to avoid
any damage to the case. The earbuds are sweat/water
resistant but the case is not.
CAUTIONS
-
Avoid extreme heat, cold, and humidity.
-
Avoid dropping or crushing the earbuds.
-
Wax may build up in the earbud tips, lowering the sound quality.
Carefully remove the wax with a cotton swab or other small tool to improve the sound quality. -
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
-
If you experience regular discomfort while using this product, discontinue use and consult your physician.
-
We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>