IKK SN-RF002 2.4G Smart Light Remote Installation Guide
- June 6, 2024
- IKK
Table of Contents
IKK SN-RF002 2.4G Smart Light Remote Installation Guide
Product Overview
Specifications
- NAME: 2.4G smart light remote
- Model: SN-RF002
- Working voltage: 3V
- Frequency: 2400-2483.5MHz
- Modulation mode GFSK
- Transmission power: 6db
- Remote control distance:20-30 meter
- Battery: 2X AAA 1.5v each
Code match : before any operation for this chandelier, you should decode
your remote to match your lights receiver.
Grouping setting: if your chandelier is combined several light tube or
lamp, you can set different group for each light tube by group setting button.
when you finished whole installation of chandelier, you can start to set group for each light tube(if your chandelier has multiple tube),normally we provide 4 buttons(group button) for your option. once you turn on the light, select any one group button, press this button one time toward this light within 5 seconds.the light tube or lamp will flash 3 times, which code match success between light and above related button,follow this step operation repeatly for other group button and light tube, pls. remember the button of your setting.
Code erase: once your chandelier turns on, press main power button 5 times quickly within 5 seconds. the light will flash 6 times, then the code match was dismiss.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>