Avantree TWS116 True Wireless Earphones for TV User Manual

User Manual
True Wireless
Earphones for TV
TWS116

Product overview

How to wear

How to charge

Charging the earbuds

It takes about 2.5 hours to fully charge. will automatically turn off when the charging is complete.

Charging the case

(4) will turn off automatically when fully charged.

Basic operations

automatically.
OR
from off status, long press  for about 3 seconds
Power Off| Put the earphones back into the charging case and they will power
off and begin charging.
OR
double click (1)  and hold for about 3s until the indicators dim out.
Pairing| Remove earphones from the case.
OR
from off status, press & hold  for about 3s. One earphone will enter
PAIRING MODE with the indicator flashing BLUE & RED.
Play / pause| Click (1) once on either side
Volume up / down| Press & hold (1) on the EITHER earphone
Previous / next track| Double-Click (1)  on EITHER earphone
Answer/end a call| Click (1)  once on EITHER earphone
Activate Siri / Google Assistant(Phone dependent)| Triple-Click (1)  on EITHER earphone

LED Indications

Earphones

connected
Not connected with phone| One earphone flashes BLUE once every 8s,
while the other flashes BLUE & RED| Disconnected
Earphones Not connected with each other| Both earphones flash BLUE & RED| NA
Low battery| Triple-Flash RED every 5 mins| Battery low
Charging| SOLID RED| NA
Fully charged| Both earphones’ Indicators dim out| NA

Charging Case

How to pair

How to use with Mobile Device / PC

For first use
Please put both earphones onto the charging case

1. Remove BOTH earphones to turn them ON.

2. Wait for the LED on ONE of the earphones to flash BLUE & RED – PAIRING MODE.

3. Search & select Avantree TWS116 from the Bluetooth menu on your device to connect.
   

4. Once connected, the flashing on both earphones will slow down significantly.

Notes:
For use with PC, please make sure that you set Avantree TWS116 as the default output and input device. If you’re not sure how, please see the guides below:

For Windows
PC For MacBook

Reconnecting

The earphones will auto-reconnect to your most recently paired device the next time you remove them from the case. If they don’t, please select “Avantree TWS116” on your device to manually reconnect.

Note: To connect with another device, please turn off Bluetooth on the previously connected device.

How to use with TV

For how to use with TV, please refer to this FAQ:
https://avantree.com/product-support/BTHS-AS90P-BLK-X?k=AS90T#general- headphones-use-with-television
Mono (Single) earbud use
Either side can be used independently by itself.

1. Follow the section above and pair both earbuds to your device first.
2. Put both earbuds back into the charging case.
3. Take out the earbud you’d like to use, it will automatically reconnect to your device.

How to Factory Reset

1. Power off both earphones manually – double click and hold for about 3s until the LED lights up RED about 1s, then turns off.
   

2. Take one of the Earphones (either one), Press & hold for about 10s. DO NOT release until you see the indicator turns PINK. It’ll power off right after.

3. Put the Earphone back into the case.

4. Take the other earphone out and do the same (steps 2 & 3). Now they’ve been reset.

5. Connect two earphones – Remove both earphones from the case. LEDs on both earphones will flash BLUE & RED – indicating that they are connecting with each other.

6. Once they’ve connected with each other, the indicator on one of the earphones will switch into flashing BLUE, while the continues flashing BLUE & RED alternately.
   Now you can pair with your device again.

Note: before pairing again, please delete Avantree TWS116 from your device’s Bluetooth list.

Support

FAQ

View the FAQs on https://avantree.com/product-support/BTHS-TWS116-BLK

How to take care of your TWS116

• Always store the earbuds inside the charging case and make sure that they are safely protected.

• The TWS116 is designed to function optimally between the temperatures of 0°C and 40°C (32-100°F.)
  Although it can and will function beyond this temperature range, performance may be impaired.

• Avoid storing the earbuds for extended periods of time without recharging them (max. three months.)

• The charging case is designed to charge using standard USB voltage (5v ± 0,25v). It is not recommended to charge this product using power supplies/sources with higher voltage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>