JOYROOM JR-TL2 Large Capacity Digital Display TWS Bluetooth Earphone User Manual

JOYROOM JR-TL2 Large Capacity Digital Display TWS Bluetooth Earphone User Manual

The basic information

Product name Large capacity digital display TWS
Bluetooth earphone
Product model: JR-TL2
Weaning method: ,n-ear
Bluetooth: VS.0
Reception sensitivity -85db
Frequency response: S0Hz-20KHz
Microphone sensitivity: -40db±2db
Earphone battery capacity: 40mAh
Charging case battery capacity: lS00mAh
Support Bluetooth protocol: A2DP/AVRCP/HSP/HFP
Driver: ∅ l0rnrn/ full frequency
Music time about 3.5 hours (80% volume)
Call time: about 3.5 hours (80% volume)
Charging input standard: Type-C DC-SV / 450mA±S0mA
Charging time of charging case: about 2.5 hours
Charging time of earphone: about 1.5 hours
Standby time: about 200 hours
Product material: ABS/PC
Net weight: 105g

Product overview

1. Charging case power display
2. Charging pins
3. Charging contact
4. LED status indicator light
5. Touch area/multifunction button
6. Microphone
7. USB charging output
8. TYPE-C charging input

Product wearing method

Due to product structure design reasons, please follow the example diagram and the following steps to wear correctly

1. Take out the earphone on the right side of the charging case and wear it to the left ear
2. Take out the earphone on the left side of the charging case and wear it to the right ear
3. Insert the earphone into the cochlea gently and adjust it to an appropriate angle

The pairing operation

Bilateral pairing operation

1. Open the charging case, the earphone will automatically turn on.
2. Take the earphone out of the charging case, the left/right earphone 1s automatically paired, and the main earphone flashes alternately with red light and blue light
3. Turn on the Bluetooth and search for the Bluetooth device ” JR-TL2″
4. Click on the connection. After the connection is successful, the prompt sound was Hid”
5. At this point you can start listening to the music and calling
   Note: For the first time, you need to manually connect the earphone. The earphone that is not connected for the first time will automatically connect back to the last connected device iPhone and Android phone connection is the same)

Single earphone pairing operation

1. Open the charging case. take out the earphone and 1t will automatically turn on
2. Take out the left/right earphone from the charging case and the earphone flashes red and blue light
3. Turn on the B1uetooth and search for the Bluetooth device JR-TL2″
4. Click on the connection. After the connection is successful. the prompt sound was “di”
5. At this point, you can start listening to the music and calling.

Main and secondary earphone switching mode:

1. Switch to unilateral use in binaural mode:
   A. In the process of using bilateral earphones. put the left earphone into the charging case and it will automatically switch the right earphone to the main earphone and keep the music state before the switch
   B. In the process of using bilateral earphones. put the left earphone into the charging case and it will not affect the normal working of the left earphone;
   C. Take out the left or right earphone separately and they will automatically connect back to the phone

Common operating instructions

Prompt description

Earphone indicator

Charging case indicator

Precautions

1. “JR-TL2′ can be operated and executed by the left and right earphone touch function area during normal operation of the earphone
2. lf the earphone crashes, place the earphone in the open charging case to reset the earphone (provided the charging case is power on)
3. “JR-TL2″‘ binaural earphones, support automatic back connection of earphones, that is, the last connected device function
4. After the JR-TL2″ binaural earphones are connected to Bluetooth or disconnected from Bluetooth, if there is no operation, it will automatically shut down after more than 5 minutes
5. “JR-TL2” earphones are put into the charging case to charge by themselves After being fully charged, the Hight will go out. Next time you use the earphone. they will automatically connect the last device that has been connected
6. Earphones reset all settings press and hold the two earphones· touch area at the same time until the red and blue lights alternately flash, the red and blue lights of two earphones will flash for 3 times, the last one will flash red and blue twice, and the other will have no light flash. It means that the two earphones are successfully paired and wait tor the Bluetooth paining status with the mobile phone. At this time. connect the Bluetooth
7. The earphone 1s put into the charging case, the earphone 1s automatically turned off, the charging case automatically charges the earphone, and it will automatically power oft.
8. Wear the left and right earphones and put them back into the charging case Due to the structure design characteristics of the product. please put the left earphone back into the right position of the charging case and the right earphone back into the left position of the charging case after using the earphone

Trouble shooting

If your Bluetooth earphone cannot be paired with your phone. try the following steps.
Please make sure the earphone is fully charged:
Please make sure the earphone is turned on;
Make sure the earphone is not connected to other devices:
Please make sure your phone’s Bluetooth function is normal and Bluetooth 1s turned on.
Make sure the distance between the earphone and the phone is within the connectable range:
Please try to restart the earphone (put the earphone back to the charging case, turn it off: then open the charging case cover and wait for the earphone to automatically pair successfully, take it out from the charging case, re- open the Bluetooth to reconnect)

Safety guidelines

1. Please follow the instructions 1n this manual. Do not disassemble or modify the device for any reason. Otherwise, 1t may cause the earphone to occur trouble or burn down:
2. Do not immerse the product in any liquid or rinse the product with water;
3. Do not use the charger that exceeds the rated current voltage of the earphones (SV/lA) to charge the earphones, otherwise it will easily cause the earphones battery damage;
4. Please use and store the product in a normal temperature environment. Do not place the device under too low or too high In the environment of (below 0° or above 45°)
5. Do not block the opening of the earphone, such as the charging port. indicator light and microphone;
6. Avoid using earphones at excessive volume or for too long to avoid dizziness or hearing damage.
7. Do not use the device during thunderstorms. Thunderstorms can cause the device to malfunction and signal interruption.

Warning

Please follow the safety cautions and use the product in a correct way to avoid casualties and damages. Please follow the following notes to prevent accidents like fire, overheat. ·chemical leakage and explosion.

1. To reduce the risks of fire and damage of the battery, please do not expose the product to the rain or moisture environment
2. To reduce the risks offered, please do not cover the product with inflammables like carpet and quilt
3. To prevent the product from further damages, it is prohibited to dismantle the broken device without permit In this case, please consult the Aftersales Department for the repair.
4. Please do not use it when the device is overheating
5. Please do not apply any batteries, powers or accessories other than specified in the Instruction
6. Please do not use self-made or modified batteries
7. Do not use the wireless charging transmitter that has not passed the QI certification standard to charge the charging case.

Warranty Card

User’s name__
User’s telephone __
User’s Add__
Date of purchase
Invoice ____
Dealer’s name __
Dealer’s Add ___
Dealer’s telephone__

Warranty
This product is covered under warranty for a period of one year from the date of purchase limited to normal use and maintenance of the machine parts, materials and functions, Problems and failures verified upon fur there identification, will be provided free repair and replacement parts.

Limited to the following

• A. Headset is beyond the warranty period
• B. User does not follow the instructions. so that the headphone wire and earplug broken
• C. Without the authorization to dismount, repair, alteration structures
• D. Can’t provide proof of purchase.
• E. Man made damage
• F. Due to natural disasters and other force majeure (such as earthquakes, fires} product failure of damage causes;

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>