JLab Play Gaming Headphones User Manual
- June 6, 2024
- JLab
Table of Contents
JBUDDIES PLAY
GAMING HEADPHONES
We love that you are rocking JLab Audio! We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole
discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or
visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates
How-to tips
FAQs & more
BLUETOOTH PAIRING
CHARGING
BUTTON FUNCTIONS
VOICE PROMPTS
“HELLO” = Power is ON.
“READY TO PAIR” = JLab Play headphones are ready to connect to your
Bluetooth device.
“YOU’RE CONNECTED” =
JLab Play headphones are connected to your Bluetooth device and ready for use.
“GOODBYE” = Power turning OFF.
NOTES:
-
When using the AUX INPUT, the microphone and game volume will also be determined by your console settings.
Adjust accordingly. -
The boom microphone and mute function work in both Bluetooth and AUX INPUT modes.
-
The button functions on the headphone ear cup will only work in Bluetooth mode.
CONSOLE + MOBILE GAMING
PC / MAC SETUP IF CONNECTED TO BLUETOOTH
SETUP with PC (Windows 7, 8, or 10):
- From the Start Menu, select the Control Panel.
- Select the Hardware and Sound category.
- Select the Sound category.
- The Playback tab should show JLab Play Gaming Headphones connected as the Default Device.
- Click the next tab that says Recording.
- Right-click the JLab Play Gaming Headphones icon and select “Set as Default Device”.
- Click the OK box to save changes.
SETUP with MAC (macOS 10.1 and higher):
- Open System Preferences and select the Sound icon.
- Select the Input tab and select “JLab Play”.
- Select the Output tab and select “JLab Play”.
- From this screen, set the Output volume to the desired level.
- Closing out of the window will save settings.
CAUTIONS
- Avoid getting moisture or liquids on the headphone cups.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
- Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in a safe location when not in use.
Shop products
Product alerts
Burn-in your headphones
JLab Audio + Burn-in Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>