JLAB Epic Air Sport ANC Earbuds User Manual
- June 6, 2024
- JLab
Table of Contents
EPIC AIR SPORT
ANC EARBUDS
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
| YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole
discretion. Retain your proof of purchase to ensure warranty coverage.
---|---
| CONTACT US
Reach out to us at support@jlabaudio.com
or visit jlabaudio.com/contact
REGISTER TODAY
jlabaudio.com/register
Product updates | How-to tips
FAQs & more
FIRST TIME SETUP
-
AUTO-CONNECTING EARBUDS
A. Take earbuds out of the charging case and remove stickers.
B.
Press and hold 3+ seconds on each earbud. Blinking blue and white light on one
earbud will indicate ready to pair to your device. -
CONNECTING BLUETOOTH
Select “Epic Air Sport ANC” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth
from the new device. Take earbuds out of the case. Earbuds will automatically
enter Bluetooth Pairing. Select “Epic Air Sport ANC” in new device settings to
connect.
DOWNLOAD THE APP
Customize Epic Air Sport ANC features and update the latest software. Download the JLab Air ANC APP in Apple/Google Play Store.
CONTROLS
VOLUME DOWN: Single tap
SIRI (iOS) or “OK GOOGLE”
(ANDROID): Double-tap
BE AWARE / ANC ON / ANC OFF:
Press & hold 1+ sec
EQ CHANGE: Triple tap| VOLUME UP: Single tap
PLAY / PAUSE: Double-tap
TRACK FORWARD: Press & hold 1+ sec
EQ CHANGE: Triple tap
---|---
ANSWER: Single Tap Left or Right
HANG UP: Double Tap Left or Right
REJECT INCOMING CALL: Double Tap and hold 1+ seconds Left or Right
MUSIC / MOVIE MODE: Press and hold both touch sensors simultaneously for 3+
seconds.
POWER OFF WITHOUT CHARGING CASE: Turn off your Bluetooth from your device
settings. The earbuds will then power off after 3 minutes.
VOICE PROMPTS
“Hello”: Power ON
“Ready to Pair”:
Epic Air Sport ANC is ready to pair to your Bluetooth device
“Be Aware”: Hear your surroundings
“ANCON”: Noise-canceling ON
“ANC OFF”: Noise-canceling OFF
“Bluetooth Connected”: The earbud is connected to the device
“Battery Full”: 100-75%
“Battery Medium”: 75-25%
“Low Battery”: Less than 25%
(When power decreases to 10%,
“Low Battery” will play one time)
“Goodbye”: Power OFF
EQUALIZER MODES
Triple tap either earbud for different EQ settings. Voice prompts will indicate EQ settings (Epic Air Sport ANC will cycle 4 EQ settings) Customize each EQ setting by downloading the JLab Air ANC App in Apple/Google Play Store
AUTO-POWER ON/OFF
-
Placing the earbuds in the charging case will power OFF earbuds and start charging.
Blue lights indicate earbuds are charging and will turn off when fully charged.
-
When taken out of the charging case, they will auto power ON and connect.
WIRED CHARGING
Connect the Epic Air Sport ANC to a computer or USB 5V 1A (or less) output device.
LEDs pulse white when charging and turn solid white when fully charged.
WIRELESS CHARGING
Place the charging case on a wireless charging platform.
LEDs pulse white when charging and turn solid white when fully charged.
FITTING
Try all ear tips for the best fit and proper seal.
Place in the ear canal and slightly rotate to adjust for best fit.
TROUBLESHOOTING
NO AUDIO IN ONE EARBUD OR EARBUDS ARE DISCONNECTED (MANUAL RESET)
- Enter your Bluetooth device settings and forget the Epic Air Sport ANC. FigA
- Keep the earbuds in the charging case and on ONE earbud quickly tap the touch sensor 7x times. The light blinks blue 3 times. Fig C
- Repeat with another earbud. Quickly tap the touch sensor 7x times. The light blinks blue 3 times. Fig C
- Take both earbuds out of the charging case. Wait for one earbud to turn solid white and one to blink blue/white. You are now ready to pair to your Bluetooth device.
BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT
- Enter your Bluetooth device settings and forget the Epic Air Sport ANC. FigA
- Turn OFF then ON Bluetooth. Fig B
- Take the earbuds out of the case. Wait for one to turn solid white and one to blinking blue/white.
- Select “Epic Air Sport ANC” in device settings to reconnect.
Instructional videos at: JLABAUDIO.COM/MANUALS
QUICK TIPS
- The left or right earbud can be used independently for music and phone calls. Simply choose one and take it out from the case to connect.
- Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on the chosen device to connect.
- Fully dry off earbuds before putting them in the charging case to avoid any damage to the case.
WARNING
Fully dry off the earbuds before placing them in the charging case.
If the earbuds are damp or wet, this will cause damage to the charging case.
The warranty will be voided if the charging case shows damage by water/sweat.
CAUTIONS
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in a safe location when not in use.
Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>