savio TWS-07Pro Wireless Bluetooth Earphones User Manual

: June 6, 2024
: Savio

Table of Contents

Product diagram
Charging Device
Pairing earphones
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wireless Bluetooth earphones model: TWS-07Pro, TWS-08Pro
User manual

Thank you for choosing our product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, on social media or on the website of the store where you made the purchase. If you want to show off our device on Savio.net.pl FanPage on Facebook, we will be very pleased.

If there is something that we could improve on our products, please write to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.
CAUTION!

To increase the life of the built-in batteries, it is recommended to fully charge the earphones before first use.

Product diagram

Earphone multifunction button
Microphone
Docking station / power bank
Earphones charging connector
Micro USB connector for charging the power bank
LED indicating power bank mode of operation

Charging Device

Charging the earphones and power bank from an external power source.
Connect the Micro USB cable to the charging socket on the power bank.
Insert the earphones into the dock (the red notification light will flash red to indicate the power bank is charging). If the earphones are discharged, they will glow red and charging will start.
If the power bank is fully charged, the red LED will be on steady.
If the earphones are fully charged, the backlight turns off, the earphones are ready to use.
Charging the earphones using the built-in power bank.
Insert the earphones into the power bank dock.
The power bank LED will blink blue and the earphones will illuminate red to indicate charging.
If the earphones are fully charged, the red backlight turns off, the earphones are ready to use.

Pairing earphones

Savio TWS-07 Pro / TWS-08 Pro earphones can be used together or separately. By default, the earphones are connected to each other. In case two earphones are turned on and only one works, go to step 4.3 and connect both earphones.

Pairing two earphones with the transmitting device.
Remove the earphones from the power bank, the earphones will be automatically turned on. When the earphones are properly connected, you will hear: „Connected”. In this case, the notification LED should flash alternately red and blue on only one of the earphones
Turn on the Bluetooth mode on the transmitting device (e.g. Smartphone), then turn on the device search and select the earphones from the SAVIO TWS-07 Pro / TWS- 08 Pro list. If earphones have already been paired with this device, they will be connected automatically.
When the earphones are connected to the device, the red-blue LED on the earphone will stop flashing. The earphones are now ready to use.
Pairing one earphone with the device.
Remove the earphone from the power bank, the earphone will be automatically turned on.
Turn on the Bluetooth mode on the transmitting device (e.g. Smartphone), then turn on the device search and select the earphone from the SAVIO TWS-07 Pro / TWS-08 Pro list. If earphone has already been paired with this device, it will be connected automatically.
When the earphone is connected to the device, the red-blue LED will stop flashing. The earphone is now ready to use.
Connecting two earphones together (in case two earphones are switched on and only one works).
Remove the earphones from the power bank, the earphones will be automatically turned on.
Make sure the earphones are not connected to another device via Bluetooth, e.g. a telephone.
Press the button on one of the earphones twice.
If the earphones connect to each other, you’ll hear the message „Connected”.In this case, the notification LED should flash alternately red and blue on only one of the earphones.
The earphones are now connected and ready to use.
Disconnecting two earphones (in case both earphones work and you only want to use one)
Remove the earphones from the power bank, the earphones will be automatically turned on.
Make sure the earphones are not connected to another device via Bluetooth, e.g. a smartphone.
Press the button on one of the earphones twice. If the earphones connect to each other, you’ll hear the message „Disconnected” In this case, the notification LED should flash alternately red and blue on both of the earphones.
The earphones are now disconnected and ready to connect the device.
Description of the multifunction key.
Pressing and holding the multifunction key switche the earphone on / off.
During playing a song:
– Press once: pause / resume play
– Press the button on the right earphone twice: select the previous song
– Press the button on the left earphone twice: select the next song
– Press the button on the right earphone three times: volume down
– Press the button on the left earphone three times: volume up
During an incoming call:
– Press once: answer an incoming call
– Press and hold: reject an incoming call
Restarting the earphones
If the earphones cannot connect to each other or the transmitting device, restart the earphones.
Turn off Bluetooth on the transmitting device, e.g. smartphone
Take one of the earphones from the power bank, then press and hold the multifunction button on the earphone until the earphone turns off (the LED goes off).
Insert the earphone back into the power bank.

When you restart the earphones, one of the earphone must be in the power bank at all time. 25. Repeat the same sequence (described in section 5.2) with the second earphone.
Remember to place the other earphone in the power bank. 26. The earphones are restarted and ready to connect to the transmitting device. 27. Set contains:
– TWS-07 Pro / TWS-08 Pro Bluetooth wireless earphones
– USB charging cable (M) – Micro USB (M)
– Docking station / power bank
– User manual
– Additional silicone inserts in size S, L
1. Additional information:
  – Bluetooth version: 5.0
  – Operating range: up to 10 meters
  – Operating time: up to 2 hours
  – Earphones charging time : about 40 min
  – Power bank charging time: about 70 min
  – Standby time: up to 120 hours
  – Built-in microphone: Yes
  – Notification LED: Yes
  – For charging the power bank it is recommended to use a charger max. 2A or charging from a USB port on your computer
  – Charging power bank does not require placing earphones
  – Charge the earphones and power bank fully before using for the first time

Producent:
Elmak Sp. z o.o.
Ul. Morgowa 81, 35-323 Rzeszów
www.elmak.pl, www.savio.net.pl

This symbol means that in accordance with European Union directive 2012/12EU, electrical and electronic equipment should not be disposed of with other household waste. The equipment should be sent to a local collection point for this type of waste or to a recycling center. Please contact your local authority for information on available disposal methods. Importer disposal of waste is threatened by the penalties provided for by law in force in the given area. Proper disposal of equipment will help to avoid the negative effects that threaten the environment and human health, in the event of improper utilization.

Information for customers and contractors and communication regarding complaints:

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of the Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit the processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision-making, including the profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.