Tronsmart Apollo Bold – True Wireless Earbuds User Manual

Tronsmart Apollo Bold – True Wireless Earbuds User Manual

Product Overview

1. Touch control
2. LED indicator for pairing
3. Mic
4. Type-C charging port
5. LED charging indicator
6. Charging contact

Package Content

1 x Apollo Bold earbuds with charging case
3 x Ear tip pairs (a pair are placed on the earbuds)
1 x Charging cable
1 x User manual
1 x Storage bag
1 x Warranty card
1 x Quick start guide

Charging

1. Fully charge the earbuds and the charging case before first time use.
2. Use the included Type-C charging cable.

LED indicator

1. Earbuds
   

2. Charging case
   Charging
   
   Not charging
   

Power On/Off

The earbuds will automatically power on when taken out of the charging case and will power off when placed back into the charging case.

Bluetooth Pairing with your Device

1. Take out two earbuds from the case.
2. The red and white light flash alternately.
3. Then select ‘Tronsmart Apollo Bold ‘ from your device’s Bluetooth list.
4. Tap the ‘Pair’ option when ‘Bluetooth Pairing Request’ popup comes.
5. Paired with the device successfully.

How to Reset if the Earbuds Malfunctions

1. Take two earbuds out of the case. (Make sure that the two earbuds are not connected.)
2. Tap the touchpad of left and right earbud five times respectively, then you can pair the left and right earbud. (The light of earbuds flash red twice and white in sequence.)
3. The white light of left and right earbud flash slowly.
4. The left and right earbud are paired successfully.

Clear the Phone’s Pairing List

1. Take out two earbuds from the case and wait for Bluetooth pairing mode.
2. When the red and white light of earbuds flash alternately, tap and hold the touchpad on earbuds for 5 seconds until the red light flashes three times.
3. Put two earbuds back in the case after the light of earbuds goes off.
4. The earphones can be re-connected to the phone by taping the ‘Tronsmart Apollo Bold ‘ that displays in your pairing list.

Touch Control

Specifications

Care and Maintenance

1. If this product is not used for a long period of time, it’s recommended to recharge it at least once a month to extend its life and maintain the normal use performance.
2. Keep the product in a dry location.
3. Do not dispose this product in fire as batteries may explode or leak.
4. To clean the product, use a lightly dampened cloth in water to clean the exterior in-case it gets dirty. 5.Do not disassemble this product. It contains no user serviceable parts.

Warranty Information

Your ‘Tronsmart Apollo Bold True Wireless Earbuds’, is warranted to the original owner for 1 year from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.

FCC STATEMENT:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SHENZHEN GEEKBUY E-COMMERCE CO., LTD.
19th Floor, Galaxy World Tower B, #1 YaBao Rd.,
LongGang District, Shenzhen, China
Email: support@tronsmart.com
800-270-1082 (USA & Canada)
+86-755-23603740 (Global)

www.tronsmart.com Made in China FCC ID：2AV3Z- APOLLOBOLD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>