JLAB GEBJBAIRPLAYRBLK82 Gaming True Wireless Earbuds User Manual
- June 6, 2024
- JLab
Table of Contents
JLAB GEBJBAIRPLAYRBLK82 Gaming True Wireless Earbuds User Manual
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
REGISTER TODAY
jlabaudio.com/register
Product updates | How-to tips
FAQs & more
BLUETOOTH PAIRING
RECURRING USE
Once JLab Play has initially paired to your device, the earbuds will auto- connect to your Bluetooth device when powered back ON. (Follow BUTTON FUNCTIONS instructions)
CHARGING
BUTTON FUNCTIONS
VOICE PROMPTS
“HELLO”
Power is ON.
“READY TO PAIR”
JLab Play earbuds are ready to connect to your Bluetooth device.
“YOU’RE CONNECTED”
JLab Play earbuds are connected to your Bluetooth device and ready for use.
“GOODBYE”
Power turning OFF.
CONNECTING CONSOLE / DEVICE
PC / MAC SETUP IF CONNECTED TO BLUETOOTH
SETUP with PC (Windows 7, 8, or 10):
- From the Start Menu, select the Control Panel.
- Select Hardware and Sound category.
- Select the Sound category.
- The Playback tab should show JLab Play Gaming Earbuds connected as the Default Device.
- Click the next tab that says Recording.
- Right click the JLab Play Gaming Earbuds icon and select “Set as Default Device”.
- Click OK box to save changes.
SETUP with MAC (macOS 10.1 and higher):
- Open System Preferences and select the Sound icon.
- Select the Input tab and select “JLab Play”.
- Select Output tab and select “JLab Play”.
- From this screen, set the Output volume to desired level.
- Closing out of the window will save settings.
NOTES:
- When using the AUX INPUT, the microphone and game volume will be determined by your console settings. Adjust accordingly.
- The in-line microphone and mute function works in both Bluetooth and AUX INPUT modes.
- The button functions on the earbuds will only work in Bluetooth mode.
FITTING
CAUTIONS
- Avoid getting moisture or liquids into the tip of the earbuds or charging port.
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
- Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
- If you experience regular discomfort while using this product, discontinue use and consult your physician.
- We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.
Read More About This Manual & Download PDF: