Avantree BTHS-AS90T-BLK Aria Podio Wireless ANC Headphones with Charging Stand User Manual

Avantree BTHS-AS90T-BLK Aria Podio Wireless ANC Headphones with Charging

Stand

What’s in the box?

1. AS90T wireless headphones x 1
2. Charging stand x 1
3. Detachable boom microphone x 1
4. Hard travel case x 1
5. USB charging cable x 1
6. Audio cable x 1

**Product Overview

**

Basic Operation

Power ON – Slide the power switch to middle position
Power OFF – Slide the power switch to
Pairing Mode – Slide the power switch to and hold for 3s till LED blinks RED & BLUE alternately.
Play / Pause music – Press once
Volume up / down – Press / once
Next / Previous track – Hold / for 2s
Answer / End a call – Press once
Last number redial – Press twice
Reject a call – Hold 2s during an incoming call
Activate / Deactivate Voice Assistant – Press once
Activate ANC – (Power ON status)
Deactivate ANC
Headset without boom mic – Press once to
mute / unmute with Boom Mic – Mute On / Mute Off
Activate Voice Prompts – Hold BOTH [ ] and [ ] for 1s
Deactivate Voice Prompts – Hold BOTH [ ] and [ ] for 1s
Clear paired history – Hold BOTH [ ] and [ ] for 5s till LED blinks PINK for 2s, then the headphones enter into PAIRING MODE automatically.

LED indications

Working Status                                            LED indicator
Pairing Mode                                            Blinks BLUE & RED alternately
Reconnecting                                            Blinks BLUE once every 1s
Disconnected                                            Blinks BLUE once every 2s
Connected with SBC Codec                      Blinks BLUE once every 5s
Connected with AptX Codec                     Blinks BLUE twice every 5s
Connected with AptX-LL Codec               Remains BLUE
Connected with AptX-HD Codec              Blinks BLUE three times every 5s
Low Battery                                                Blinks RED once every 1min

Bluetooth Pairing

Put the headphones into Pairing Mode (On 1st use, it will enter PAIRING MODE automatically once turned on.)

Pair to mobile device
Set the headphones into Pairing Mode as above. Activate Bluetooth on your phone and set it to search for new devices. Select “Avantree AS90T”, once successfully paired you’ll hear “connected”.

To add another cell phone
Connect with the FIRST phone as above, then turn off the headphones. Connect headphones with SECOND phone as above. Tap and select “Avantree AS90T” on the FIRST phone Now, Avantree Aria Podio connected with TWO phones simultaneously.

Reconnection

Normally, when the next time you turn on Avantree Aria Podio, it will automatically reconnect the last paired device. Alternatively, Slide the power switch to [ ] once then release to enter into its Reconnection Mode.

Using the AUX Input

• Use the supplied 3.5mm audio cable to connect to a non-Bluetooth device.
Note : If you wish to use the ANC function in wired mode, please turn on the headphones firrst.

Charging
When the LED flashes RED once every 60 seconds, please recharge your headphones. Please place the headphones onto the charging dock or plug it into a USB wall charger (DC 5V/0.5-2A) using the included micro USB cable. Normally it will take about 2 hours to fully charge. Place the headphones onto the charging dock, the LED indicator on the stand will stay solid WHITE while charging and turn GREEN when charging is complete. While charging, the headphones’ LED will turn RED and will turn off once charging is complete. To assemble the hanger onto the base – please match the arrow on the hanger support with the UNLOCK position on the base. Insert and twist clockwise until it clicks into position.
Note : To avoid damage to headphones, please DO NOT charge the headphones using both the desktop charging stand and the micro USB cable at the same time.

Clear pairing history

If you have issues with the audio stream skipping or cutting out when using Avantree Aria Podio (AS90T), please try to clear pairing history as following: Firstly, turn on the headset (Non-calling Status), then Hold BOTH [ ] and [ ] for 5s till LED blinks PINK for 2s, then the headphones enter into PAIRING MODE automatically.

Troubleshooting

https://avantree.com/catalogsearch/result?q=Aria+Podio

1. No sound with PC?
2. Under Playback Devices select the Avantree AS90T as the default playback device
3. When using AS90T to make VOIP calls from an app, please select the AS90T, Hands-Free for Microphone and Speaker device
4. No sound using a Bluetooth transmitter to watch TV?
5. Ensure the Bluetooth transmitter and headphones are connected properly
6. Check that your audio OUTPUT is functioning properly

  * AUX & RCA (red and white) outputs on TV – test audio with any wired headphone.
  * OPTICAL output on TV – set your TV audio format to “PCM/LPCM” or turns off Dolby/DTS
3. Change your TV audio out device setting to External speakers/Headset

3. Headphones do not pair with Bluetooth device
4. Ensure the AS90T is in Pairing mode – LED will flash BLUE and RED alternately.
5. For Bluetooth transmitter, ensure the transmitter is in Pairing mode – please refer to user manual.
6. For mobile phones, tablets and PCs:

  * Turn the Bluetooth off then on again.
  * Delete/forget the “Avantree AS90T” from your device’s Bluetooth list and then try to pair again
  * Clear the headphone’s pairing history, and pair again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>