ventair V150BAL40E Exhaust Fan Accessories User Manual
- June 16, 2024
- ventair
Table of Contents
ventair V150BAL40E Exhaust Fan Accessories
OVERVIEW
INSTALLATION
V150BAL40E / V150BAL40W
- Use the template provided to mark the cut-out hole ensuring there are no beams, pipes or cables obstructing the proposed install position.
- Use the appropriate hole-cutting tool (dependent on the wall or eave Material) to cut-out the mounting hole. (fig. 1)
- Remove the small safety screw (fig. 2) then detach the Mesh Panel and/or Main Fascia. Place the Vent Body into the cut-out hole and mark the position for the fixing screws. (fig. 3)
- Using the screws provided (or other type as required) fix the Vent Body securely to the Wall/Eave. (fig. 4)
- Attach the Mesh Panel and/or Main Fascia ensuring the Tab is located securely into the notch on the main Vent Body. (fig. 5)
- Gently fix the safety screw back into position.
NOTE : Do not over-tighten. (fig. 6)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>