TWISTED MINDS TM27FHD100IPS 27 Inch Display Fast IPS Gaming Monitor Instruction Manual

**TWISTED MINDS TM27FHD100IPS 27 Inch Display Fast IPS Gaming Monitor

**

Please read this manual thoroughly before use and keep it handy for future reference

Before using this product, please read this User Manual carefully and keep it well

Notices

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it mat cause human injury or device damage.
• Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable earthing socket, do not overload the socket, or it mat cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Product introduction

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
• Wires supplied may vary with purchased products. Figures in this User Manual are for reference only .

Monitor

Stand

Base

Adapterx1

Screws PM4*10(1pc)

HDMI signal cable

Instructions

Redundant screws can be used as spare screws.

Installation

Installation of base

1. Take out the Stand Neck and base, and assemble the base with a screw.
   

2. Insert the assembled neck into the monitor until you hear a “ciclk” sound, the installation is complete.
   

3. After assembly, simply hold the stand with hand to stand the monitor upright.
   

Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.

Adjusting the monitor

Tilting angle
-5.0°(±2.0°)- +15°(±2.0°)

Usage

Button

| Function
---|---
| Menu button: Press to enter sub-menus/ quickly enter the main menu
| Down button: Press to move down in the menu/quickly ECO hot key
| Up button: Press to move up in the menu/Signal selection
| Exit/ GamePlus selection
| Power button: Press to turn on/off the monitor

Explanation of indicators

Indicator: Steady green light indicates the power is on and the monitor runs normally. Green light flashing indicates no video source and no horizontal or vertical signal detected or low voltage. Please make sure your computer is turned on and all video cables are fully plugged in and/or connected.

Cable connection:

• The bottom interface configuration at the back of the monitor varies with products.
• Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

HDMI interface
Use the HDMI cable to connect the HDMI IN interface of the product to the HDMI OUT interface of a PC.

VGA interface
Use the VGA cable to connect the VGA IN interface of the product to the VGA OUT interface of a PC.

AUDIO IN
Connect an audio cable to the audio port on the monitor (Audio In) and the audio port on your computer.

AUDIO OUT
Connect audio outputting devices such as earphones to the AUDIO OUT interface.

Power Adapter
Please connect the power adapter to the power adapter interface of a monitor, and plug the other end of the power cable into the power socket.

OSD menu

Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice.

The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.

1. Press to enter the OSD screen.
   

2. Press or to scroll through the functions.

   • Select the desired function, and press to enter the sub-menu.
   • Press or to scroll through sub-menus, and press key to select and confirm the desired function.
   • Press or to select one option, and press to confirm settings and exit from the current menu.

3. Press to exit from the menu screen.

Functions of the monitor vary with models, and the functions in this manual are for reference only.

Basic parameters

The standard voltage and current may vary with countries, please refer to the label at the back of the product.
Product Dimensions
Normal base| Without base| 61436353mm/ weightx3.54kg
With base| 614480170 mm/ weightx4.0kg
Tilting angle| Forward titling: 5°±2°; Backward tilting : 15°±2°
Height range| NA
Rotation angle| NA
Vertical angle| NA
Environmental conditions| Action| Temperature: 0°C~ 40°C (32°F ~ 104°F)
Humidity: 10%~90% RH (non-condensing)
Storage| Temperature: -20°~ 60° (-4°F ~ 140°F)
Humidity: 5%~95% RH (non-condensing)

EMAIL: INFO@TWISTEDMINDS.CO
WEBSITE: WWW.TWISTEDMINDS.CO

https://manuals.plus/m/af23571542bc4ffb9fbd63d5a81e6ecee1554e6bab125c4638c177d46333b59a

References

• Twisted Minds | All Rules Broken – Twisted Minds UAE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>