clarion DXZ435 AM and FM CD Player Owner’s Manual

clarion DXZ435 AM and FM CD Player

Product Information

Specifications

• Manufacturer: Clarion Co., Ltd.
• Model: PE-2557K
• Part Number: 280-7913-01
• Year: 2003/04 (AB)
• Language: English

Features

The Clarion product (model DXZ435) offers the following features:

• Z-Enhancer Plus indication
• Operation status indication
• Preset channel indication (1 to 6)
• Disc number indication (1 to 12)
• Stereo indication
• Various display items such as titles, frequency, PS names, clock, etc.
• Scan, Repeat, Random, MAGNA BASS EXTEND, Mute, Enter, and Manual indications
• LCD Screen with normal temperature recovery capabilities

Precautions

1. When using the player in extremely cold conditions after the car heater has been switched on, moisture may form on the disc or the optical parts of the player. Wipe off any moisture on the disc with a soft cloth. If moisture forms on the optical parts, do not use the player for about one hour to allow the condensation to naturally disappear.
2. Driving on extremely bumpy roads that cause severe vibrations may result in sound skipping.
3. Do not open the case, disassemble the unit, or lubricate the rotating parts of the precision mechanism.

CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. The compact disc player and mini disc player should not be adjusted or repaired by anyone except properly qualified service personnel. Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment.

Frequently Asked Questions (FAQ)

Q: Can I adjust or repair the compact disc player or mini disc player myself?
A: No, these devices should only be adjusted or repaired by properly qualified service personnel.

Q: What should I do if moisture forms on the disc or optical parts?
A: If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts, do not use the player for about one hour to allow the condensation to naturally disappear.

Q: What should I do if the screen movement slows down or darkens in extreme cold?
A: In extreme cold, the screen movement may slow down and darken, but this is normal. The screen will recover when it returns to normal temperature.

Owner’s manual
AM/FM CD PLAYER · ·

2003/04 (AB)

Clarion Co., Ltd.
All Rights Reserved. Copyright © 2003: Clarion Co., Ltd.

FEATURES

1-Bit D/A Converters and 8-Times Oversampling Digital Filter · Z-ENHANCER PLUS for Sound Creation with 3 Adjustment Modes (2-Band P.EQ) · MAGNA BASS EX for Dynamic Bass Tuning, Volume Level Dependent · DIN Chassis with Detachable Control Aluminum Face with Blue Negative LC Display · Screen Saver with User Programmable MESSAGE INFORMATION · CeNET with Balanced Audio Line Transmission and Dynamic Noise Cancelling

Display Items
Z-Enhancer Plus indication
Operation status indication Titles, frequency, PS names, clock, etc. are displays.
Preset channel indication (1 to 6) Disc number indication (1 to 12)

Stereo indication

: Disc indication : Scan indication : Repeat indication : Random indication
: MAGNA BASS EXTEND indication

: Mute indication : Enter indication : Manual indication

LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature.

2. PRECAUTIONS
3. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
   2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip.
   3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.

Handling Compact Discs

Use only compact discs bearing the

or

mark.

Do not play heart-shaped, octagonal, or other specially shaped compact discs.

Some CDs recorded in CD-R/CD-RW mode may not be usable.

Handling

• Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car.
• New discs may have

some roughness

Ball-point pen

around the edges. If such discs are used,

Roughness

the player may not

work or the sound

may skip. Use a ball-

point pen or the like

to remove any

roughness from the edge of the disc.

• Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.
• Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player.
• Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.
  · To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.
  · Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.
  Storage
  · Do not expose compact discs to direct sunlight or any heat source.
  · Do not expose compact discs to excess humidity or dust.
  · Do not expose compact discs to direct heat from heaters.
  Cleaning
  · To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference.
  · Do not use any solvents, such as commercially available cleaners, anti- static spray, or thinner to clean compact discs.
  · After using special compact disc cleaner, let the compact disc dry off well before playing it.

8

DXZ435

DXZ435

3

Be sure to unfold and read the next page. /

DXZ435

4

English
English English

3.CONTROLS /
Source unit / /
[ROTARY] [RELEASE]

/
[CD SLOT] [Q] [FNC] [A-M] [BND] [a], [d] [ ] [SCN] [RPT] [RDM] [DIRECT] [DN], [UP] [Z+] [SW-VOL] [ISR] [DISP] [TITLE] [P/A]

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

5

DXZ435

4. NOMENCLATURE

Note: · Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Names of the Buttons and their Functions

[RELEASE] button · Press the [RELEASE] button to unlock the
DCP.
[ROTARY] knob · Adjust the volume by turning the knob
clockwise or counterclockwise. · Use the knob to perform various settings.
[CD SLOT] · CD insertion slot.
[Q] button · Eject a CD when it is loaded into the unit.
[Z+] button · Use the button to select one of the 3 types of
sound characteristics already stored in memory.
[SW-VOL] button · Adjust sub woofer volume.
The volume is adjusted in the range ±6.
[ISR] button · Recall ISR radio station in memory. · Press and hold for 2 seconds or longer: Store
current station into ISR memory (radio mode only).
[DISP] button · Switch the display indication (Main display,
Sub display, Clock display).
[TITLE] button · Use the button to input a title in the CD
mode. · Press and hold the button for 1 second or
longer to enter the adjust mode.
[P/A] button · Perform preset scan while in the radio mode.
When the button is pressed and held, auto store is performed. [UP], [DN] buttons · Select the disc.
[DIRECT] buttons · Store a station into memory or recall it
directly while in the radio mode.
[RDM] button · Perform random play while in the CD mode.
[RPT] button · Repeat play while in the CD mode.
[SCN] button · Perform scan play for 10 seconds of each
track while in the CD mode.
[ ] button · Play or pause a CD while in the CD mode.
[a], [d] buttons · Select a station while in the radio mode or
select a track when listening to a CD. These buttons are used to make various settings. · Press and hold the button for 1 second or longer to switch the fast-forward/fastbackward.
[BND] button · Switch the band, or seek tuning or manual
tuning while in the radio mode. · Play a first track while in the CD mode.
[A-M] button · Use the button to switch to the audio mode
(bass/treble, balance/fader Z-Enhancer Plus, Magna Bass Extended adjustment)
[FNC] button · Press the button to turn on the power.
Press and hold the button for 1 second or longer to turn off the power. · Switches the operation mode among the radio mode, etc.

Major button operations when external equipment is connected to this unit

When the CD/MD/DVD changer is connected
For details, see the section “CD/MD changer operations”. For the DVD
changer, refer to the Owner’s Manual
provided with the DVD changer.

6

DXZ435

[DISP] button · When the button is pressed and held,
switches the disc titles or track titles while in the MD changer mode. · When the button is pressed and held, switches the user titles or track titles, etc. while in the CD changer mode. [TITLE] button · Use the button to input a title in the CD
changer mode. · Use the button to scroll the title during CD-
text play or MD changer play in the MD changer mode.
[UP], [DN] buttons · Select the disc.
[RDM] button · Perform random play. Also perform disc
random play when the button is pressed and held for 1 second or longer.
[RPT] button · Perform repeat play. When this button is
pressed and held for 1 second or longer, disc repeat play is performed.
[BND] button · Move the next disc in increasing order.
[SCN] button · Perform scan play for 10 seconds of each
track. Disc scan play is performed when the button is pressed and held for 1 second or longer.
[ ] button · Play or pause a CD, MD or DVD.
[a], [d] buttons · Select a track when listening to a disc. · Press and hold the button for 1 second or
longer to switch the fast-forward/fastbackward.
When the TV is connected
For details, see the section “TV operations”.
[P/A] button · Perform preset scan while in the TV mode.
When the button is pressed and held for 2 seconds or longer, auto store is performed.
[ ] button · Switch the TV picture mode or VTR (external)
picture mode.
[DIRECT] buttons · Store a station into memory or recall it
directly.
[a], [d] buttons · Select a station.
[BND] button · Switch the band. · When the button is pressed and held for 1
second or longer, switch seek tuning or manual mode.

DXZ435

7

English

5. DCP

The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car.
Removing the DCP
1. Press the [FNC] button for 1 second or longer to switch off the power.
2. Press in the [RELEASE] button.
[RELEASE] button
The DCP is unlocked 3. Remove the DCP.
DCP
Attaching the DCP
1. Insert the right side of the DCP into the main unit.
2. Insert the left side of the DCP into the main unit.
2.
DCP 1.

Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.)
DCP

DCP case
CAUTION
· The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.
· When the Release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after detaching it. (ee figure below.)
· The connector connecting the main unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.

DCP Rear Panel

Main Unit Front

DCP connector

Main unit connector

Note:
· If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.

DXZ435

9

English English

6. REMOTE CONTROL

Receiver for remote control unit

Remote control unit
[FUNC] [ ],[ ] [ISR] [MUTE] [SCN] [RPT]

Operating range: 30° in all directions Signal transmitter
[DUAL ZONE] [ ] [ ],[ ] [BAND] [DISP] [RDM]

Functions of Remote Control Unit Buttons

Mode Button

Radio

CD

CD/MD changer DVD changer

TV

[FUNC] Switches among radio, CD, CD/MD changer, DVD changer, TV and AUX. [BAND] Switches reception band.

Plays the first track. Moves the next disc Switches reception

Top play.

in increasing order. band.

[ ] , [ ] Increases and decreases volume (in all modes). [ ] , [ ] Moves preset channels up and
down.

Moves tracks up and down. When pressed and held for 1 second: Fast-forward /fast-backward.

Moves preset channels up and down.

[ ] No function.

Switches between playback and pause.

No function.

[MUTE] [ISR]

Turns mute on and off.
Recalls ISR radio station in memory. Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only).

[DISP] [SCN]

Switches among main display, sub display, clock display.

Preset scan. When pressed and held for 2 seconds: Auto store.

Scan play.

Scan play. When pressed and held for 1 second: Disc scan play.

Preset scan. When pressed and held for 2 seconds: Auto store.

Inserting the Batteries
1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow.
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.
Notes: Using batteries improperly can cause them to explode. Take note of the following points: · When replacing batteries, replace both batteries
with new ones. · Do not short-circuit, disassemble or heat batteries. · Do not dispose of batteries into fire or flames. · Dispose of spent batteries properly.

Rear side

10 DXZ435

AA (SUM-3, IECR-6/1.5V) Batteries
Rear cover

[RPT] No function.

Repeat play.

Repeat play. When pressed and held for 1 second: Disc repeat play.

No function.

[RDM] No function.

Random play.

Random play. When pressed and held for 1 second: Disc random play.

Switches between TV and VTR.

Some of the corresponding buttons on the main unit and remote control unit have different functions. [DUAL ZONE] button is not available.

11 DXZ435

English English

7. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).

CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Turning on/off the power
Note: · Be careful about using this unit for a long time
without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press the [FNC] button.
2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.
3. Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.
Note: · System check
The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM” and “PUSH PWR” appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.
Selecting a mode
1. Press the [FNC] button to change the operation mode.
2. Each time you press the [FNC] button, the operation mode changes in the following order:
Radio mode CD mode CD changer mode MD changer mode DVD changer mode TV mode AUX mode Radio mode… External equipment not connected with
CeNET is not displayed.
12 DXZ435

Adjusting the volume
Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
Press the [DISP] button to select the desired display. Each time you press the [DISP] button, the display switches in the following order:
Main display
Sub display
Clock display
Main display
Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.
When you have entered a title in a CD, it appears in the sub display. If you have not entered a title, “NO TITLE” appears in the title display instead. For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.
Setting the Z-Enhancer Plus
This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer. The factory default setting is “Z+ OFF”. Each time you press the [Z+] button, the tone effect changes in the following order:

Basic Operations

“Z+ OFF” “B-BOOST” “IMPACT” “EXCITE” “CUSTOM” “Z+ OFF” …

• B-BOOST

: bass emphasized

• IMPACT

: bass and treble emphasized

• EXCITE

: bass and treble emphasized mid deemphasized

• CUSTOM

: user custom

• Z+ OFF

: no sound effect

Adjusting the tone
Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:
When “B-BOOST” is set
“B-BOOST” “BAL 0” “FAD 0” Last function mode.
When “IMPACT” is set
“IMPACT” “BAL 0” “FAD 0” Last function mode.
When “EXCITE” is set
“EXCITE” “BAL 0” “FAD 0” Last function mode.
When “CUSTOM” is set
“BASS” “TREBLE” “BAL 0” “FAD 0” Last function mode.
When “Z+ OFF” is set
“BAL 0” “FAD 0” Last function mode.
Adjusting the bass (Gain, Frequency, Q-curve)
This adjustment can be performed when the ZEnhancer Plus is set to “CUSTOM”.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. The factory default setting is “B<G 0>”. (Adjustment range: ­6 to +6)
3. Press the [d] or [a] button to select “B<F 60>”.
Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency. The factory default setting is “B<F 60>”.
(Adjustment 60/100/200 Hz) 4. Press the [d] or [a] button to select “B<Q 1>”.
Turninng the [ROTARY] knob clockwise or counterclockwise to select the Q-curve.

The factory default setting is “B<Q 1>”. (Adjustment 1/1.25/1.5/2)
5. When the adjustment is complete, press the [A-M] button several times until the function mode is reached.
Adjusting the treble (Gain, Frequency)
This adjustment can be performed when the ZEnhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select “TREBLE”. 2. Turning the [ROTARY] knob clockwise
   emphasizes the treble; turning it counterclockwise attenuates the treble. The factory default setting is “T<G 0>”.
   (Adjustment range: ­6 to +6) 3. Press the [d] or [a] button to select
   “T<F 10>”. Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency. The factory default setting is “T<F 10>”.
   (Adjustment 10 kHz/15 kHz) 4. When the adjustment is complete, press the
   [A-M] button several times until the function mode is reached.
   Adjusting the balance
   1. Press the [A-M] button and select “BAL 0”. 2. Turning the [ROTARY] knob clockwise
   emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. The factory default setting is “BAL 0”.
   (Adjustment range: L13 to R13) 3. When the adjustment is complete, press the
   [A-M] button several times until the function mode is reached.
   Adjusting the fader
   1. Press the [A-M] button and select “FAD 0”. 2. Turning the [ROTARY] knob clockwise
   emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. The factory default setting is “FAD 0”.
   (Adjustment range: F12 to R12) 3. When the adjustment is complete, press the
   [A-M] button several times until the function mode is reached.
   13 DXZ435

English English

Basic Operations
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the ZEnhancer Plus mode to adjust.
2. Press the [A-M] button and turning the [ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the ­ direction.
When “B-BST 0” is selected, you can adjust the bass in the range of ­3 to 3.
When “IMPACT 0” is selected, you can adjust the bass and treble in the range of ­3 to 3.
When “EXCITE 0” is selected, you can adjust the bass and treble in the range of ­3 to 3.
Press and hold the [Z+] button for 2 seconds or longer to change to the “CUSTOM” mode. Bass/treble characteristics become flat and the indication “Z+FLAT” is shown in the display. Press the [Z+] button again to change to the “Z+ OFF” mode.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
The factory default setting is off. 1. Press and hold the [A-M] button for 1
second or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” lights in the display.
2. Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. “M-B EX” goes off from the display.
Adjusting the subwoofer
When you default select one of mode (LPF50, LPF80, LPF120).
The factory default setting is “S-VOL 0”. (Adjustment range: ­6 to +6)
1. Press the [SW-VOL ] button to select the subwoofer volume increases or decreases.
2. Press and hold the [SW-VOL ] button, the subwoofer volume automatically increases or decreases.

Radio Operations

FM reception

For enhanced FM performance the

®

tuner includes signal actuated stereo control,

Enhanced Multi AGC, Impulse noise reduction

curcuits and Multipath noise reduction circuits.

Listening to the radio
1. Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.
PS: Programme service name
2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 FM2 FM3 AM FM1…
3. Press the [a] or [d] button to tune in the desired station.

Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning
1. Press the [BND] button and select the desired band (FM or AM).
If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2. Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.

Radio Operations
Manual tuning
There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the
desired band (FM or AM). If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available. 2. Tune in a station. Quick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. Step tuning: Press the [a] or [d] button to manually tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exist to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the
desired band (FM or AM). 2. Press the corresponding [DIRECT] button to
recall the stored station. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station into preset memory.
Manual memory
1. Select the desired station with seek tuning, manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1. Press the [BND] button and select the desired band (FM or AM).
2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1. Press the [P/A] button.
2. When a desired station is tuned in, press the [P/A] button again to continue receiving that station.
Note: · Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
Instant station recall (ISR)
Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.
ISR memory
1. Select the station that you wish to store in ISR memory.
2. Press and hold the [ISR] button for 2 seconds or longer.
Recalling a station with ISR
In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode.

14 DXZ435

15 DXZ435

English English

CD Operations

Loading a CD
Insert a CD into the centre of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts.

For CD (12 cm)

For single CD (8 cm)

CD SLOT

Notes:
· Never insert foreign objects into the CD SLOT.
· If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.

• Discs not bearing the

or

mark and

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may not be usable.

Loading 8 cm compact discs

No adapter is required to play an 8 cm CD.

Insert the 8 cm CD into the centre of the insertion slot.

Listening to a CD already inserted
Press the [FNC] button to select the CD mode. Play starts automatically. If no CD is loaded in the unit, “NO DISC” appears in the display.

Pausing play

1. Press the [ ] button to pause play. “PAUSE” appears in the display.
2. To resume CD play, press the [ again.

] button

Displaying CD titles
This unit can display title data for CD-text CDs and user titles input with this unit.
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] button for 1 second or longer, the title display changes in the following order:
User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc)…

Note: · If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the display.
Ejecting a CD
1. Press the [Q] to eject the CD. Take it out from the ejected position.
Note: · If you force a CD into before auto reloading, this
can damage the CD. If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto reload). 8 cm CDs are not auto reloaded. Be sure to remove it when ejected.
Selecting a track
Track-up 1. Press the [d] button to move ahead to the
beginning of the next track. 2. Each time you press the [d] button, the
track advances ahead to the beginning of the next track. Track-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track.
Fast-forward/fast-backward
Fast-forward Press and hold the [d] button for 1 second or longer. Fast- backward Press and hold the [a] button for 1 second or longer.
Top function
The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc.

CD Operations
Scan play
The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. The scan play is useful when you want to select a
desired track. 1. Press the [SCN] button to start scan play.
“SCN” lights in the display. 2. To cancel the scan play, press the [SCN] button again. “SCN” goes off from the display and the current track continues to play.
Repeat play
The repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RPT] button. “RPT” lights in the
display and the current track is repeated. 2. To cancel the repeat play, press the [RPT] button again. “RPT” goes off from the display and normal play resumes.
Random play
The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected randomly and play begins. 2. To cancel the random play, press the [RDM] button again. “RDM” goes off from the display and normal play resumes.

Operations Common to Each Mode
Turning the screen saver function on or off
This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display in a random order. You can turn on and off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. The factory default setting is “SS”. 1. Press and hold the [TITLE] button for 1
second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “SCRN SVR”. 3. Press the [ ] button. 4. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: OFF SS MESSAGE 5. Press the [ ] button to store the setting. 6. Press the [TITLE] button to return to the previous mode. The following illustration presents one of the
patterns which are shown when the screen saver function is turned on.
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored in memory and displayed for any mode. * The factory default setting is “WELCOME TO
CLARION”. 1. Press and hold the [TITLE] button for 1
second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “INPUT”. 3. Press the [ ] button. 4. Press the [a] or [d] button to move the cursor.

16 DXZ435

17 DXZ435

English English

Operations Common to Each Mode
5. Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following orders: Numbers Symbols Capital letters Numbers…
6. Turn the [ROTARY] knob to select the desired character.
7. Repeat step 4 to 6 to enter up to 30 characters for message.
8. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message.
9. Press the [TITLE] button to return to the previous mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT or MD. The factory default setting is “ON”. 1. Press and hold the [TITLE] button for 1
second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “SCROLL”. 3. Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”. ON: To scroll automatically. OFF: To scroll just 1 time when the title was changed or the title key was pressed. 4. Press the [TITLE] button to return to the previous mode.
Dimmer control
You can set the dimmer control on or off. The factory default setting is “ON”.

1. Press and hold the [TITLE] button for 1
   second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “DIMMER”. 3. Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”. 4. Press the [TITLE] button to return to the previous mode.

Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit. The factory default setting is “5”. (Adjustment
level:1to 8)
1. Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2. Press the [a] or [d] button to select “CONTRAST”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to adjust the contrast.
4. Press the [TITLE] button to return to the previous mode.
Setting LOW PASS FILTER
This function allows you to set the low-pass filter sub-woofer output. The factory default setting is “LPF 120”. 1. Press and hold the [TITLE] button for 1
second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “SW LPF”.
3. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
REAR LPF 50 LPF 80 LPF 120
4. Press the [TITLE] button to return to the previous mode.
Selecting AUX IN sensitivity
Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. The factory default setting is “MID”. 1. Press and hold the [TITLE] button for 1
second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “AUX SENS”.
3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from “HIGH”, “MID” or “LOW”.
4. Press the [TITLE] button to return to the previous mode.

Operations Common to Each Mode

Setting the clock

1. Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2. Press the [a] or [d] button to select “CLOCK”.
3. Press the [ ] button.
4. Press the [a] or [d] button to select the hour or the minute.
5. Turn the [ROTARY] knob clockwise or counterclockwise to set the correct time.

The clock is displayed in 12-hour format.

6. Press the [ memory.

] button to store the time into

7. Press the [TITLE] button to return to the previous mode.

Note:
· You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

Entering titles
Titles up to 8 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows.

Mode CD mode TV mode

Number of titles 50 titles 20 titles

CD changer mode DCZ625 connected CDC655Tz connected CDC1255z connected

Number of titles 100 titles 100 titles 50 titles

1. Press the [FNC] button to select the mode you want to enter a title (CD, CD changer or TV).
   2. Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title.
   3. Press the [DISP] button and display the sub.
   4. Press the [TITLE] button. The cursor position flashes.
   5. Press the [a] or [d] button to move the cursor.

2. Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following order: Numbers Symbols Capital letters Numbers…
   7. Turn the [ROTARY] knob to select the desired character.
   8. Repeat steps 5 to 7 to enter up to 8 characters for the title.
   9. Press and hold the [ ] button for 2 seconds or longer to store the title into memory and cancel title input mode.
   Clearing titles
   1. Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title.
   2. Press the [DISP] button and display the sub. 3. Press the [TITLE] button.
   The display switches to the title input display. 4. Press the [BND] button.
   5. Press and hold the [ ] button for 2 seconds or longer to clear the title and cancel title input mode.
   AUX function
   This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.

18 DXZ435

19 DXZ435

English English

8. OPERATIONS OF ACCESSORIES

CD/MD Changer Operations

CD/MD changer functions
When an optional CD/MD changer is connected through the CeNET cable, this unit controls all CD/MD changer functions. This unit can control a total of 2 changers.
Press the [FNC] button and select the CD(MD) changer mode to start play. If 2 CD(MD) changers are connected, press the [FNC] button to select the CD(MD) changer for play. If “NO MAG” appears in the display, insert the
magazine into the CD changer. “DISC CHK” appears in the display while the player loads (checks) the magazine. If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer. If “NO DISC” appears in the display, load MDs into the MD changer. Note: · Some CDs recorded in CD-R/CD-RW mode may not be usable.
CAUTION
CD-ROM discs cannot be played from every CD changer, it’s depended on the model.
Pausing play
1. Press the [ ] button to pause play. “PAUSE” appears in the display.
2. To resume play, press the [ ] button again.
Displaying CD titles
This unit can display title data for CD-text CDs and user titles input with this unit. Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz. When connected to CDC655z or CDC1255z.
Press the [DISP] button to display the title.
When connected to DCZ625 or CDC655Tz
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] button for 1 second or longer, the title display changes in the following order:
User title (disc) CD-text title (disc) Artist title CD-text title (track) User title (disc)…

Notes: · If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the display. · If a CD-text CD is not input its disc title or a track title, “NO TITLE” appears in the display.
Switching disc titles and track titles (MD)
This unit can display disc titles and track titles already entered on MDs. Titles cannot be entered for MDs with this unit. 1. Press [DISP] button to display the title. The
disc title or track title is displayed. 2. Each time you press and hold the [DISP] button for 1 second or longer, the display toggles between the disc title and the track title. Note: · If an MD is not input its disc title or a track title, “NO TITLE” appears in the display.
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”. (The factory default setting is “ON”. Refer to the subsection “Turning the screen saver function on or off” in section “Operation common to each mode”.) When set to “ON” The title is automatically kept scrolling. When set to “OFF” Press the [TITLE] button to scroll the title.
Selecting a CD
[DN] or [UP] button correspond to a disc load in the magazine. Press the [DN] or [UP] button to select the desired disc. If a CD is not loaded in a slot of magazine, “NO
DISC” appears in the display.

20 DXZ435

CD/MD Changer Operations
Selecting a MD
[DN] or [UP] button correspond to a MD load in the MD changer. Press the [DN] or [UP] button to select the desired disc. If a MD is not loaded in a slot of MD changer, “NO
DISC” appears in the display.
Selecting a track
Track-up 1. Press the [d] button to move ahead to the
beginning of the next track. 2. Each time you press the [d] button, the
track advances ahead to the beginning of the next track. Track-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track.
Fast-forward/fast-backward
Fast-forward Press and hold the [d] button for 1 second or longer. Fast- backward Press and hold the [a] button for 1 second or longer.
Scan play
Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. The scan play is useful when you want to select a
desired track. 1. Press the [SCN] button to start track
scanning. “SCN” lights in the display. 2. To cancel the scan play, press the [SCN] button again. “SCN” goes off from the display and the current track continues to play.
Disc scan play
Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD (MD) changer. This function continues automatically until it is cancelled. Disc scan play is useful when you want to select a
desired CD (MD). 1. Press and hold the [SCN] button for 1
second or longer. “DISC” and “SCN” light in the display and disc scan play starts.

2. To cancel disc scan play, press the [SCN] button again. “DISC” and “SCN” go off from the display and the current track continues to play.
   Repeat play
   Repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RPT] button. “RPT” lights in the
   display and the current track is repeated. 2. To cancel repeat play, press the [RPT] button
   again. “RPT” goes off from the display and normal play resumes.
   Disc repeat play
   After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. 1. Press and hold the [RPT] button for 1 second
   or longer. “DISC” and “RPT” light in the display and disc repeat play starts.
3. To cancel disc repeat play, press and hold the [RPT] button again. “DISC” and “RPT” go off from the display and normal play resumes on the current track.
   Random play
   Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. “RDM” lights in the
   display and random play begins. 2. To cancel random play, press the [RDM] button again. “RDM” goes off from the display and normal play resumes.
   Disc random play
   The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled. 1. Press and hold the [RDM] button for 1
   second or longer. “DISC” and “RDM” light in the display and disc random play starts. 2. To cancel disc random play, press and hold the [RDM] button again. “DISC” and “RDM” go off from the display and normal play resumes from the current track.
   21 DXZ435

English English

TV Operations
TV tuner functions
When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor.
Watching a TV
1. Press the [FNC] button and select the TV mode.
2. Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2.
3. Press the [a] or [d] button to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press the [ ] button to select VTR. 2. To return to the TV broadcast, press the
[ ] button.
Tuning
There are 3 types of tuning mode available, Seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired TV band (TV1 or TV2). If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2. Press the [a] or [d] button to automatically seek a station. Press the [d] button to automatically tune up the frequency band to the next available TV station; press the [a] button to automatically tune down.

Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1. Press the [BND] button and select the desired band (TV1 or TV2). If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” lights in the display and manual tuning is now available.
2. Tune in a station.
Quick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station.
Step tuning: Press the [a] or [d] button to manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
2. To recall a stored TV station, press the desired [DIRECT] button to select that station. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
Manual memory
1. Select the desired station with seek tuning, manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

TV Operations
Auto store
Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory.

1. Press the [BND] button and select the
   desired TV band (TV1 or TV2). 2. Press and hold the [P/A] button for 2
   seconds or longer. The stations with good reception are stored automatically to the preset channels.
   Preset scan
   Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory. 1. Press the [P/A] button. 2. When the desired station is found, press the
   [P/A] button again to remain tuned to that station. Note: · Do not press and hold the [P/A] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.
   Setting the TV diver
   You can change the reception setting for the TV antenna connected to the TV tuner. 1. Press and hold the [TITLE] button for 1
   second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “TV DIVER”. 3. Turn the [ROTARY] knob clockwise to set to “ON” or counterclockwise to set to “OFF”. ON: Sets reception emphasizing the visual. OFF: Sets the diver setting to OFF. 4. Press the [TITLE] button to return to the previous mode.

Setting the TV area
When you select the TV area (TV reception area), the TV tuner area setting changes.
1. Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.
2. Press the [a] or [d] button to select “TV AREA”.
3. Press the [ ] button.
4. Turn the [ROTARY] knob clockwise or counterclockwise to select the reception area.
5. Press the [ ] button.
6. Press the [TITLE] button to return to the previous mode.
The above operations are required when a TV tuner other than TTX7501z is connected.

22 DXZ435

23 DXZ435

English English

General

9. IN CASE OF DIFFICULTY

Problem
Power does not turn on. (No sound is produced.)

Cause Fuse is blown.
Incorrect wiring.

Measure
Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase.
Consult your store of purchase.

No sound output when operating the unit with amplifiers or power antenna attached.

Power antenna lead is shor- 1. Turn the unit off.

ted to ground or excessive 2. Remove all wires attached to the power

current is required for re-

antenna lead. Check each wire for a possible

mote-on the amplifiers or

short to ground using an ohm meter.

power antenna.

3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the

power antenna lead one by one. If the

amplifiers turn off before all wires are

attached, use an external relay to provide

remote-on voltage (excessive current

required).

Nothing happens when buttons are pressed.
Display is not accurate.

The microprocessor has malfunctioned due to noise, etc.

Turn off the power, then press the [RELEASE] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod.

Reset button

DCP or main unit connec- Wipe the dirt off with a soft cloth moistened with

tors are dirty.

cleaning alcohol.

Compact disc cannot Another compact disc is al- Eject the compact disc before loading the new

be loaded.

ready loaded.

one.

Sound skips or is noi- Compact disc is dirty. sy.

Clean the compact disc with a soft cloth.

Compact disc is heavily scratched or warped.

Replace with a compact disc with no scratches.

Sound is bad directly after power is turned on.

Water droplets may form on Let dry for about 1 hour with the power on. the internal lens when the car is parked in a humid place.

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem.

CD

CD changer

Error Display

Cause

Measure

ERROR 2

A CD is caught inside the CD deck and is not ejected.

This is a failure of CD deck’s mechanism and consult your store of purchase.

ERROR 3

A CD cannot be played due to scratches, etc.

Replace with a non-scratched, non-warpeddisc.

ERROR 6

A CD is loaded upside-down inside the CD deck and does not play.

Eject the disc then reload it properly.

ERROR 2

A CD inside the CD changer is not loaded.

This is a failure of CD changer’s mechanism and consult your store of purchase.

ERROR 3

A CD inside the CD changer cannot be played due to scratches, etc.

Replace with a non-scratched, non-warped disc.

ERROR 6

A CD inside the CD changer cannot be played because it is loaded upside-down.

Eject the disc then reload it properly.

ERROR H

Displayed when the temperature in the MD changer is too high and playback has been stopped automatically.

Lower the surrounding temperature and wait for a while to cool off MD changer.

ERROR 2

An MD inside the MD changer is not loaded. This is a failure of MD changer’s mechanism and consult your store of purchase.

ERROR 3

An MD inside the MD changer cannot be played due to scratches, etc.

Replace with a non-scratched, non-warped disc.

ERROR 6

An MD inside the MD changer cannot be played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is loaded in the MD changer.

Load a pre-recorded MD in the MD changer.

ERROR 2

A DISC inside the DVD changer cannot be played.

This is a failure of DVD mechanism and consult your store of purchase.

ERROR 3

A DISC cannot be played due to scratches, Retry or replace with a non- scratched, non-

etc.

warped-disc.

ERROR 6

A DISC inside the DVD changer cannot be played because it is loaded upside- down.

Eject the disc then reload it properly

ERROR P

Parental level error

Set the correct Parental level.

ERROR R

Region code error

Eject the disc and replace correct region code disc.

MD changer

DVD changer

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

CD

24 DXZ435

25 DXZ435

English

11. SPECIFICATIONS

FM Tuner
Frequency Range: 87.0 MHz to 108 MHz
Usable Sensitivity: 9 dBf
50dB Quieting Sensitivity: 15 dBf
Alternate Channel Selectivity: 70 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response (±3 dB): 30 Hz to 15 kHz
AM Tuner
Frequency Range: 531 kHz to 1602 kHz
Usable Sensitivity: 25 µV
CD Player
System: Compact disc digital audio system
Usable Discs: Compact disc
Frequency Response (±1 dB): 10 Hz to 20 kHz
Signal to Noise Ratio (1 kHz): 100 dB
Dynamic Range (1 kHz): 95 dB
Harmonic Distortion: 0.01%

Audio
Maximum Power Output: 208 W (52 W 4 ch)
Continuous Average Power Output: 17 W 4, into 4 , 20 Hz to 20 kHz, 1%THD
Bass Control Action (60 Hz): ±15 dB
Treble Control Action (10 kHz): ±12 dB
Line Output Level (CD 1 kHz): 2 V
General
Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground
Current Consumption: Less than 15 A
Speaker Impedance: 4 (4 to 8 allowable)
Weight / Source unit: 2.64 lb. (1.2 kg)
Weight / Remote control unit: 1 oz. (30 g) (including battery)
Dimensions / Source unit: 7″ (Width) 2″ (Height) 6-1/8″ (Depth) [178 (W) 50 (H) 155 (D) mm] Dimensions / Remote control unit: 1-3/4″ (Width) 4-5/16″ (Height) 1-1/8″ (Depth) [44 (W) 110 (H) 27 (D) mm]

Note: · Specifications and design are subject to change without notice for further improvement.

26 DXZ435

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>