Sunbeam AF5000/AF5100 Halo+ DuraCeramic Air Fryer User Guide

June 6, 2024
Sunbeam

Sunbeam AF5000/AF5100 Halo+ DuraCeramic Air Fryer

Sunbeam’s Safety Precautions

Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:

  • Read carefully and save all the instructions provided with an appliance.
  • Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug – do not pull on the cord.
  • Turn the power off and remove the plug when the appliance is not in use and before cleaning.
  • Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
  • Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • The temperature of accessible surfaces may be high when the appliance is operating.
  • Never leave an appliance unattended while in use.
  • Do not use an appliance for any purpose other than its intended use.
  • Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.
  • Do not place on top of any other appliance.
  • Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
  • Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.
  • For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.
  • Do not immerse the appliance in water or any other liquid unless recommended.
  • Appliances are not intended to be operated by means of an external timer or separate remote control system.
  • This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.

Features of your Sunbeam Air Fryer

Control Panel

Accessories

Using your Air Fryer handle

Only use the handle to remove the bowl after cooking has finished. Remember the bowl will be very hot! Don’t set the bowl down on a surface that may be damaged by heat.
After cooking, you can use the detachable bowl handle to remove the inner bowl and its contents safely.

  1. Make sure that the jaws of the handle are open. Press the button on the handle to open the jaws if required.

  2. Place the bowl handle over the lip of the inner bowl.

  3. Slide the lever forward until it clicks. The handle will grip the inner bowl. Let the lever return to its rest position.

  4. Lift the inner bowl out of the Halo+ air fryer body.

  5. To release the bowl, place bowl on flat surface then press the button on the handle.

  6. Lift the handle off the rim of the bowl.

DuraCeramic™ bowl

This product features the exclusive DuraCeramic™ coating from Sunbeam®. This specialised natural ceramic coating is designed to transfer heat quicker and more efficiently than standard non-stick coatings ­ meaning faster cooking times for your delicious home-cooked meals. In addition, the DuraCeramic™ coating is scratch resistant and 4 times more durable than standard non-stick coatings ­ this is a product built to last. Peace of mind comes from the fact that DuraCeramic™ is PTFE and PFOA free, so not only is this exclusive coating durable and easy to clean, it’s also natural and super safe for the whole family.

Unpack the appliance and remove all packaging, promotional materials and stickers. Remove all printed documents. Wash the inner bowl, measuring spoon, roasting rack, drip tray and bowl handle in hot soapy water. Rinse then dry all of the parts. Wipe the body and lid with a damp cloth only–see page 13 for cleaning instructions.
We recommend that you wash the inner bowl by hand only, in order to preserve the DuraCeramic™ coating.

Never immerse any part of the Halo+ air fryer body, power cord or plug in water or any other liquid. Before assembling or disassembling your Halo+ air fryer, ensure it is unplugged and all parts are cool.

| Hot Surface Do Not Touch
---|---
This symbol indicates, temperature of accessible surfaces may be high when the appliance is operating and for some time after use.

Using your Air Fryer: Chips

WARNING: When your Halo+ air fryer is in the tilted position, the lid will not stay open on its own and may close unexpectedly. Always return the appliance to the level position before opening the lid.

Your Halo+ air fryer can be used to cook fresh or frozen chips.

  1. Press the lid latch button and open the lid.

  2. Fit the inner bowl over the central shaft.

  3. Add the chips to the bowl. Distribute the chips evenly over the bottom of the bowl. Don’t exceed 1.25kg of fresh chips or 1kg frozen chips.

  4. Add the recommended quantity of oil to the chips using the oil measuring spoon. Spread the oil evenly over the chips. Please refer to our food cooking guide on page 10.

  5. Close the lid and plug your Halo+ air fryer into a suitable mains supply and switch the socket on. Your Halo+ air fryer will beep, the display will light up blue and after a second or two will show .

  6. Use the + button to enter the desired cooking time in minutes. If you keep your finger on the + button, the time will increase quickly.
    Next, pull the tilt mechanism lock outwards and tilt your Halo+ air fryer forwards using the handle. Release the tilt lock to lock your Halo+ air fryer in the fully tilted position. When in the correct position, the TILT icon will show in the window of the tilt lock.

  7. Press the dual heat mode ( ) button to start cooking. The display will turn orange, the heater will illuminate and the fan will start. The timer will start to count down in minutes until 1 minute remains then it will count down in seconds.

  8. When the cooking time has ended, your Halo+ air fryer will beep and the heater will turn off.

NOTES
The cooking time can be adjusted up or down during cooking using the + or ­ buttons.
During cooking, you may open the lid if required. First, set your Halo+ air fryer to the level position then press the lid release button. Opening the lid will switch off the heater and the fan, and the timer will stop counting down. To restart cooking, close the lid then return your fryer to the tilted position. Cooking will resume when you close the lid and the timer will continue to count down.
During cooking, the heater will switch on and off from time to time. This is normal and allows your Halo+ air fryer to maintain an even cooking temperature.
You can cancel cooking at any time by pressing and holding either the dual heat mode button or the grill mode button for 3 seconds. Your Halo+ air fryer will beep, the display will return to and cooking will be cancelled.

Using your Air Fryer: Grilling

Grilling

Your Halo+ air fryer comes with a dishwasher safe rack suitable for grilling and other types of cooking. Foods can also be cooked directly in the removable bowl. Use whichever method gives you the best results.

  1. Press the release button and open the lid. Place the rack into the inner bowl. For best results lightly oil the rack before use.

  2. Place the food on the rack (if you are using it). The rack and food will rotate during cooking so make sure that the food will not touch any part of the heater/fan assembly or other part of the lid when it is closed.

  3. If required, add oil evenly over the food.

  4. Close the lid and plug your Halo+ air fryer into a suitable mains supply and switch the socket on. Your Halo+ air fryer will beep, the display will light up blue and after a second or two will show .

  5. Use the + button to enter the desired cooking time in minutes. If you keep your finger on the + button, the time will increase quickly. If you overshoot the desired time, use the ­ button to adjust the time.
    When grilling, your Halo+ air fryer should be in the level position (the LEVEL icon will show in the window of the tilt lock).

  6. Press the grill mode button to start cooking. The display will turn orange, the heater will illuminate and the fan will start. The timer will start to count down in minutes until 1 minute remains then it will count down in seconds.

  7. When the cooking time has ended, your Halo+ air fryer will beep and the heater will turn off.

NOTES This product has been designed to cook foods in a healthier way. We do not recommend that you use your Halo+ air fryer to cook foods which are very fatty e.g. chicken portions (with the skin on), lamb chops, sausages or other fatty cuts of meat.
Dual Heat cooking mode without tilting To tilt or not to tilt….
Your Halo+ air fryer can be used to cook the foods and recipes that you would normally cook in a standard oven or saucepan. However, when your Halo+ air fryer is tilted, the food inside is `tumbled’ which may damage fragile foods such as salmon, jacket potatoes, cupcakes, etc. You can use the dual heat mode cooking method without setting your Halo+ air fryer into the fully tilted position. The recipes that come with this product will give you more details on which method is best.

Food cooking guide

The following table provides basic cooking guidelines for popular, convenience and frozen foods. Please note that due to the variations in thickness and size of the foods being cooked, some experimentation may be required for the best cooking results. Always ensure that the food is thoroughly cooked and piping hot throughout before consuming.
When cooking fresh chips, we’ve kept the oil quantites as low as possible for the healthiest results. However, if you feel the chips are a little pale and require further browning, increase the quantity of oil slightly.
Note that we use standard oven chips in our frozen chip testing. Standard frozen oven chips are pre-coated with oil, so there is no need for you to add any further oil.

Food

| Cooking Time (mins)| Notes| Roasting rack| GRILL **Mode

| DUAL HEAT Mode

| Tilted**|

**Oil

**

---|---|---|---|---|---|---|---

1.25kg fresh chips

| 45-50| Wash and pat dry| –| –| YES| YES|

1

1.0kg fresh chips

| 40-45| Wash and pat dry| –| –| YES| YES| 1
800g fresh chips| 35-40| Wash and pat dry| –| –| YES| YES|

½ – ¾

500g fresh chips

| 25-35| Wash and pat dry| –| –| YES| YES| ¼ – ½
250/300g fresh chips| 20-25| Wash and pat dry| –| –| YES| YES|

¼

1.0kg fresh wedges

| 40-45| Wash and pat dry| –| –| YES| YES| ½
1.0kg frozen chips| 40| –| –| –| YES| YES|

500g frozen chips

| 20-25| –| –| –| YES| YES| –
250/300g frozen chips| 15| –| –| –| YES| YES|

140/180g jacket potato

| 40| Prick with a fork and lightly rub with oil| –| –| YES| NO|

Salmon fillet

| 15-20| Lightly oil grill rack| YES| YES| –| NO| –
Boneless, skinless chicken fillet|

25-30

| Lightly oil grill rack.
Turn once.| YES| YES| –| NO|

Porterhouse steak

| 5-10| Lightly oil grill rack.

Turn once.

| YES| YES| –| NO| –
Premium Sausages| 10-12| Turn once.| YES| YES| –| NO|

Bacon

| 8-10| Turn once.| YES| YES| –| NO| –
Cheese on toast| 2-3| Toast the bread in a toaster first.| YES| YES| –| NO|

Fish fingers

| 10-12| Lightly oil grill rack.
Turn once.| YES| YES| –| NO| –
Frozen pizza| 5| Cut into slices to fit rack.| YES| YES| –| NO|

Individual frozen pies

| 25-30| Place directly into the inner bowl| –| –| YES| NO| –
Fresh garlic baguette|

8-10

| Cut in half. Place directly into the inner bowl.|

|

|

YES

|

NO

|

NOTE
For frozen chips, best results are achieved with thick straight cut varieties.

Guide to oils and fats

Using your Halo+ air fryer to cook food will help you to reduce the amount of oil needed in some recipes, which may benefit your diet.
The table below lists some of the more widely available, popular oils. All of them can be used in your Halo+ air fryer. However, for best results, we recommend Vegetable oil.

Oil Type Use
Vegetable oil Shallow, deep and stir frying.
Sunflower oil Shallow, deep and stir frying.
Olive oil Shallow and stir frying. Marinades, dressings, drizzling.
Sesame oil Shallow, deep and stir frying. Marinades, drizzling.
Peanut oil Shallow and stir frying. Dressings. Adds a nutty flavour.
  • You can also use low calorie cooking spray in your Halo+ air fryer.
  • Always ensure that the ingredients are evenly coated with oil.

Care and cleaning

Always unplug your Halo+ air fryer and allow it to cool completely before cleaning it. NEVER immerse the MAIN body, power cord or plug in water or any other liquid.
To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent.

  • Carefully wipe any oil spatter from the heater/fan assembly cover with kitchen paper. Wipe over the outer body and lid with a clean, slightly damp cloth and dry.
  • Wash the removable clear lid, roasting rack, oil measuring spoon, inner bowl, drip tray and bowl handle with warm soapy water using a cloth, sponge or brush. Dry completely before use or storage.
  • The roasting rack, oil measuring spoon and drip tray may be washed in a dishwasher. We recommend that you wash the inner bowl by hand only, in order to preserve the DuraCeramic™ coating.

To remove the clear lid:

  1. Press and hold in the two lid release buttons (one on each side)
  2. Lift off the clear lid.
  3. To refit the lid, position the lid over the tongue on the top of the body as shown then pivot the lid into place until the locks on each side click.

Troubleshooting

Problem Possible Reason Solution
Halo+ air fryer does not turn on
  • Lid is open.
  • Timer is not set.

|

  • Ensure lid is fully closed.
  • Use the + button on the control panel to set the time.

Food is not evenly cooked|

  • Too much food in inner bowl.
  • Incorrect setting used.

|

  • Remove food from the bowl and cook in smaller batches.
  • For even cooking select the Dual Heat Mode button.

Chips are not crispy|

  • Potatoes have too much starch in them.
  • Old potatoes used.
  • Not enough oil added.
  • Potatoes cut too large.

|

  • Wash potatoes thoroughly and dry before frying.
  • Use fresh potatoes.
  • Add slightly more oil.
  • Cut potatoes into smaller pieces.

Chips not evenly cooked|

  • Food cooked with air fryer in incorrect position.

|

  • Cook food in TILT position.

WARRANTY

This Sunbeam product is covered by a 12 month replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law [if your product was purchased in Australia] or New Zealand Consumer Guarantees Act [if your product was purchased in New Zealand].

Upon receipt of your claim, Sunbeam will seek to resolve your difficulties or, if the product is defective, advise you on how to obtain a replacement or refund.

To assist us in managing warranty claims, we recommend you register your product as soon as practicable after purchase by creating a MySunbeam account on our website and uploading a copy of your original receipt.

In order to make a claim under our warranty, you must have the original proof of purchase documentation for the product and present it when requested (if not already uploaded to our website).

Should your product develop any defect within 12 months of purchase because of faulty materials or workmanship, we will replace or repair it, at our discretion, freeof charge. A product presented for repair may be replaced by a refurbished product of the same type rather than being repaired. Refurbished parts may be used to repair the product.

Our replacement or repair warranty only applies where a defect arises as a result of faulty material or workmanship during the warranty period. Your warranty does not cover misuse or negligent handling (including damage caused by failing to use the product in accordance with this instruction booklet), accidental damage, or normal wear and tear.

Your warranty does not:

  • cover freight or any other costs incurred in making a claim, consumable items, accessories that by their nature and limited lifespan require periodic renewal (such as filters and seals) or any consequential loss or damage; or

  • cover damage caused by:
    – power surges, power dips, voltage supply problems, or use of the product on incorrect voltage;
    servicing or modification of the product other than by Sunbeam or an authorised Sunbeam service centre;
    – use of the product with other accessories, attachments, product supplies, parts or devices that do not conform to Sunbeam specifications; or
    – exposure of the product to abnormally corrosive conditions; or

  • extend beyond 3 months if the product is used in commercial, industrial, educational or rental applications.

The benefits given to you by our warranty are in addition to other rights and remedies under law in relation to the product.

In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Our goods also come with guarantees that cannot be excluded under the New Zealand Consumer Guarantees Act.

If your warranty claim is not accepted, we will inform you and if requested to do so by you, repair the product provided you pay the usual charges for such repair. You will also be responsible for all freight and other costs.

Should your product require repair or service after the warranty period, contact your nearest Sunbeam service centre. For a complete list of Sunbeam’s service centres, visit our website or call our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.

Should you experience any difficulties with your product during the warranty period, please contact our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand.

Australia
www.sunbeam.com.au
1300 881 861 Suite 1, Level 1, 13 Lord Street, Botany NSW 2019 Australia

New Zealand
www.sunbeam.com.nz
0800 786 232 Unit 3, Building D, 26 Vestey Drive, Mt Wellington Auckland New Zealand

 **Need help with your appliance?**

Contact our customer service team or visit our website for information and tips on getting the most from your appliance.

Australi a | visit www.sunbeam.com.au
phone 1300 881 861
mail Suite 1, Level 1, 13 Lord Street, Botany NSW 2019 Australia.

New Zealand | visit www.sunbeam.co.nz
phone 0800 786 232
mail Level 6, Building 5, Central Park, 660–670 Great South Road, Greenlane, Auckland.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals